This master thesis is a result of the work carried out for Research Electronics at Siljansnäs. The company develops customized electronical systems. Because of the rapidly increasing interest in colour displays there has been a desire within the company to represent information from sensors and electrical systems in a more advanced way.Due to the mentioned reason above we were given the assignment to solve how a colour display using the STN technique works. The technique is used by small displays, the size of QVGA. Our ambition of this diploma work is to develop a fully functionally test prototype to evaluate the LCD (Liquid Crystal Display) and the LCD controller.

The farm management system controlled traffic farming (CTF) aims to reduce soil compaction by restricting the field traffic from agricultural machinery to permanent traffic lanes. Literature and empirical findings show that soil compaction and field traffic from heavy machinery may affect crop growth negatively, reducing crop yields. If grass-clover leys are subject to heavy field traffic the botanic composition might be altered, providing a lower clover content in the forage. Clover as a silage feed is rich in protein providing good conditions for high yielding dairy cows. Grass-clover silage production is generally associated with intensive field traffic.

Firewalls protect network traffic and decide witch traffic to send further and witch traffic will be blocked. All this depends on the rules in the firewall. The firewall is installed between the internal network and the Internet. It is difficult to find a firewall that can protect us against different threats. Firewalls have both advantages and disadvantages and all this make them vulnerable.

Controllerrollen har sitt ursprung i USA där den verkade i de amerikanska järnvägsbolagen under 1800-talet . Termen kom sedan till Sverige runt 1970-talet då intresset för en controller ökade i Europa. Behovet av controllerfunktionen har ökat bland annat beroende på en ökad decentralisering, som medför ett behov av exempelvis information kring företagets ekonomi till flera nivåer.I och med att omvärlden förändras så måste även företagen förändras. För att kunna behålla sin konkurrenskraft har ekonomistyrningen samt controllerrollen hamnat mer i fokus. Controllerns arbetsuppgifter har gått från att enbart vara inriktad mot bokföring till att ha en mer verksam roll i ledningsgruppen. När det anses otydligt vad en controller egentligen ska arbeta med blir det svårare för företagen att själva förstår motivet till varför de tillsätter en controller. Detta är viktigt för att de ska få den controllerroll de söker.

Computational techniques have transformed the journalistic approach. Journalists now have the opportunity to integrate user-statistics from the news website with their work. Singer (2011) argues that journalists seem particularly afraid of items, which they perceive as trivial or otherwise unsavory, will prove popular - potentially creating management pressures to produce more of those stories. She describes this practice as ??traffic whoring??.

In this master thesis a robot arm belonging to an automatic milking machine from DeLaval is investigated. The robot arm is controlled by a pneumatic cylinder and a valve. The goal of the master thesis is to investigate instability problems and to find out if it is possible to solve them by using gain scheduling. Gain scheduling is a type of controller where the parameters of the controller are changed during operation, for example depending on the working point. First a nonlinear mathematical model of the system was made.

Stockholm city has recently raised its ambitions for bicycle traffic, the goal is to achieve a larger andsafer bicycle traffic. But cyclists are more vulnerable on the roads than other vehicle users because of the lack of protection. This means that a large proportion of road safety for cyclists is based on the design of the traffic environment. Since most serious bicycle accidents are those that occur in conflict with motor vehicles, and the majority of these accidents occur at intersections, these areas are of great importance forcyclist?s safety.The  purpose  of  this  paper  is  to  highlight  bicycle  accidents  at  intersections  and  to  suggest improvements  in three accident-prone junctions  in Stockholm.  This is  achieved  by  the study of accident statistics, literature and finally three case studies.The literature study focused on cyclists, traffic safety and traffic safety measures.

Stockholm city has recently raised its ambitions for bicycle traffic, the goal is to achieve a larger andsafer bicycle traffic. But cyclists are more vulnerable on the roads than other vehicle users because of the lack of protection. This means that a large proportion of road safety for cyclists is based on the design of the traffic environment. Since most serious bicycle accidents are those that occur in conflict with motor vehicles, and the majority of these accidents occur at intersections, these areas are of great importance forcyclist?s safety.The  purpose  of  this  paper  is  to  highlight  bicycle  accidents  at  intersections  and  to  suggest improvements  in three accident-prone junctions  in Stockholm.  This is  achieved  by  the study of accident statistics, literature and finally three case studies.The literature study focused on cyclists, traffic safety and traffic safety measures.

Automatic milking systems (AMS) provide the opportunity for less manual labour and an increased milking frequency. But in order to reach an optimal milking frequency a well-functioning cow traffic is crucial. There are many factors affecting cow traffic but one factor that has not been studied thoroughly yet is the effect of different light intensities during the night, 22.00 h to 05.00 h. Therefore the aim of this study was to determine the effect of different light intensities during the night on number of selection gate passages (GP), milking frequency and milk yield. The study was conducted as a Latin square were three light intensities were applied: LOW (11 ± 3 lux), INT (33 ± 1 lux) and HIGH (74 ± 6 lux), in three different herds.

The idea to develop  a platform for a PID-controller came from the need to control the temperature in  an espresso machine in a more exact way than a thermostat could perform. In discussions with Syntronic AB the idea developed into PID-control for industrial use. Syntronic AB suggested that the platform should be based on a commercially available processor module to shorten the development time. The suggestion included the use of the microcomputer Raspberry Pi, which supports USB, HDMI, memory card and Ethernet.The work began with establishing a schedule for the 10 weeks of the projects duration, and after that a system specification listing all functions, implementation and limitations was made. When the foundation of the system specification was done, a preliminary system design took shape.Because of the Raspberry Pi´s lack of Analog-to-Digital converter, a circuit board containing Wheatstone bridges, differential amplifiers and a two channel Analog-to-Digital converter was fabricated.

The purpose of this essay is to study and compare the air traffic with the train traffic between Gothenburg ? Stockholm. The study is based on three different perspectives: travelling time, travelling cost and the environmental effects. With those three factors included in the study, it will be more useful to determine if the unnecessary travel exist.This essay is based on quantitative information which has been gathered from the booking system of the train- and airline company?s websites.

Two of the main approach roads into the city of Enköping are Salavägen and Stockholmsvägen. They are connected to each other through the street Bangårdsgatan in the roundabout Salatullen and crossing Fannakorset, respectively. These crossings are from time to time heavily loaded, which is why the municipality plan for a new street in parallel to Bangårdsgatan. The traffic will then be spread out and is thereby reducing the density. The new street is actually an extension of the existing Mästergatan, a side street to Salavägen, to the east and connecting it to Stockholmsvägen or a street nearby.The purpose of this Master thesis is to show how the new street can be drawn in order to discharge the traffic in the area between the roundabout Salatullen and the crossing Fannakorset.

In Sweden the most common type of road traffic accidents involving passenger cars are single accidents (where only one vehicle is involved). The aim of this thesis is to analyse how these accidents occur, and present recommendations on how to reduce the number of deaths. Data has been collected from the Swedish Transport Administration?s in-depth studies of fatal accidents. Road traffic accidents with fatal outcome that happened on public roads during the years 2007 to 2009 have been studied.

Tycho Hedéns Väg in Uppsala has evolved from being a through fare passage and highwayto the oversized road frame running through the city it is today. At the present time, dueto the relocation of the E4 highway east of Uppsala, Tycho Hedéns road creates a barrierbetween the north eastern area of Uppsala and the remaining parts of the city centre. Theroad is designed to endure heavy traffic and high speed limits, generating a surrounding urbanarea were inhabitants are complied to follow the standards set for a high traffic-accessibleenvironment. Furthermore, the heavy traffic has led to the turning of both urban roadsidesaway from the actual road. The aim of this project and proposal is to show the possibilities ofhow the innate features of Tycho Hedéns road can be used more advantageously to mend thecity area of Uppsala.

Performance of an intersection affects the total travel time in a traffic network. An intersection with good performance can easily be described by its contribution to lower travel time than in a comparable intersection. The travel time is of importance in the cost calculations when a specific intersection is to be chosen and designed. It is important to be able to make correct and precise performance calculations so that the cost calculations will not be incorrect. For that purpose the software Capcal, which is a traffic model for intersection analysis on performance, is used in Sweden.