Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

As the ability to computerize processes and tasks increase, the proliferation of complex systems in our society continues. How these systems are deployed in the organizations where they are meant to be utilized has been shown to have a large impact on how well they function.In January of 2011 the Enköping hospital initiated the deployment of an IT-support for drug management, a module in the general health care system Cambio COSMIC. Other health care providers in the county, and in the rest of Sweden, have had mixed feelings toward the module. Some have outright refused the module, claiming that it is detrimental to patient safety. One of the arguments for deploying the module in Enköping, however, was that it was needed to improve patient safety.The Enköping hospital is considered to be a well organized institution with good leadership and earlier good experiences regarding IT-systems.

BIM has been a trend in recent years when it comes to design and construction ofnew buildings. However, there has been less talk about what happens to BIM modelsafter the construction phase.This issue has been raised at the Forsmark construction documentation department.This thesis aims to look at how the information in a BIM model can be transferred tofacility management and GIS systems and thus add value, even after the constructionphase.Questions raises how such an exchange might look like and whether it is reliable.How should a claim be brought to planners for such an exchange to work.This thesis tested some of the most common methods for this kind of exchange ofinformation from BIM models to facility management and GIS. It was formats like IFC,Fi2xml and a database connectivity that was analyzed by a computer simulation of amodel provided by Forsmark. The model consisted of an existing office building atForsmark, modeled in Autodesk Revit.The results indicate that the formats tested require a precise plotting of the models.The loss of information that came to light in the simulation could be attributed tofailure modeling in Revit. Even such things as naming of areas must be consistent.

Mitt mål var att skapa västra söders identitet och samlingsplats, vilken helt saknas idag. Utmaningen var också att transformera Hornsbruksgatan från en baksida till en tillgänglig plats. Högalidsparken förlängs ner till gatunivå - Hornsbruksgatan blir en blandning av park/ torg genom ett specifikt grönt plattsystem. Nya stråk och ramper binder ihop nuvarande gatu- och parknivån. Bebyggelsen är småskalig och nätt, ändå är programmet större än förslagit proram.

In today's producing companies, there is a high demand on early integrated productdevelopment. One way to facilitate communication between departments and collaborationbetween people and thereby enable early sharing of product information within the companyis to use PLM, Product Lifecycle Management.The CAD environment at Scania is at the moment being upgraded from Catia v4 to Catiav5. In this stage it is important that also the interacting computer systems in Scania?s PLMenvironment are adjusted and in the future join the development. Scania has an idea of howthese systems will be developed as the transition from Catia v4 to Catia v5 is being carriedout.

ABSTRACT: Commercial swab transport systems are used for collection and transporting of fecal and other microbiological samples. This system must maintain viability and contribute to survival of microorganisms during transport to the laboratory. Four swab transport systems have been compared, eSwab, ?- Transwab and fecalSwab, all three with flocked swabs, and Copan Venturi Transystem with rayon swabs. The study followed the recommendations from the Clinical Laboratory Standard Institute; document M40-A for recovery of Samonella, Shigella, Yersinia and Neisseria gonorrhoeae after storage for 0, 6, 24, 48 and 72 h at room- (22-25°C) and refrigerated (2-8ºC) temperature.

This is a Master´s Thesis based on my own idea instead of that of a company. It is a survey that focuses on finding out more about which part of the development process that is blocking the establishment of electronic scorecards on the golf market. Why has it not been introduced on the market in a larger scale yet, considering the technology we possess today? This question is investigated through interviews with the Swedish Golf association, and three companies that have chosen different paths to implement an electronic scorecard. The interviews focuses on finding out what developers and the association believe to be the main problem, before taking the next step in releasing electronic scorecards on a larger scale.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

The main aim of this research is to survey the general colour scheme for private dwellings inVisby, built 1860?1930. During this period the visual appearance of the town of Visby changedsubstantially, since the increased local production of lime led to the plastering of many woodenbuildings. Which colour schemes were chosen for the different building types of the historic centreof Visby, and which colours came to dominate the time period? The methods used for answeringthese questions have partly been field studies on site and sampling of selected buildings, andpartly critical reading and observation of iconographic material (paintings, drawings, aquarelles,postcards and photographs).

The existence for companies today consists of constant challenges with customers that want more individual products with high quality as quickly as possible. For a company to be able to have a short delivery time, it must also have a short production time. This makes streamlining and improvement of processes a big part of a company?s workThis thesis has been carried out together with the company Lasermax Roll Systems AB, a world-leading manufacturer of feeding, finishing and monitoring systems for high-speed digital printers. They manufacture their products according to the assembling for costumer order principle.The purpose with this thesis is to map and analyze, the assembling process and the test process at Lasermax Roll Systems AB.

ABB and Prevas have initiated a collaboration to sell a system to optimize steel industry furnaces, called FOCS. The purpose of this thesis is to investigate possibilities for integrating Prevas FOCS and ABB 800xA.The result of the investigation is used for an implementation of a prototype of the integrated system. The study shows a general method that can be used when implementing two software systems. The prototype of the integrated systems is made with usability principles in mind. This is a very important aspect in order to create a good working environment for the operators of a steel plant.

The main purpose of this thesis has been to investigate librarians opinions about the need for and possibility to use non-roman script in library catalogues. We have also investigated the routines of handling materials in non-roman scripts in two Swedish libraries. The investigation was made in the light of the recent shift in character set in the Swedish National Library Catalogue Libris. This change will enable use of multiple writing systems in the future.Our findings are that a multicultural society requires special consideration to the needs of citizens who speak other languages than the majority of the population. This becomes difficult when the languages spoken have a different writing system than the one used by the majority.

The trend in milk production is similar in Sweden and across the world; the farms are getting fewer but increasingly bigger. The costs for hiring workers are increasing, which results in more cows per animal keeper. Sensors can then be a great tool for keeping track of animals which need special attention. With a reported decreasing fertility, sensors that can detect oestrus even at low levels can be especially helpful in bigger herds to pinpoint the cows that may be in oestrus. The number of farms with dairy cows that install AMS, Automatic Milking Systems, are increasing, and that also increases the need for sensors to control milk quality and composition when there is no visual control of the milk by a milker before milking starts.For the sensor data to be useful you have to have software designed to analyze and interpret the data to get relevant information that the farmer can use.

Vad är ett ?Urban building??Den första tanken som slog mig var en byggnad liknande ett komplex, med en mängd olika funktioner.Därför blev det ett självklart val för mig var byggnadens footprint skulle vara, när jag såg den "övergivna" landsplätten. Jag skulle vilja kalla den för en tom lucka kanske. Vidare tänkte jag vad detta komplex av byggnad skulle vara. För mig var det viktigt att skapa en mötesplats för människor, men med det sagt, inte ett kommersiellt centrum.

This report describes the working process and creation of a new website for Lindt & Sprüngli Sweden with the help of the content management systems Magento and TYPO3. The report shows how different elements are created and published on the website, how the education in these systems was acquired and how contact with third party companies has been initiated and maintained. It also accounts for what is shown on the website as well as why it is shown. The goal with this project is to deliver a complete website to Lindt & Sprüngli Sweden where customers can find information about products as well as the company. The results of this project was a website that was launched on www.lindt.se on the 17th of June 2015..