Sök:

Sökresultat:

200 Uppsatser om ABB Machines - Sida 11 av 14

Energieffektivisering i ett verkstadsföretag : En analys av energibesparande åtgärder samt uppvärmnings- och kylsystems driftkostnader och koldioxidutsläpp

The energy use in a workshop company has been examined in this work in order to find areas for energy efficiency improvement. The combined oil and electricity heating in the company were compared with other alternative heating systems including cooling of the premises in following combinations:Ground source heat pump for heating and coolingDistrict heating and absorption coolingDistrict heating and low temperate surface water coolingEnergy use, operation costs and carbon dioxide emissions were calculated for the current heating systems and the three alternatives including cooling. The ground source heat pump for heating and cooling decreases bought energy with 34 MWh annually compared to current heating only. The district heating and low temperate surface water cooling has the largest reduction of operation cost and carbon dioxide. The operation cost decreases with 42 kSEK and the carbon dioxide with 43 metric ton CO2 annually.

Gårdsbutiken : att välja marknadsföringsstrategi

The agriculture of today is getting larger and larger and it demands more efficient machines to handle these larger units. But all farmers don?t have the opportunities or don?t want to expand. What should they do if they want to remain on the farm? An alternative is to start a farm shop.

Flexibla fixturer i bearbetande maskiner

This thesis was conducted at Linköping University and Saab Aerostructures DPS, Linköping, and focuses on the possibilities of flexible fixturing in machining applications. The thesis is part of the research project "Koofix", which is collaboration between Linköping University and a number of companies.The thesis is aimed towards small batch production which, for Saab Aerostructures DPS, means diverse part geometry and that parts are manufactured in very small numbers, sometimes just one piece. The result of this is that expensive dedicated fixtures are made for most parts. By introducing more flexible fixturing methods to this kind of production the cost of fixtures and tooling will be reduced, and make the production more efficient.New flexible fixturing methods has been presented and evaluated through the thesis, which has resulted in three different concepts. These concepts have been the result of literature screening and study of current manufacturing process at Saab Aerostructures DPS.

Jag vill meddela mig : Exil, psykoanalys, 40-talism och det politiska i Peter Weiss tidiga svenska prosa

In Peter Weiss debut Fra?n o? till o? (1947) the ?I? travels from island to island as a castaway. The island here can signify, or work as a synecdoche for exile and the feeling of isolation that exile often induces. But the movement from island to island also implies a restless state: Peter Weiss shifting from painting to writing to filmmaking and theatre, from German to Swedish and then back to German. The years during exile and the years that followed the exile until his breakthrough in Germany with Schatten des ko?rpers des Ku?tchens (1960), Abschied von den Eltern (1961) and Fluchtpunkt (1962), were the formative years of Peter Weiss authorship.

Modell och analysverktyg för beräkningav frekvensförlopp

The power system modelled in this thesis work has been developed for simulationwhen e.g. the production in some part of the power system is changed. The powersystem has been modelled according to the swing mass of the system, the frequencydependency of the load and the turbine governor. The model determines the systemfrequency, the period of regulation and the power exchange between the differentsubsystems in the Nordic synchronized system.In this model the system frequency is assumed to be the same in all different parts ofthe power system and the voltage conditions in the power system are neglected. Forthat reason power swings does not occur between different subsystems in the powersystem, which usually occur as a result of the swinging connection between thetransmissions line.

En studie av en industrirobots beteende vid borrning

In the assembly process of airframe structures there are many drilled holes and on some parts the holes are mainly drilled manually with pneumatic handheld drilling machines. During conventional drilling in metal, burrs appear. To remove these burrs the parts of the structure must be separated and deburred before they can be put together for fastening. This is a time consuming measure and therefore expensive. To facilitate this process and lower production costs some parts of the process needs to be automated.A part of this thesis was a project in co-operation with Saab, Novator, Specma Automation and the University of Linköping.

Konstruktion av patientsimulator för anestesimaskiner

A patient simulator for testing anaesthesia machines has been developed at Maquet Critical Care AB, to reduce costly and time-consuming experiments on animals. The device simulates human lungs regarding lung dynamics and volume, uptake of anaesthetic agents and the production of carbon dioxide, heat and moisture. Further demands on the simulator are durability and size; the device shall be compact enough to be moveable.The resulting simulator fulfils the requirements and enables better repeatability and ability to test extreme cases than experiments on animals do.Uptake of the anaesthetic agent is achieved in a active carbon filter and controlled by regulating the flow. The flow is created by a regenerative blower and controlled using a proportional valve. The uptake can be set by the user or by a simple uptake model modified to recursively handle changes in the concentration of anaesthetic agent.Carbon dioxide is fed into the system from a tank by a mass flow regulator.

Långvarig ventialtorvård hos patienter med hög ryggmärgsskada- tid för urträning och bakslag i form av returer till intensivvårdsavdelning

Background: Patients with cervical spinal cord injuries are often dependent on a mechanical ventilator due to the damage on the innervation to breathing musculature. During rehabilitation they have to be trained to regain own breathing. This unweaning process may give respiratory complications, which are main causes to morbidity and death. These respiratory complications are traditionally treated in an intensive care unit (ICU), which means that the patients have to return back to these emergency units.Aim: To investigate number, length and causes of returns to intensive care units and the length of the weaning process. Further, to compare if a multidisciplinary approach to the weaning process may reduce ICU returns and to shorten the weaning process.

Maskinsäkerhetsstandarder och lönsamhet : Profitability of standardisation and safety of machinery

The composing of new standards in the area of machinery safety is a continuous work which aims at writing standards that works as a tool for companies and enables them to control if the fundamental demands of security and health which is prescribed by law are reached. It is optional for the companies to choose if they want to use the standards. This report is written in cooperation with SIS and the study were performed within the technical committee SIS/TK 282. The report aims to investigating if the companies that choose to use standards see any economic advantages due to this work, how these advantages take form and where they originate. The main question formulation is how the profitability among companies that have adjusted their production to machinery safety standards are affected. The study was performed with an initial literature study which aimed at obtaining knowledge and an overview over the subject as well as investigate what former studies had resulted in.

Investeringsförslag till slipstation för servicearbete av skruvmatare

The project ?Investment proposal for grinding station for service work of screw feeders? has been performed during the spring semester 2014 for the course Bachelor?s thesis for degree of  Bachelor of science in machine engineering at Karlstad?s University. The project has been performed in cooperation with Fiber Workshop which is a service department in the company Valmet AB. Valmet AB is a company that develops and manufacture soft paper tissue machines. The screw feeder is a part that is used to feed, and squeeze out the water out of woodchips.

Invandrares upplevelser av diskriminering och den politiska diskursen om invandrare i Sverige mellan 1960-2009

Aim: This paper aims to produce a serviced office concept adjusted to Statens fastighetsverk. The concept will make SFV:s properties more attractive for renting. Method: Information has been collected from interviews with 13 different serviced office companies, one serviced office agent and eleven government authorities. Also litterateur, reports and internet have been used in gathering information.I will use following questions:¨      How is the serviced office concept designed?¨      Which customer segment should SFV direct to and what need does the segment have?¨      How shall a marketing plan look like for the concept?¨      How should a concept designed for SFV look like? Result & Conclusions: Serviced office space is a company that letting functional workspace with access to shared facilities e.g. reception, office machines, internet, phone and more.

Transformatordiagnostik genom dissolverad gasanalys

The transformer is one of the most common and most important electric machines for power companies. Cost of investment and the economic worth of a transformer are counted in millions of SEK. Because of that, proper maintenance actions that may lead to longer technical life time should be the aim in all situations.The aim with the report was to perform transformer diagnosis by dissolved gas analysis on Umeå Energi AB´s power transformers and a risk assessment. The report should also contribute to longer life time for the transformers.Oil samples were taken from each transformer two times. The first sample in summer 2013 and the second in April 2014.

Myndighetscentret ? En kvalitativ studie av myndigheters lokalbehov och en utveckling av ett kontorshotellskoncept

Aim: This paper aims to produce a serviced office concept adjusted to Statens fastighetsverk. The concept will make SFV:s properties more attractive for renting. Method: Information has been collected from interviews with 13 different serviced office companies, one serviced office agent and eleven government authorities. Also litterateur, reports and internet have been used in gathering information.I will use following questions:¨      How is the serviced office concept designed?¨      Which customer segment should SFV direct to and what need does the segment have?¨      How shall a marketing plan look like for the concept?¨      How should a concept designed for SFV look like? Result & Conclusions: Serviced office space is a company that letting functional workspace with access to shared facilities e.g. reception, office machines, internet, phone and more.

Konkurrensrätt : Innebörden av artikel 82 EGF

The competition policy in the EU should guarantee that the competition is not distorted in the way that would prevent or create difficulties for the free mobility of goods and services between Member states. It is prohibited for companies to abuse their dominant position according to Article 82, if it affects trade. The essence of Article 82 is control of market power. The perfect competition results when supply and demand appoint the price and quantity of a product. Firms are encouraged to compete then it results in efficiency, quality products and lower prices.

Planering av vägupprustning med hjälp av GIS och optimering : en fallstudie på Holmen Skog

The objective of this thesis was to develop a method for the planning of road upgrading at Holmen Skog, a Swedish forest company. A critical issue for creating such plans is to identify roads that are suitable to upgrade to a standard that can handle heavy traffic during spring thaw, since spring thaw is a bottle neck for transporting timber. The method was tested in a case study at a district. The work consisted of two parts. The first was to retrieve and prepare geographical data for the roads.

<- Föregående sida 11 Nästa sida ->