During springterm 2010 Erik Persson and Magnus Hansson performed their ThesisWork with DIAB Laholm, in Hallands County for University of Halmstad.The project has been a product development project without exterior customers. Thusit had a great emphasis on functionality and less emphasis on marketing and such.This reflects the ambition to develop machinery to be used within the productionfacilities of DIAB Laholm, not to be sold to exterior customers.Main objective has been to create machinery which enables the production ofrotational symmetric work pieces within a NC-milling machine with 5 axles. Thework pieces milled will be made of DIAB?s material Divyncell with varyingdensities.The project has followed Fredy Olssons method involving Principal ? Primary ?Manufacturing constructions. However a complete manufacturing construction hasnot been made since DIAB just wanted a good Primary construction which will serveas a base for finishing touches at DIAB.By the end of the project material including calculations has been sent to DIAB andthey will finish the work and manufacture the machine if they find economic viabilityin this.The work method has been suited for this by several reasons, it was created withthese projects in mind and it?s also the method most familiar to us..

From January 1st 2011 the use of Eurocode will be mandatory for all constructionprojects. Eurocode is the common European set of struc-tural design codes which willreplace BKR (Boverkets Kon-struktionsregler). BKR is the Swedish set of structuraldesign codes that was used up until December 31 2010. For consulting firms this willcre-ate a need for them to invest in the standards and in education for thecoworkers. This will involve both time and costs for the company.The purpose and aim of this master thesis is the development of compute examplesand calculations aid by dimensioning with Euro-code.

This thesis is using the theory of participatory democracy to show how one can work to increase the participation in the society, between elections as well as during elections. For a couple of years now many traditional democratic countries have been struggling with low voting rates. Hence this, I find it interesting to study what has been done to cope with this problem. The government in Sweden had a project working on how to make more people involved in the democratic process, especially people that to a lesser extent participate in this process. In this thesis two projects will be studied, Möllevångsgruppen and Unga väljer Miljö i Malmö.

This report gives an overview of applications of the Greenroads rating system whichin turn is an environmental review system for roads. The focus of this report isapplications during the construction phase, ie on solutions which adhere to theentrepreneur's area of responsibility as opposed to the designer's. The study was undertaken in cooperation with Skanska (a global contractor andFortune 500 company) which provided a project suitable for an exemplatory study ofGreenroads. Please note that the project in particular was not specifically designedwith Greenroads in mind. Therefore and because of that the site provided anexcellent opportunity to study effects of application contra non-application. The approach of this study was to first review the system, thereafter to performinterviews with key personel at the site in different roles as to receive different viewsof selected points of application. Selected possibilities of application are cathegorizedand presented with comments and suggestions for adoption. Lastly Greenroads is briefly compared to the rating system which today is the mostwidely used by Skanska, LEED.

During springterm 2010 Erik Persson and Magnus Hansson performed their ThesisWork with DIAB Laholm, in Hallands County for University of Halmstad.The project has been a product development project without exterior customers. Thusit had a great emphasis on functionality and less emphasis on marketing and such.This reflects the ambition to develop machinery to be used within the productionfacilities of DIAB Laholm, not to be sold to exterior customers.Main objective has been to create machinery which enables the production ofrotational symmetric work pieces within a NC-milling machine with 5 axles. Thework pieces milled will be made of DIAB?s material Divyncell with varyingdensities.The project has followed Fredy Olssons method involving Principal ? Primary ?Manufacturing constructions. However a complete manufacturing construction hasnot been made since DIAB just wanted a good Primary construction which will serveas a base for finishing touches at DIAB.By the end of the project material including calculations has been sent to DIAB andthey will finish the work and manufacture the machine if they find economic viabilityin this.The work method has been suited for this by several reasons, it was created withthese projects in mind and it?s also the method most familiar to us..

Poorly maintained forges are a common sight in the province of Gästrikland. Because of their changed appearance, possible move from the origin location and poor items related knowledge they will rarely qualify for the range of funds available through Länsstyrelsen. Therefore this study deals with the problems associated with the forges in southern Gästrikland, i.e. Hedesunda and Österfärnebo parishes.The aim of the study is to increase the items related knowledge of forges and perhaps form the basis for restoration projects in the area. Eleven forges have been examined and the changes they have undergone have been highlighted.A forge was erected on the farm and was used for the households needs such as producing and repairing tools.

Real options analysis is a method for assigning value to flexibility in decisions, coming from uncertainty in future outcomes. This thesis ascertains to what degree this method is superior to traditional net present value analysis, with regards to ease of implementation in relation to the benefits from being able to measure the total value. Real options analysis is evaluated with a case study of the Swedish online gambling market, and conducted with the binomial framework of Copeland and Antikarov (2003). The authors find the sensible use of real options dependant on the specific situation to which it is applied, i.e. a certain degree of future uncertainty and managerial flexibility is necessary for justification of the increased workload.

The company Somas, Säffle, has assigned Fredrik Kjellin the project of finding out how ?KVTF DN250?, one of their own valves, reacts on cutting forces under production. They wish to know if and then how much it?s possible to minimize the wall thickness of the valve with neither plastic nor to big elastic deformations caused by processing.The most critical processes have been identified as rough lathing. The study has shown that the marginal for a wall thickness of two millimeters, to fall short of the yield stress in the most critical process, is good.

The aim of the thesis is to investigate to what extent the pedagogy process has been affected by the close collaboration between librarians and teachers when it comes to education on the information search process. The thesis shows that the librarian is seen as an acting intermediate for information, and is regarded as a part of the learning process. The issues covered comprise of how students, teachers and librarians perceive that the students becomes information literate, how they perceive that the subject fields are covered, and how information has been transmitted, and how all this has been affected by the fact that the librarian is actually less available in person. Also, the following questions are discussed; how do librarians, teachers and students interact through the homepages of the course and "the landscape of studying"? And in what respect have the old library halls changed into that, which is available 24 hours a day, with different kinds of meeting opportunities where the search of information has been integrated with group projects? The foundation of this study is built on an evaluation of a project comprising of virtual study environment at the University of Linköping.

The purpose of this Master's thesis is to examine the decision-process concerning public art in Borås municipality. My questions have been from where the initiatives come, who the decision-makers are, how the decisions are taken and which questions are discussed. I have examined this through partly interviews with the members of the deciding organ in Borås municipality, partly through literary studies. I have also analysed texts such as debates and protocols from the Swedish parliament. I have also been present at two of the committees meetings.

By using contemorary work-theory this thesis aim to show how Yarden. En bera?ttelse, puts into play the circumstances of precarian work, circumstances that have gender political as well as identity political overtones. It tries to show how the idea of ?class-jouney? is used as a conciliatory element.

Thavenius (2009:23-122) and Dahl (1999:49-82) explains that literary education in school has gone from, in the 1800s, barely existed on receiving the fairly central location it has today. Fredriksson (2010:2-3) points out that there are several threats to the ancient writers and writings in danger of being forgotten. The purpose with this essay was to examine how to work with literary history in school, and whether and how to work with regional literature history. To fulfill the purpose of this paper three high school teacher in Swedish were interviewed.The survey shows that respondents working in various ways with the history of literature, either in the eras, themes or projects. The perception of what literature and the authors to be affected varies between respondents, particularly the perception of the work about authors from Värmland.

As technology have continued to develop over the latest decades and become more advanced the pressure on the general citizens understanding of technology becomes a essential part to live in our society today. The transition have affected our society in great ways and have made a great impact on different groups, one of them being the elderly population in our society. The purpose of this study is to examine how the fast technological development in the latest decades have affected the elderly in our society. This from their perspective by gathering empirical data through semi-structured interviews with elderly people involved in the Agnes-project, a research project focused on improving the general quality of life for older people and increase their knowledge about technology. The study has shown that after the older peoples time involved in the Agnes-project their quality of life had improved in different areas. Areas such as increased cognitive activity, increased interest in new technology and an improvement in their communication with friends and family.

This thesis investigates the 200 year old phenomena of savings banks and if they increase the economic growth (GDP) in the local region they act in. That is being done by testing three hypotheses; the savings banks increase the attractiveness of the region they act in; the savings banks increase the entrepreneurship in the region they act in; and the savings banks increase the economic growth in region they act in. This quantitative cross-sectional study with data from the year 2010, finds that the savings banks increase the attractiveness of the local region, most likely through the efforts and financials they put into different local projects. A positive result is also found for increased entrepreneurship in the regions that have a local savings bank. The result is explained by the savings banks relationship lending, which increase the likeliness for a company to get the credit they need to start and develop.

This study is about the work of including immigrants to the Swedish society. The reason that we chose Landskrona community is that it is a town with a high population of immigrants. The purpose of this work has been to examine how projectleaders reflect about the work of integration in Landskrona and their point of view regarding the term integration. Our questions were: what is the projectleaders view on the term integration, how does the projectleaders reflect about the work of integration in Landskrona, how would the projectleaders like the work of integration to be, how does the projecleaders reflect about the future work of integration in Landskrona.We used a qualitative method to do this study and interviewed six persons who all work in various projects, that are working for including immigrants to the Swedish society.Our main results in our study is various kinds of thoughts and reflections of the work of integration in Landskrona, but there were some things that were more approaching than others. There is a high ambition of integrate immigrants into the Swedish society in Landskrona and the projectleaders had all many reflections of their work.