Self-harm is common among young people in Sweden. Therefore people who work with these young people need to have knowledge about self-harm to be able to provide the right help. The aim of this study was to investigate how the individual experience self-harm, and how this could be understood. The empirical material has been based on consisted of 28 life stories. 24 of them were written by women and 4 by men.

This report deals with prefabricated bathrooms and the advantage, during the production process, they have compared to ordinary produced bathrooms.The work is done together with the building company JM. The common task is to investigate if the manufactures, in spite of standardized design can meet the concept of JM, i.e. high flexibility and adjustment towards the customer. In JM they are doubtful to the method, as they did not yet worked with prefabricated modules and think that the choises for the costumer will be limited.There will be a short resume of the progress of the bathrooms and its importance as sanitary and wellbeing.The recent problems with damage caused by damp in bathrooms. Have resultade in regulations.

Qigong was initiated by the Chinese government in the 1950´s as a domestic medical tradition to be included within a modern scientific framework. During the first decades it became popular among the élite. During the 70´s and 80´s scientific confirmation of the existence of qi contributed to its immense popularity among the population. Charismatic leaders with a traditional background were leading their groups in parks and the movement was booming. In 1992 Falun Gong was established by Li Hongzhi as qigong taken to a higher level.

Due to the globalization and the changes in the market, companies have now realized the importance of a strong brand. This has led to the phenomena outsourcing. The relation between the branding consultant and his or her client has changed. Earlier the consultants worked as a single unit and were given a task to independently accomplish the assignment. Today there has to be co-operation between the two parties.

In this report you can get a complete instruction about how to build your own development system for the PIC-processor. This card will be used for laborations for the students at LITH-ITN. With this card you can send new assembler codes (new instructions) down to the microprocessor via the Serialport on your computer. Then the new instructions for the microprocessor will start to execute. We made a solder paste stencil at Campus Norrköping solder paste stencil laboratory.

TitleThe communicative office ? A study of the effects that Activity based offices has on internal communication.      Authors                             Carl Varli, Jonas Eklund and Petter Göransson Course                              Business administration III ? Organization ? Bachelor? thesis Tutor                                 Olle Duhlin           Examiner                          Mikael Lundgren Background                      The prime focus of activity based office designs are the though of choosing your workplace along with your work task, instead of the other way around. This means that you do not longer have a set workstation of your own, you move around according to where to your current work will be best performed.  Problem                           We want to explore how the communication within a company?s departments has been affected by the introduction of an activity-based office design.Purpose                             The purpose of this study was to get an understanding of how this office design could effect the communication within companies that uses it. Further more, we wanted to study the effects that this kind of office would have on the communication within a department.

ABSTRACTJuvenile is a phenomena that more or less always has been around in our societies. From a society perspective, a crime is committed if actions that the legislative power of state consider as unacceptable or actions that are punishable. There is no particular explanation to why certain people become criminal; crime can be caused by many different factors at the same time. There are several types of justice. In this essay, it is reparative justice for shoplifting in force, that will be illustrated.The purpose of this essay is to investigate how the shopkeepers experience incidents such as shoplifting or theft in their stores, and how they will react and act if they will be exposed by circumstances like that.

This report is the result of a master thesis carried out by the author, student at the Royal Instituteof Technology(KTH). The task was performed as a product development process at a companycalled Ameibo AB, located in Stockholm. It is the final task of the studies at the Master'sprogramme Design and Product Realization. The report is structured in a chronological order anddescribes the methods used, the implementation of these methods and a presentation of theresults given from these studies.Ameibo is a company located in Stockholm, distributing films on the internet. The aim of thismaster thesis was to investigate the possibilities of entering the market for portable devices.

So- called ?Network Based Defense? (NBD) was introduced in Sweden in connection with the transformation of the Swedish Armed Forces in 1999. NBD is based on the U.S. variant Network Centric Warfare (NCW), which in turn is derived from research on the concept of Revolution in Military Affairs (RMA). In Sweden the concept was introduced and included not only the Armed Forces but was intended to also support the Swedish civilian agencies in order to create networks and hence share the available information and thus more effective crisis management and to provide more "bang for the buck." In developing the concept of NBD the Swedish Armed Forces used both economic and human resources, in the form of research, new technologies, new organization and new methods.Between year 2004 and 2006 the Armed Forces once again entered the process of reorganization.

Nimo Verken AB is the leading producer in the Scandinavia of drying cabinets. The construction has, with small changes, been the same since the 70s with a thermostat and a timer as controlling system. There was a wish to develop a modern cabinet which showed remaining time on a display and with energy saving functions.In this report we go through how it is possible to implement a digital controlling system, where remaining time is shown on a display and where it is possible to choose a preset ?program?.The report first presents the fundamental theory for a PIC, where we describe the different registers, how interrupts are handled, the internal clock function and how data is sent to control the different parts of the construction.Next the report presents and describes the new hardware that is needed, such as the encoder, the temperature sensor and the display.After the theory we describe how the program in the PIC may be drafted. Last in the report we have the result of the tests of the temperature variations and the accuracy of the time..

This thesis describes the universalization, improvement and further development of acompact crane support frame for flatbed trucks. The work has been conducted at Eloch Fordonsteknik AB (henceforth EFAB) in Uppsala.The aim of the work has been to shorten the assembly time of the product. By doingso, the product can be kept on shelf, which in turn results in shorter lead time. Thishas been done by universalizing the support frame to be compatible with most of thechassis EFAB works with. Additionally, the entire construction has been made lighter,which will make it a more attractive choice for customers.A pre-study was conducted and information was gathered internally, as well asexternally, in order to ascertain that no limitation or possibility was overlookedduring the course of the project.One such limitation has been the geometry of the truck bed that the support frameshall be compatible with.

Questions about discipline have always been current within the Swedish school system, from the sixteenth century until today. The purpose of this study is to compare the discipline in two old-time elementary schools, located on Gotland, with each other.This study will compare an old-time elementary school from the countryside with an old-time elementary school from a town to show the differences in discipline between the coun-tryside and a town. This study will also focus on how questions about discipline changes from 1847 to 1937/1941. In order to do so I have studied the regulations from the two schools and compared them with each other. When I discuss discipline I will use Michel Foucault?s theory concerning the development of power and discipline in modern society.My study shows that it did not differ much in questions of discipline between the two ex-amined old-time elementary schools.

The task of constructing a transmission has been provided to us by Digital Engineering, which is a company located in Hovmantorp. After meeting with Digital Engineering we started immediately with the brainstorming to find different ideas with pen and paper. After having presented a number of concepts for the company, we had finally chosen a winner. For the gearbox to be able to work in a good way the tension must never exceed the strain limit of the material. A prototype of the gearbox was produced by TKB Modell.

This report is the result of a master thesis at the Department of Mechanical Engineering, Division of Industrial and Economical Development, at Linköping University of Technology. The project was carried out on behalf of Fanerami AB, Mjölby and includes 20 weeks of full time schedule work.Cabinets with vertical mounted roller shutters all share the same problem, namely weight balancing. A roller shutter has an equilibrium area where the sum of the different forces acting on the shutter equals zero. As the shutter leaves that area it will pick up speed as it falls towards the bottom. When the shutter hits the bottom of the cabinet there is a potential risk of getting fingers caught and in this project a solution to prevent this from happening was to be presented.In this project, three concepts have been generated with the following different purposes:?In concept 1 the risk of getting any fingers caught when the shutter closes was to be eliminated in an efficient and inexpensive way.?In concept 2 the roller shutter had to be balanced at all time providing the possibility to keep the cabinet open in any position.?The last and most challenging task was to create a remote controlled TV cabinet.

Efficient numerical methods for option pricing is an active field of research. This project has the goal to examine possible ways to improve an established method of numerical pricing. The method is based on an adaptive finite difference method in price and uses the backwards differentiation formula of order 2, BDF2, in time. The project will focus on improvements to the time integration through implementation of discontinuous Galerkin methods, dG. Empirical convergence and accuracy results are obtained for equidistant dG-methods up to order 3 and performance is compared to BDF2.