To support uniform and fair assessment of Swedish students? English language competences, mandatory National tests are provided both for secondary and upper secondary education. The current thesis may be seen as a contribution to the further development and validation of these tests, with regard to the likely introduction of computerized testing methods. The aim is to gain further knowledge from current research in the field, to study and elucidate international experiences of implementation, and to gather and analyze feedback from students and teachers. Based on my findings, some tentative conclusions will be drawn, and recommendations made concerning future developments.

In studies of serum, in the early 1930s, from patients with pneumonia, a factor was found. It could agglutinate certain pneumococcal species. This factor, which later became known as C-reactive protein (CRP), increased sharply during the early and middle stages of the disease. CRP was identified as an acute phase protein and found especially in bacterial infections. CRP is synthesized in the liver by stimulation of interleukin 6 (IL-6), which is produced by the monocytes, and consists of five non-covalently bound subunits.The aim of this study was to compare two different analytical instruments (Vitros 5.1 FS Ortho-Clinical Diagnostics and QuikRead CRP Orion Diagnostica) for CRP analysis.

This report examines the relationship between usability and subjective judgmentsabout aesthetic and emotional aspects of users of a web production. Through thedevelopment of two prototypes that reflects different aspects of usability and subjectiveassessments examined the consequences of a differentiation of the concepts andUsability and Likeability. Thereafter, an evaluation of the two prototypes are madethrough user testing. Finally, the results of the evaluation is presented and are relatedto the concepts of usability and likeability. .

This report describes a project carried out in cooperation with Klippan Safety AB. The purpose of this project has been to develop a product that facilitates the living area in a truck cabin for the customers. To be able to develop, in a structured way, that kind of product, the project has been based on different product development theories. The project contained of following parts: marketing research, product generation, product evaluation and prototyping. After information from the marketing research and discussions with the company, the decision was made that the task was going to consist an improvement of the existing product referred to as 'the comfort module'.

Under denna studie så hade författarna ett uppdrag från en uppdragsgivare som var att skapa en ny agil projektmetod åt denna, för att främja deras arbete med ett projekt som de genomför årligen, som heter Jobb Shop. Projektet hade under det senaste genomförandet inte genomförts med hjälp av någon särskild projektmetod. Författarna till denna studie skapade under arbetets gång en specifik agil metod åt uppdragsgivaren som de kan använda under kommande år vid genomförandet av Jobb Shop. Vid sidan av detta så gjorde författarna även en metaanalys av den nya metoden där de studerade hur den nya agila arbetsmetoden, rent teoretiskt, kan främja kreativitet och innovation. Resultatet av studien visade att den teoretiska grunden för ovanstående fråga var god, och de drog slutsatsen att agila metoder, teoretiskt sett, mycket väl kan främja kreativitet och innovation..

During spring 2009 a three meter tall and laughing robot was developed in collaboration between Royal Institute of Technology and Royal University College of Fine Arts. The robots function and esthetics is based on an existing toy robot called Elmo. Elmo is 30 cm tall but now the goal was to make it 1000 times bigger in order to present it on the spring exhibition of Royal University College of Fine Arts. Due to only four months of developing and building time a demand of fast determination and good planning was required. In order to make a good structure for the project it is divided into five phases: Analysis of Elmo, planning, concept development, detail construction and finally product development and testing.In the first phase valuable knowledge is obtained according to the movements and geometry of Elmo.

AbstractOur bachelor degree thesis was carried out in collaboration with Ivar Petterssons Järnmanufaktur AB in Smålandsstenar. We were asked to replace their wedge housing, used to fasten the wires to the power lines, with a similar structure in a plastic material. The idea for this project started with Ivar Petterssons Järnmanufaktur AB having problems with the casting quality that forced them to perform expensive tests on each of the wedge houses to ensure the quality. They are currently produced in China which is also a major drawback because it requires expensive long delivery times.The method we used is Fredy Olsson's Princip- and Primärkonstuktion (1995). We have consistently been in the project on so-called "broad front", which means that you create several sketches, ideas and changes in parallel, and then evaluates all.

The work covered in this report includes a literature study of the diesel dual fuel technology(hereinafter referred to as DDF). The literature study covers earlier work that has been doneregarding the use of compressed natural gas (CNG) and diesel in a DDF system. Moreover a onecylinder research diesel engine was fitted with a CNG fuel system for experimental testing. Theinstallation of the engine and the test cell is described. Results from the tests are presentedcovering emissions, heat release and pressure traces from the DDF-concept.During the literature study it was found that most research was related to heavy duty dieselengines.

Introduction: The current research shows that cannabis use is increasing, while alcohol use is decreasing in many countries. The reason for the increase is considered to be the increased availability and that adolescents attitudes towards cannabis has become more liberal. Aim: This qualitative study aimed to examine adolescents attitudes and knowledge about cannabis. Methods: Data has been collected from focus group interviews with adolescents aged 15-18 years, in a west Swedish municipality. Participants were recruited through visits to secondary and upper secondary schools.

The project, Glowtest Fixture, has been carried out to and in collaboration with MSA SordinLtd. MSA Sordin Ltd produces and sells ear protector and is at present a supplier on theworld market. Glowtest Fixture is a product for glow testing off detailed components in oneear protector. MSA Sordin Ltd sends today away your products for testing what is anexpensive aspect in their development. The project's aim is to take forward a test equipmentthat copes with those high nonplussed requirements and wishes that are required for anapproved physical execution.Glowtest Fixture is a physical equipment that comes used stem glow physical off all detailedcomponents in one ear protector.

This report presents a master thesis project performed at Elekta AB during the fall of 2013 and early 2014. Elekta is a medical technology company and their main product in the Stockholm office is a gamma knife used for radiosurgery. The gamma knife contains a cluster of a dozen motor servos and motors used for adjusting the patient and the radiation sources over a CAN bus. A self-developed hardware-in-loop simulator running on a PC with LabVIEW is currently being used for integration level testing of the control system of the gamma knife. The simulator has some problems with it not running in real-time and having other performance issues.

Scrum är ett agilt ramverk för projekthantering, tänkt att effektivisera systemutvecklingsarbete och maximera affärsnyttan, bland annat genom användadet av roller, så som en icke detaljstyrande projektledare (ScrumMaster), en engagerad produktägare (Product Owner), och en självständig systemutvecklargrupp med ett brett spektrum av färdigheter (Scrum Team). I följande uppsats ämnar vi att undersöka hur ett Scrum Team och deras arbete blir påverkade av att vara delaktiga i en Scrumimplementering. För att åstadkomma detta har vi genomfört en fallstudie med kvalitativa intervjuer, direktobservationer i arbetsmiljö samt insamlande av dokument. Förutom dessa källor har vi genomfört en expertintervju med en av grundarna bakom Scrum, Jeff Sutherland. Våra fynd tyder på att förändringarna inkluderar en rad faktorer, så som samarbete, transparens och kommunikation, men framför allt en ökning i självbestämmande och självständighet, samt en ökning av kollektivt ansvarstagande.

Starting out as a minor form of amusement, the game industry has become one of the most lucrative andsuccessful in the entertainment business competing against giants such as television, movies and music.As the internal competition within the developer community grows companies work hard at discoveringnew ways to attract and keep customers. By having a playcentric approach focusing on user experiencethey hope to achieve that goal. This thesis describes the process of designing a game with focus on theplayer. We apply the concept of flow on game development and investigate through research throughdesign if we are able to create a game that keeps the player in flow.Play tests showed several elements such as control issues and too difficult challenges early in the game,affecting the possibility for players to experience flow while playing. These negative factors came to becalled flowleakers.

Due to the globalization today the competition in the market has in- creased and it requires flexibility and produce according to customer demand. In order to reduce the cost of wages industrial companies are now considering moving the manufacturing to low-cost countries. To keep up with the competition in the market without moving the manu- facturing abroad, Lean Automation was developed. The concept of Lean Automation is to reduce the perceived complexity with automa- tion and make automation available for new users and in new applica- tions.Haldex Brake Products are situated in Sweden and want to maintain the manufacturing of the automatic brake adjusters in the country. It is a product well-known and highly exposed to the competition in the mar- ket.

This report presents a master thesis project performed at Elekta AB during the fall of 2013 and early 2014. Elekta is a medical technology company and their main product in the Stockholm office is a gamma knife used for radiosurgery. The gamma knife contains a cluster of a dozen motor servos and motors used for adjusting the patient and the radiation sources over a CAN bus. A self-developed hardware-in-loop simulator running on a PC with LabVIEW is currently being used for integration level testing of the control system of the gamma knife. The simulator has some problems with it not running in real-time and having other performance issues.