Climate change is expected to lead to increased rainfall and higher temperatures, among other things. This will have a major impact on our cities. Floods can lead to property damage as well as damages to human and animal health. Higher temperatures will increase the frequency of heat-related health risks and premature deaths. The consequences of climate change will be particularly large in our cities because of the city's morphology with a high amount of paved surfaces and buildings that affect the natural processes in areas such as drainage and absorption of solar radiation.

Bacteria are a problem that occurs naturally in dishwashers when the dish stands there dirty for an extended period of time. To get rid of the unpleasant smell that the bacteria is causing, the most common solution is to run a regular washingcycle which can cause problems for the environmentally-conscious consumers since this causes unnecessary energy waste and emissions of chemicals in the washwater. To solve the problem in a more environmentally-friendly way by directly attacking the bacteria with an appropriate bacterialreductionmethod can therefore be an attractive feature in a dishwasher. There are many different ways to treat surfaces that have been exposed to the bacteria. Some high-profile methods are UV-radiation, microwaves and oxidant (ozone) that all three have had success in reducing bacteria in different contexts.

This master thesis project at KTH is performed in the Mechanical and Aerospace Engineeringdepartment at University of Florida (UF). The thesis is a small part of a gas turbine researchproject where a vapour absorption refrigeration system (VARS) and a high pressure regenerativeturbine engine (HPRTE) are integrated together. The main objective is to build a computermodel of the VARS. The computer model is supposed to be used to analyse the off-designperformance of the VARS and should also be easy to integrate as a subroutine in a more complexsystem model. To model the VARS some knowledge of the absorbent/refrigerant mixture had tobe well known, in this case a mixture of ammonia and water.

An investigation of the heat impact of laser cutting on the material properties when producing tensile and impact test specimens of different steel types of varying thickness has been performed. The purpose of the thesis project was to provide recommendations regarding how much material that needs to be milled from the laser cut edge before tensile and impact tests. The study has been performed partly by investigating the test specimens by heat camera when the specimens were cut in the laser cutting line and partly by performing hardness tests, investigation by microscopy, and tolerance and roughness measurements and tensile tests of the laser cut material and material produced in the traditional multi operation machine. The results show that the heat affected zone in the thicker materials is greater than previously thought of, and that the currently used recommendation has to be adjusted. The study clearly shows that the thicker the material, the greater the heat affected zone, independently of the steel type, since the thicker material takes longer time to cut.

Approximately 20% of the milk within the udder of a cow is stored in the cistern and immediately available for milk removal, while activation of the milk ejection reflex is required for removing the remaining milk stored in the alveolar compartment. The aim of this literature review is to describe, evaluate and consider implications of the three different suckling activities that the calf displays during a suckling bout. In terms of milking, these phases are represented by pre-stimulation, stimulation during milking and post-stimulation. Pre-stimulation is commonly performed in order to induce the milk ejection reflex, whereby the hormone oxytocin is released and the alveoli in the secretory tissue are contracted. Time requirements regarding pre-stimulation must be considered in relation to lactation stage and milking interval.

Nuvarande riktlinjer för hur man skall bedöma och klassificera risken för att skador skall uppstå då hand- armsystemet utsätts för vibrationer är baserade på en enkel frekvensviktningskurva. Problemet med dagens rådande standard är att den inte tar hänsyn till alla de faktorer som inverkar på risken med vibrerande handhållna verktyg, t.ex. påverkan av transienter i vibrationerna eller mängden energi som absorberas av hand- armsystemet. Ett annat problem med standarden är att karaktärisering utifrån den tenderar att bli metodoberoende beroende på vilken analysmetod som väljs. Ett sätt att ta hänsyn till fler av de bidragande faktorerna är att använda andra analysmetoder, än de som används i enlighet med rådande standard, som till exempel vibration power absorption eller analytisk wavelettransform.

The effect of climate change places demands on how we build cities. Cities have to be built denser to meet the objectives of sustainability but as a result of this densification city green areas are at risk of exploitationand disappearing. The question this raises is whether there has to be an opposition between a dense and a green city?Urban trees are playing a very important role in cities. They stand as the major part of the vegetation in citieswhich are otherwise dominated with concrete and stone.

Kväve är ett element med både positiva och negativa effekter på ett kolståls egenskaper och det är därför av yttersta vikt att under tillverkningsprocessen kontrollera kvävehalten i stålet med hänsyn till kravet på slutproduktens egenskaper. Möjligheten att styra stålets slutliga kvävehalt påverkas i hög grad av förloppet i LD-processen, d.v.s. det processteg där högkolhaltigt råjärn konverteras till lågkolhaltigt råstål, i huvudsak genom tillförsel av ren syrgas. Både kol och syre har en stark inverkan på kvävets löslighet i flytande stål. Ett flertal planerade försök med provtagning under pågående LD-process och analys med LECO® har legat till grund för en kartläggning av kväveförloppet, särskilt med avseende på konvertering av stål som återanvänds i processen, s.k.

 Meteorologiska förhållanden har en stor påverkan på ljudutbredning utomhus. De atmosfäriska effekterna är absorption, refraktion och turbulens, dessa verkar samtidigt och kan vara svåra att skilja åt. Gradienter i temperaturen och vinden gör att ljudhastigheten varierar med höjden. Ljudet kommer då att böjas av nedåt eller uppåt från marken. Kunskapsläget inom vart och ett av dessa områden presenteras i denna studie. 28 stycken trafikbullermätningar har utförts längs den nya E4:an norr om Uppsala vid varierande meteorologiska förhållanden.

AbstractWith increasing population and increasing demands for comfort and thus an increase in energy demand, it is necessary to examine various energy-efficiency measures. This work deals with the ability to control the flow through the heating system to achieve the desired comfort with as little energy as possibleA heating system contains of different parts, roughly speaking, you can divide it to three main components: Heat source, Distribution and Heat emitters. All components are working together to bring heat to the building. What is examined in this report are different ways of adjusting the flow and supply temperature and how it affects comfort and energy use in a building.At today ?s date the conventional method is to use a high flow through the heating system, which affects pressure drop and cooling of the fluid.

The production of cheese is in continuous development with objectives to in-crease productivity, achieve changes in shelf life and functional properties of the products. One concept in the development is to substitute milk fat with vegetable fats and oils in the manufacture of cheese. The objective of this study was to investigate effects on cheese yield and cheese quality of 4 different semi-hard analogue cheese products produced by substituting milk fat with vegetable fat, each analogue cheese with a specific mixture of vegeta-ble fat. As reference a cheese produced with anhydrous milk fat was used. The yield and recovery of fat and protein were determined by recording the weights of each cheese direct after press and after 20±2 days of storage and analysis of the composition of the cheeses after 20±2 days of storage. The cheese was fur-ther subjected for texture profile analysis in a TA-XT Plus Texture Analyser and analysed with Differential Scanning Calorimetry (DSC) to examine whether the fat behaves similar in the cheese as in pure form in respect to its thermal properties. The cheese yield was not significantly different when using different fats. Differ-ent amounts of water were absorbed during the water cooling.

In industries today the demand for reading the state of industrial equipment and thus prevent machine breakdown, is increasing. The company HMS Industrial Networks AB has a product on the market, Netbiter EC350 that is used to read sensors and thus find out the condition of industrial equipment. By reporting scanned data to users through a cloud service, users can keep track of their equipment. When developing Netbiter EC350 a slot was made for a Bluetooth module to offer clients a wireless reading in future developments. In this project a prototype was made to show how this Bluetooth communication can be implemented. The goal of the project was to create a Bluetooth communication between a Bluetooth sensor and Netbiter EC350. A user interface was made to allow the user to read sensor values. The result of the project shows how a Bluetooth communication can be implemented to read sensors wireless and therefore it fulfills its purpose and goal.

This master thesis was carried out for Saab Avitronics, a business unit of Saab ABactive in electronic systems for military aircrafts. Reliability and weight are of crucialimportance in this environment. To improve reliability and lower the weight graphitemay be used for electronics cooling. Graphite is an anisotropic material and hasthereof high thermal conductivity in two directions (in-plane) and a relatively lowconductivity in the third direction (through thickness).The purpose of this thesis was to investigate if graphite is an adequate thermalconductor to use in PCB carriers. The carriers support and cool the PCB by divertingthe heat dissipation from the PCB components to the edge.

Man's life has changed in many ways since technology made it?s entry for public at large. In response to this change the science of human-machine interaction was invented. It has in turn evolved into human-computer interaction. With this science the focus is on the customization of the system for the actual person who will use it.The thesis has been implemented in a telecom company's development department.

Water connects heaven and earth. Water is the most obvious element of nature. To move in water is for me more than cooling of on a hot summer?s day. It is about freedom and the feeling of being above the state of things.