There are two objectives of this study.The first one was to study the new instrument Deltack fromPrufbau, and with the new knowledge, study the interaction between blanket and paper.Deltack is a new instrument to measure the ink splitting force. Blankets from an earlier study doneby GATF have been montered on 12 different Deltack print forms and those have together with Deltackbeen the base for this project.This study together with information from GATF?s study shows that some of the blankets have ahigher capability to adsorb ink. Those blankets generate a sharper shape on the force curve, they havea lower dot gain, but they print not as good solid..

Uppsatsen avhandlar fredsframtvingande operationer och deras möjligheter till framgång.Internationella operationer är en av Försvarsmaktens huvuduppgifter och i samband med detta ärfredsframtvingande operationer en typ av operationer som svenska förband kan få delta i. Genomstudier av manöverkrigföringens principer och två begränsade fallstudier tas ett antal faktorer förframgång fram som sedan jämförs och diskuteras. Uppsatsen svarar även på ommanöverkrigföringens principer kan tillämpas vid fredsframtvingande operationer. Resultatet avuppsatsen är att faktorerna lämplig sammansättning av styrkorna, anpassad politisk styrning ochförmåga till att minska egna och civilas förluster är faktorer som har betydelse för framgång påden operativa nivån. Jag har också sett att de faktorer som man kan hämta urmanöverkrigföringen principer är betydelsefulla för möjligheterna till framgång.

This report is the result of a sub-project of a larger project to create a platform formathematical education. The sub-project focuses on authentication with associ-ated security, where security is emphasized. The project environment is Java EE 6where GlassFish 4.0 acts as the server. The project has been divided into threeparts; password encryption, Java EE authentication and brute force attack. Thepassword encryption part focuses on examining different hash functions executionspeed, the result shows that none of the examined hash algorithms is suitable fordirect use.

This report reflects an examination work performed for Getrag All Wheel Drive AB during the spring of 2005. Among the companies range of products there exists some concern regarding the amount of clamping force and friction on bolted joints caused by the assembly torque.The aim of this project has been to determine if there is a simple way in which to identify and then practically apply testing methods for clamping force and friction through utilization of existing testing equipment.Three separate methods of clamping force and friction determination have been tested in rear drive unit, RDU, at a 30 Nm assembly torque. A fourth and final method, screw elongation with ultrasound, has been used as reference. The methods are:?Torque-Tension test.?Screw elongation with micrometer.?Joint stiffness test.?Screw elongation with ultra sound for reference.The results from tests can be viewed in table below.MethodTorque-TensionMicrometerCs=318 kN/mm Assembled with torque wrenchMicrometerCs=318 kN/mm Assembled on lineUltra-soundCS=311 kN/mm Ultra- soundCS=318 kN/mm Joint stiffnessTheoreticalClamping force-21,8 kN17,6 kN17,3 kN17,6 kN17,1 kN17,3 kNFriction-0,110,1470,1530,1470,1520,149.

Background: In the martial art of Muay Thai, techniques are used with hands, elbows, knees and kicks. The contestants are divided into different weight classes and experience levels. The Swedish martial arts association has decided that techniques with elbow are not allowed in B-class. Why is it so?Objective: The aim of this study was to investigate whether the martial arts delegation decision to restrict techniques with elbows to the head in the B-class is justified.

In this study, the pre-tension force in an insert screw connection are examined in order to establish a greater understanding of the system and to facilitate the process of making new metal cutting tools. Certain especially significant design variables such as the offset, the length of the contact thread and the shank length above the threaded hole, are selected to be closely examined. A comparison of the influence on the pre-tension force between threaded holes made with a worn, versus new, threading tool is also involved in the experiment. The study is limited to handling the screw sizes M2,5 and M3,5. The results show that a regression model, with good approximation, can be fitted to the measured values.

Syftet med uppsatsen är att jämföra hur grunderna för ansvarsfrihet från skadestånd vid fullgörelsehinder är uppbyggda i olika normsystem för att utifrån en komparativ analys komma fram till vilket system som är bäst tillämpbart i en situation liknande den i scenariot med den försenade vaccinleveransen som jag beskrivit i inledningen till uppsatsen.De regler jag valt att studera för en komparativ jämförelse är kontrollansvaret i den svenska köplagen 27 § och CISG art. 79, modellagarna PECL och Unidroit Principles regler om force majeure och hardship, standardklausulerna i ICC 2003 Force Majeure and Hardship Clauses samt den engelska läran om frustration. Att jag valt att studera teorin om hardship beror på att teorin är starkt sammankopplad till reglerna om force majeure och kontrollansvar. Jag har valt PECL och UNIDROIT som exempel på hur modellagar kan vara upplagda. Fler modellagar och principer finns.

This thesis provides a comparison of the old Planning and Building act (PBA) from 1987 with the new PBA, which entered into force in May 2011. The essay consists of a descriptive part that presents the regulation of both laws. The new PBA consists of several differences compared to previous regulation. This thesis will, however, primarily be centred around the regulation regarding building permit appeals and the possibility of building permit, to gain legal force.In the old PBL, there were no regulations that result in a building permit decision could be made effective. Instead, a building permit could, long after the decision had been made, be over-challenged.

This thesis was performed at Vendig AB which is a company that develops and sells products such as belt scrapers for conveyor. The thesis is divided into two parts, one part where it´s investigated which tension force is required to tighten Vendig AB´s scraper Hampus against the belt in a correct way. The second part is called mechanical design and here a new and more compact tension device is developed.Field studies has been conducted at a couple of Vendig AB´s costumers to get a knowledge base about how Vendig AB´s products are used, how they function and the environment they operate in. During one of the field studies the force between the scraper and the belt was measured. The result from the measurements, together with a report from LKAB [1], were evaluated and summarized in a table.

The thesis is an examination of the methods that are appropriate and long-term choice to obtain clamping force and secure screw joints in production. The employer, Scania CV AB, transmission manufactures axle gears to all trucks produced in Södertälje. One of the most common assembly elements is screw joints, where the clamping force is essential to achieve a secure joint. Current methods to secure the joint is due much of the friction effect and is an indirect method to measure the clamping force. The clampforce accuracy becomes more widely with torque angle control.

This study draws from Zygmunt Bauman´s theory that a governmental policy of values can reduce the personal responsibility and moral choices for employees, to focus only on maintaining the government?s internal rules and regulations. The apparent risk with this type of moral attenuation is that the employee is deprived of the possibility to react morally on conduct of the government?s external misuse of power. In this study, this theory is connected to the Swedish Armed Forces? policy of values, as these values do not include a critical standpoint for officers and soldiers.

Heavy duty vehicles often have problems with traction during the winter periods. For vehicles that can lift tag axles it is possible to increase the normal force on the driven axle by lifting one or more tag axles, this will then increase the propulsive force of friction. This however increases wear on both road and vehicle. A possibility to reduce the wear while achieving nearly equivalent traction compared to lifted tag axles is to allow the vehicle to regulate the normal force by lowering the pressure in the air suspension associated with the tag axles or by the lifting of these axles. The vehicle would then by itself be able to set just the right amount of normal force on the drive wheels to avoid unnecessarily high normal forces while maintaining sufficient traction.The purpose of the report is to find out which parameters affect heavy duty vehicles when driving on slippery slopes and how traction can be improved.

What happens when employees within the police-force make mistakes in their line of duty? This essay set out to investigate the relationship between labour law sanctions and the criminal law punishments for wrongful acts for government employees. This relationship is also set in the perspective of how acts or statements of xenophobia are handled within the Swedish police-force. Further, the essay aims to examine the principle of ne bis in idem in relation to labour law sanctions and criminal law punishment for wrongful acts, and if these two should be considered in line with this principle. Regarding the relationship between labour law sanctions and criminal law punishment for government employees, the determination for which system to use in any given situation is not fully stipulated.

This report describes the tactics used by the Swedish Air Force rescue services against crashed military aeroplanes and helicopters. The aim of the report is to study and analyze the tactics used by the different Air Force bases, standards, regulations and equipment. The report also discusses the different work environment problems and hazards around military ARFF. Much of the information gathered for the report comes from interviews with personnel working in and with the military rescue services. The overall conclusion is that the basic conditions for a good ARFF tactic are there, but a lot needs to be improved and optimized..

By understanding which factors that affect individuals´ will to share knowledge with others within an organization, companies can successfully develop a knowledge-based culture by influencing individuals´ attitudes and behaviour concerning knowledge sharing. Several researchers claim that intrinsic motivational factors can consistently facilitate knowledge sharing between individuals within an organization. Other researchers also assert that extrinsic motivational factors, such as reward systems, might affect individuals? motivation to share knowledge. However, extrinsic motivational factors´ impact on knowledge sharing is a relatively unexplored field and more empirical studies are sought after.