During springterm 2010 Erik Persson and Magnus Hansson performed their ThesisWork with DIAB Laholm, in Hallands County for University of Halmstad.The project has been a product development project without exterior customers. Thusit had a great emphasis on functionality and less emphasis on marketing and such.This reflects the ambition to develop machinery to be used within the productionfacilities of DIAB Laholm, not to be sold to exterior customers.Main objective has been to create machinery which enables the production ofrotational symmetric work pieces within a NC-milling machine with 5 axles. Thework pieces milled will be made of DIAB?s material Divyncell with varyingdensities.The project has followed Fredy Olssons method involving Principal ? Primary ?Manufacturing constructions. However a complete manufacturing construction hasnot been made since DIAB just wanted a good Primary construction which will serveas a base for finishing touches at DIAB.By the end of the project material including calculations has been sent to DIAB andthey will finish the work and manufacture the machine if they find economic viabilityin this.The work method has been suited for this by several reasons, it was created withthese projects in mind and it?s also the method most familiar to us..

Uppsats för avläggande av filosofie kandidatexamen i Kulturvård, Bygghantverk, 27 hp, 2012.

Our common future involves many important challenges. People and nature need to improve the relationship in order to reach an ecologically sustainable development. In a society where consumption of products steadily increases, the consumer awareness about social and environmental issues connected to the products becomes an importent factor. More and more companies choose to work more actively with these issues and more and more products get labelled by some of the eco labelling organisations. From the cradle to the gate means that a study has been done on a part of a products life cycle.

Recent studies show that manufacturing companies to a larger extent use historical cost accounting in their internal accounts, at the expense of calculated costs. The explanation behind this is claimed to be that firms are subject to careful scrutiny by the stock market. Consequently, top management stresses the need of evaluating all parts of the firm from external accounting. However, lower management levels express a general concern that the incentive to invest in machines will decrease. This master thesis aims to investigate whether or not there is an objective reason behind this concern.

This Master Thesis is a product development project that has been carried out in cooperation withLappset Sweden AB.The purpose has been to develop a group of products suited for parks andtraditional playground locations. The specific target area has been courtyards of newly builtresidential areas. (These pieces of open land resemble glades that can be found in the forest,which in Swedish is called ?gläntan? and has given name to the product family). Therefore thedesign should match contemporary architecture.

Problem: In society of today corporate competence is an important factor for survivor and development. IT is developing rapidly and can not be ignored by companies. Then need for people with IT-competence is conquent increasing. A survey of corporate IT-competence is therefore of interest for companies as well as for local authorities. To determine the IT competence within an organisation, this competence has to be measurable.

Att förstå sambandet mellan miljövariabler och fiskarters förekomst eller abundans är en väsentlig del i att bedriva ekosystembaserat bevarandearbete och ekologiskt hållbart fiske. Tånglaken, Zoarces viviparus, var klassad som nära hotad på rödlis-tan 2010 och på HELCOM Red List of the Baltic Sea 2013. Tånglaken är utbredd över hela Östersjön och används som en bioindikator för föroreningar i havet Att förstå vad som styr tånglakens utbredning är alltså viktigt både ut bevarande syn-punkt och ur miljöövervakningssynpunkt Meningarna går isär angående dennes ha-bitatpreferenser. Med hjälp av data i form av uppmätt djup och videosekvenser från provfisken inom projektet BONUS INSPIRE och data i form av rasterkartor för andra miljövariabler har generalized additive modelling gjorts för tånglakens före-komst i Östersjön. Tre slutgiltiga modeller valdes ut baserat på förklaringsgrad.

NCC ROADS Sweden east is a part of the NCC Corporation. The company mainly produces aggregates, asphalt and concrete. They have taken the environmental issues seriously and been working with that since the middle of the nineties. When manufacturing asphalt large a quantity of fossil energy is needed. The company is now about to make further progresses by manufacturing environmental friendly asphalt (?green asphalt?) with using bio-energy.

The use of earth bricks in Scanian building traditionThe present work is concerned with the manufacturing and use of earth bricks inbuilt heritage in the south Swedish province of Scania. The first part of the studyprovides a thorough description of the traditional use and manufacturing of earthbricks based on relevant literature, archive material as well as interviews withinformants. This forms a basis for the second part of the study in which practicalexperiments on and tests with earth bricks where carried out. This involved themaking of traditional earth bricks of different composition. The new handmadebricks were compared with industrially produced bricks (extrusion bricks) and oldhandmade bricks.

One of the most distinguishing features of contemporary globalisation is production fragmentation, a splitting up of the manufacturing of a good into several different stages. Production fragmentation creates new opportunities through vertical specialization; a country incapable of mastering the entire production process may specialize in the manufacturing of one separate part. The aim of this thesis is to examine to what extent international integration affects a country?s ability to engage in vertical specialization in an industry characterized by production fragmentation. The analysis focuses on the european integration process over the last decade, where countries in eastern Europe with relatively low labour costs have been integrated with more capital abundant western economies.

Problem: In society of today corporate competence is an important factor for survivor and development. IT is developing rapidly and can not be ignored by companies. Then need for people with IT-competence is conquent increasing. A survey of corporate IT-competence is therefore of interest for companies as well as for local authorities. To determine the IT competence within an organisation, this competence has to be measurable.

The project was carried out with SwedSafe AB, engaged in hearing and manufacture of earplugs. Since the company is a world leader in the sale of these products, it is important that they keep a higher level of quality of these products.Production of earplugs is currently a automated manufacturing process that is divided into four conveyor belts and one of the conveyor belts is what will be affected in the project. The belt affected during this process is exposed to various elements such as filling, closing, fermentation and extraction of products. Because the belt gets dirty, degraded products and the work environment is affected. To increase the quality of products and improve the working environment requires an automatic cleaning process, which collects dirt from the belt.The aim of the project is to design a machine that prevents the belt from becoming dirty, preserve molds clean and improve the working environment without disrupting production.

AbstractThis study deals with the tours carried out in the manufacturing sector, at Alfa Laval in Eskilstuna. A large number of visitors, from a variety of backgrounds, go there to see how the manufacturing of separators works. With visitors I refer to the company?s customers, suppliers, students, in- house trainee courses, managers and senior citizens groups.The study examines how these tours can be standardized using spatial design. The result shows the importance of working systematically with visualizing the work as well as the environment for optimizing the visitor's understanding.

VBG Produkter AB is a process-orientated company that develops, manufactures and markets trailer couplings with belonging coupling equipment, protection equipment against skidding and stands for wagon-bridge for heavy vehicles. The company feels that their set-up time in production for couplings is not at an acceptable level. Due to high demands of customer oriented production the intermediate stock level of included products within the assembly of couplings has gradually increased which has resulted in high inventory holding costs. VBG Produkter applies Kanban in their production, therefore it is important to produce exactly the necessary amount and avoid overproduction. The objective of this project is to suggest appropriate solutions so that VBG Produkter is able to reduce their set-up time in assembly of couplings, by identifying internal and external set-up time for the chosen process bushing cell.

The austenitic stainless steel 316L has been compared to duplex stainless steels to be able to highlight a choice of material for manufacturing of spare tanks used for cooling water at nuclear power stations on the Swedish west coast. In this report 316L and the duplex stainless steels 2205, 2304 and LDX 2404 have been compared according to corrosion resistance, strength, manufacturing aspects and prices. The steels arranged by increasing corrosion resistance: 316L < 2304 < LDX 2404 < 2205. The steels arranged by increasing strength (considering the thickness of the plates needed for construction): 316L < 2304 < LDX 2404 and 2205. The steels arranged by increasing price/tank: 2304 < LDX 2404 < 2205 < 316L.