A study was carried in conjunction with the Orthodontic department at Halmstad General Hospital in Sweden to investigate the possibility of reducing cost and manufacture time of dental implant drill guides. The current system involves sending a digital image in STL format to the Materialise factory in Belgium where information of the position of dental implants is translated onto a moulded mouthpiece. Drill guides are placed in the mouth piece which is then returned to the surgeon. The mouthpiece complete with drill guides is then placed in the patients mouth and used as a guide for the implant drill holes. The cost of 10000 sek and a turnaround time of 2 weeks gave rise to the need for a faster and cheaper solution.

This study focuses on the development of methods for sexual determination of human skeletal remains, mainly between the years 1981 to 2007. By comparing an older analysis from 1983 (Persson and Persson) with my own on the same material, a difference of 40% was shown, which indicates that the methods has changed through time, and that these should not be used for newer conclusions about a population if the method is not throughoutly described.The main cause of the difference was identified as a change in the reliability of the sexual indicators, rather than a total change of method. Any general tendencies did not show, it is however considered that the pelvic bones are able to make a better conformity between the analyses as opposed to using the cranium..

The purpose of this study is to contribute to our knowledge about what methods? teachers say they use in the work with pupils? early reading acquisition, and how they evaluate the pupils´ reading development. I also like to find out what educational interventions teachers believe that pupils with reading difficulties need, and how they say they work to meet the needs of these pupils. The project is based on the following questions: What methods do teachers say they use in the work with pupils early reading acquisition? What extra resources do teachers consider that pupils with reading difficulties need? How do teachers evaluate children's reading development? In order to answer my questions, I've done qualitative interviews with three teachers, at two schools, in two medium-sized municipalities.

Målet med denna studie är att utveckla en adapterprototyp mot en öppen energiplattform och dokumentera utvecklingsprocessen. Fokus ligger på att integrera Philips Hue, ett system för styra trådlösa lampor mot plattformen Elis (Mobile services for energy e ciency in existing buildings). Inom en begränsad tidsram så ska vi sätta oss in i två främmande system till en sådan grad att vi kan skapa kommunikationen mellan dem. Inledningsvis krävs det att vi läser dokumentation och att vi jobbar fram en arbetsplan. Vidare kommer vi lösa den adaption som krävs för att värden mellan det två systemen överensstämmer och fungerar.

The concepts of environmental scanning and Business Intelligence have gained increased interest over the last years in a number of different organisational contexts. The research in this field has mainly been dealing with methods and issues regarding organisation but the aim of environmental scanning, the forming of new perspectives, has been largely ignored. The purpose of this thesis is to study how Swedish joint-stock banks put environmental scanning and Business Intelligence into practice. First a literature study is made to create a background and to explain the different conceptions. Then I describe the different functions of the different services in Swedish joint-stock banks.

This report reflects an examination work performed for Getrag All Wheel Drive AB during the spring of 2005. Among the companies range of products there exists some concern regarding the amount of clamping force and friction on bolted joints caused by the assembly torque.The aim of this project has been to determine if there is a simple way in which to identify and then practically apply testing methods for clamping force and friction through utilization of existing testing equipment.Three separate methods of clamping force and friction determination have been tested in rear drive unit, RDU, at a 30 Nm assembly torque. A fourth and final method, screw elongation with ultrasound, has been used as reference. The methods are:?Torque-Tension test.?Screw elongation with micrometer.?Joint stiffness test.?Screw elongation with ultra sound for reference.The results from tests can be viewed in table below.MethodTorque-TensionMicrometerCs=318 kN/mm Assembled with torque wrenchMicrometerCs=318 kN/mm Assembled on lineUltra-soundCS=311 kN/mm Ultra- soundCS=318 kN/mm Joint stiffnessTheoreticalClamping force-21,8 kN17,6 kN17,3 kN17,6 kN17,1 kN17,3 kNFriction-0,110,1470,1530,1470,1520,149.

To support uniform and fair assessment of Swedish students? English language competences, mandatory National tests are provided both for secondary and upper secondary education. The current thesis may be seen as a contribution to the further development and validation of these tests, with regard to the likely introduction of computerized testing methods. The aim is to gain further knowledge from current research in the field, to study and elucidate international experiences of implementation, and to gather and analyze feedback from students and teachers. Based on my findings, some tentative conclusions will be drawn, and recommendations made concerning future developments.

The interest in small-scale electricity in Sweden has increased strongly in recent years. The interest is noticeable both among politicians to increase the share of renewables in the energy mix, and among electricity consumers to partially replace purchased electricity with self-produced. This has resulted in a significant increase of electricity production in low voltage grids in recent years, and the trend appears to continue in the coming years. The majority of the new production plants are solar cells, followed by wind turbines, and it is also in these the greatest efforts are made in this paper.Distributed generation is often seen as something positive since it will contribute to reduced transmission losses and reduced voltage drop in the networks, and that it increases the share of electricity from renewable sources. In cases where the grids are not strong enough, or in other ways not adapted to manage the installed production, power quality may be adversely affected.

Background: Evaluation of lameness in horses is traditionally performed by a veterinarian who subjectively evaluates the movements of the horse. Accordingly, lameness diagnosis varies with the veterinarian and circumstances for which the horse is examined. Research within the area has long tried to establish an objective and standardized method for lamenessevaluation in horses. Several methods have been shown to be reliable and are used regularly within research, for example measurement of forces between the hoof and ground, and measurement of movements with high speed cameras or accelerometers. However these methods require considerable preparation, standardization, and expensive equipment as well as produce large amounts of data that are incomprehensible for the clinician.

This thesis has been focused around the Diels Alder reaction with the goal to design an enzyme catalyzed reaction pathway. To achieve this goal computer aided enzyme design was utilized. Common traditional methods of computational chemistry (B3LYP, MP2) do not do well when calculating reaction barriers or even reaction energies for the Diels Alder reaction. New calcu- lation methods were developed and tested. This was the focus of the first part of the thesis, by choosing a small system, extensive and heavy calculations could be done with CBS-QB3.

This report discusses the development of an autonomous system that can travel a distance of atleast 30 meters on two wheels. The system, the robot, detects black lines and stops if one isdetected. A remote control can be used to start and stop the robot. The robot is constructed ofmainly steel with smaller, more detailed, parts in plastic. A significant amout of time has beenused to enable the robot to balance on its own.

This thesis is about adware, which is very popular today. The adwares are used to, among other things, down- and upload files from other users on the Internet. One thing that most users of such programs are not aware of is that many of the adwares contain spyware. These spywares install themselves simultaneously with the adwares. Two of the spyware features is to generate pop-ups in the web browser and to direct advertisment from the users web habits.

According to the curriculum for the Swedish preschool system, children?s development and learning should be documented and analyzed in order to evaluate and develop the preschool quality. Social criticism is directed to some of the methods of documentation for assessing the children´s individual knowledge development. The purpose of this study was to examine how, what and why some teachers use documentation in preschool. I wanted to examine which methods preschool teachers used when they documented the children and what they focused on.

The educational directive for the school subject textile handicraft (slöjd) claim, that the pupils should have knowledge of handicraft traditions from historical and present perspective. Teachers in handicraft, teaching in schools for the first nine years of a child education forwards a cultural heritage. The purpose of this essay is to find out what the teachers opinion is about what constitute the Swedish textile cultural heritage. How the teachers relate to it and how they use it, then teaching. The essay is based on a qualitative method and consists of interviews with teachers.

Today?s wind power plants are only compensated for their reactive power consumption at no-load. As the wind power plants grow bigger the amount of reactive power they need also increases. This is no longer a problem that can be ignored, especially as the net owners are beginning to charge the reactive power they transport.In this thesis a couple of different methods of compensation and their prices will be discussed and evaluated. Problems, such as self-excitation, that can occur if one fully compensates the wind power plant will also be brought to surface.