In Sweden, harvesting pre-commercial thinning (PCT) stems for energy purposes is a interesting way of financing the high cost of preparing dense stands for a profitable first conventional thinning. This concept can be labelled bioenergy thinning. The aim of this study was to quantify the productivity of a Vimek 404R light harvester with an accumulating Naarva-Grip cutting head during the bioenergy thinning of a self-regenerated stand west of Sunnansjö in Dalarna. The stand was birch-dominated, contained 15 371 stems/ha, and measured on average 4,6 cm Dbh and 7 m tall. Even though the driver was well experienced with the machine, the stand in question was the first one that he ever thinned in this manner. Nevertheless, the driver strived to accumulate as many stems as possible during each crane cycle and chose to cut taller stems in half so as to make the handling and forwarding of the harvested stems easier.

The aim of our research was to investigate if oat is capable of extracting cadmium to such extent that it is usable in decontaminating polluted soils. We grew oat in a hydroponic culture during 28 days in a controlled environment and a total of 30 plants were used. The nutrient solutions were contaminated with cadmium of ten different concentrations after seven days. After harvesting the plants, the roots were separated from the shoots, placed in separate containers and then turned to ashes. The cadmium content was measured three times per sample in an atomic absorption spectrometer.Our results indicate that the ability of oat to extract cadmium from a solution is linearly dependent of the cadmium concentration of the solution.

Due to the requirement for reduced use of insecticides and the lack of competitive mechanical plant protection, you need a scarification with good result. This is often no problem to perform in normal terrain without technical barriers. However, in difficult terrain with large number of rocks and steep slopes, the result would be worse. The purpose of the study is, that in these areas with difficult terrain, to find out the scarified areas quality, describe the non-scarified areas conditions and find out where the limit is for the use of a traditional disc trencher. Findings indicate that there are usually not the machine that is the limit, but the driver of this.

The purpose of this thesis was to develop and optimize a method of analysis for combustion of organic chemical products, followed by an ion chromatographic quantitative analysis. This was to be achieved with the decomposition equipment IKA AOD 1. The aim was to receive a precise and repeatable method that would be able to be applied to the process of qualification and technical marking of chemical products at the company, OKG AB in Oskarshamn. A complete instruction for the decomposition equipment and the method of analysis was written. A number of parameters were chosen from the general method of the combustion equipment, which then was tested parallel with a simultaneous development of an appropriate ion chromatographic method.

Nanotechnology, one of the most interesting sciences today will no doubt have an enourmous impact on tomorrow's society and industry. One of the most interesting nanomaterial that has been discovered is the semiconductor quantum dot (QD). This material shows interesting novel properties such as a size-dependent band gap, which is an effect caused by the quantum confinement effect in all three dimensions. Due to this phenomenon the absorption spectrum can be tuned to the desired value by adjusting the size of the QD.This thesis aims to investigate how the solvent ratio of H2O/Ethanol affects the optical and structural properties of copper sulfide QDs manufactured in a chemical synthesis way using modern microwave heating. The process of manufacturing QDs using chemical synthesis often involve a capping-agent to prevent the QDs from agglomerate into bigger structures.

It is important for today?s farmers to minimize the costs for crop establishment, because of decreased prices and support from the EU. Farmers, who plow in autumn on heavy clay soil, often do some kind of tillage in autumn to get better soil structure before spring seeding. This is especially important when growing small seed crop, e.g. sugar beet and oil plants.

To maintain production in high salaries countries and strength in competition against other companies, it is today more important than ever to maximize production, offer a wide spectra of products and be able to deliver on the customers desire of shorter and shorter delivery time. Flexible production and short time spent on die changes is vital to achieve these desires. The interest for die changeover time reduction grew in the same pace as the demand for increased product variety grew. SMED as a method of reducing time spent on die changeovers were developed in between 1950-1970, by the Japanese Shigeo Shingo.The purpose of this thesis work has been to investigate the result of SMED in a die casting facility, and compare the result from it with the result considering time spent on die changeovers when investing in new equipment. The goal is to implement a thorough investigation by using the SMED method at Tenhults Pressgjuteri AB and make a brochure that have to be simple to understand, in purpose to draw interest to the advantages of using SMED as a method.Commissioned by the Swedish foundry association Swecast, the work has been carried out by studying die changeovers at Tenhults Pressgjuteri AB, where filming and interviews with the operators have been included in the analysis.

Like many small-time companies there is a need to improve the flow of materials at HSP-Gripen AB. The company develops and manufactures hydraulic-powered grapples for the machine- and forest industry. By mapping the material flow in the current production and gathering necessary data, suggestions on how different parts of the production could be controlled is presented in this dissertation. This has been achieved by the study of relevant scientific literature. The suggested ways of controlling the production consist of 2-bin systems, hybrid material flow system as well as a cyclic product-planning.

AbstractOne opinion among people who are experienced in hand rearing newborn mammals is that goat milk is more suitable than cow milk if the young needs a milk replacer. The purpose of this literature review was to find out if there is scientific evidence that goat milk is a better milk replacer for piglets, rat pups and foals than cow milk. The milk is essential for the newborn animal, as its only source of nutrition until it has learned how to eat solid food. In this literature review, the composition of goat milk and cow milk is compared with the nutrient requirements after birth in piglets, rat pups and foals. The nutrient requirements and the milk composition are partly determined by the newborn mammals activity level and suckling frequency, which also is described.

Vår utgångspunkt för uppsatsen var att erbjuda en fördjupning i bankens, enligt vår mening, intressanta affärsmodell. Utifrån vår fallstudie presenterar vi hur bankföretaget integrerar externt producerade finansiella produkter och vi studerar modularitetstänkandets eventuella tillämpbarhet på externt producerade finansiella produkter. Vidare ska vi identifiera möjliggörare, interna resurser som möjliggör strategisk flexibilitet och dynamisk förmåga.I det förändrade konkurrenslandskapets spår följer ett behov av att komplettera den resursbaserade ansatsen med begrepp som strategisk flexibilitet, dynamisk förmåga. Strategisk flexibilitet och dynamisk förmåga ställer ytterligare frågor om hur dessa skall hanteras varvid begrepp som absorption capacity och modularitet ytterligare definierar hur detta uppnås. Vi skall i denna studie analysera vilka interna resurser, möjliggörare, som är centrala för att integrera externa leverantörers resurser som sina egna..

Jag undersöker huruvida fundamentala faktorer såsom konsumtion, investeringar, statliga utgifter samt utländsk exportefterfrågan inverkat på fluktuationer i USAs reala växelkurs mellan 1970 och 2005. Ekonomin beskrivs av en Mundell-Fleming-modell. Utifrån denna konstrueras tillsammans med en dynamisk exportmodell av Gottfries (2002) ett uttryck för en hypotetisk real växelkurs, vars utveckling jämförs med den faktiska växelkursutvecklingen. Jag finner vid denna beräkning samt vid en statistik analys, båda grundande på kvartalsdata, att den faktiska växelkursutvecklingen föregår chocker i konsumtion, investeringar, statliga utgifter med tre-fyra års sikt, vilket jag tolkar som att marknadens aktörer förutser förändringar inom de fundamentala faktorerna och påverkar valutaflödena därefter. Detta resultat utmärker sig från rådande empirisk forskning, som överlag inte finner något samband mellan växelkurser och fundamentala faktorer..

The purpose of this report is to investigate the business relationship between forest machine entrepreneurs and company officials within a timber area at one of the Swedish forest owner associations called Mellanskog. This report shows how these people work with their business relationships, what they believe are the keys getting a successful relationship and how they have got were there they are now. Key words: Business relationship, cooperation, team work, communication, negotiation, respect, commitment and trust..

In this study the opioid buprenorphine was given to 8 clinically healthy goats. The pharmacokinetics and behavioral effects were studied. Injections of buprenorphine, 0.02 mg/kg body weight was given both intramuscularly (i.m.) and intravenously (i.v.) with a cross over design. The results showed a short half-life of the drug in the plasma, 65.9 ± 17.4 min (mean ± SD), after i.v. injection.

This investigation?s task was to map manufacturing of special qualities at Stora Enso Packaging under a certain period, analyze if rules concerning special qualities is followed, which consequences this results in concerning use of paper, waste and costs and to give suggestions on alternative solutions. The goal was to give sugges-tions that help the company to reach its business ratio that the production de-partment uses within use of paper and productivity in the corrugated cardboard machine.Stora Enso Packaging is a part of the forest group Stora Enso and is one of Swe-den?s leading producers of corrugated cardboard. Stora Enso Packaging acts pri-mary on the Swedish market, where they have a market share of 25 %.To be able to analyze orders with special qualities we did a data collection during two months, where we mapped incoming orders.

Nowadays, cooperation is necessary and this study tries to illuminate the possibilities and problems about cooperation in fiction between 7 small/midsize farms in Skåne. Conventional Farming is done with grain and sugarbeets as specialization. Calculation of machine costs have been done and compared in the study, both for the farms in thorough and the fictitious operation companies. Business ratios as depreciation/ha, interest/ha and maintenance/ha have been calculated. In this essay we present a proposal about how a practical implementation can be done. In the proposal there is an example how the distribution of work can be done.