IT-användandet i byggbranschen har banat väg för nya, effektivare arbetssätt och det finns visioner om hur det ska fungera. Syftet med vårt examensarbete är att ta reda på byggbranschens användande av, och vision om BIM. Vad är BIM ? Building Information Model?Kort beskrivet är BIM en modell där all information för ett byggprojekts hela livscykel kan hanteras. BIM förenklar det fortlöpande arbetet genom hela byggprocessen genom att tillhandahålla information om projektet som är relevant, uppdaterad, integrerad, fullt koordinerad och av hög kvalité.

The aim of this study is to investigate which management control mechanisms evolve in companies that receive funding from Venture Capital companies and why the management control systems evolve in the way that they do. A case study was performed on three Swedish high technology companies, that all received funding from Venture Capital companies for the first time in 2006. Merchant?s framework, defining all management control mechanisms as either, results control, action control or personnel control, was used to structure the study. Results show that the companies that received Venture Capital all increased the use of management control mechanisms within results control, action control and personnel control.

Quality assurance of construction projects and create effective ways of working, is intoday's pressed position, major objectives for building contractor companies. This thesis is an attempt to see if it is possible to achieve these goals with the new modern tool iPad.The author of this thesis has during the latter half of his one year practice work in Uppsala for the Swedish building construction company NCC Construction Sverige AB, conducted a study on the possibility of using the iPad on an construction site. This has been done with active field studies in which applications have been tested and also the supervisors receptive. The usability of the iPad has always been in focus since it is important that the applications are easy to use and easy to learn.The results of the work, as presented in this report, points at opportunities in efficiency if the iPad is introduced and used on construction site. There are many useful applications for the iPad, and with a system that can handle the synchronization between the iPad and the computer, the workflow will be streamlined significantly..

In the construction industry today there is a significant technological revolution goingon. New methods for automated processes and information management are developedcontinuously. Intense studies are currently taking place to ensure ways and means toembrace the new technology of BIM.At the present, environmental certification systems are considered cumbersome andchallenging. However, the increasing demands of sustainable development in the constructionindustry imply that the environmental certifications will not disappear. ThisMaster Thesis examines the possibilities to apply BIM technology within the field ofenvironmental certifications to streamline the processes.The applications that provide the best opportunities are:- To use BIM to be able to, during the design stage, dynamically evaluate the resultor score a certain building will achieve.- To avoid unnecessary work through collection of data for calculations directlyfrom a BIM-model.- To be able to automate certain time consuming calculations that are currentlyperformed manually.- To automatically examine the completed model to ensure that the demands arefulfilled.The possibilities to use BIM within these areas are however limited by the technologyitself.

The world is changing and the business context is no exception. One of the clearest tendencies is a tougher business climate with harder competition due to increased international trade and the expansion of the e-business. At the same time the customers are becoming more sophisticated and demanding. The last decades have also meant that tougher and more frequent demands are being aimed at the businesses from a wider variety of stakeholders; demands regarding how environmental issues, social responsibilities and business ethics should be dealt with. All of the above have driven companies towards implementation of different management systems to be able to cope with the demands as well as to ensure that these issues are being dealt with in an efficient and effective manner.

This study aims to investigate how small scale manufacturing companies reason around an implementation of a PLM-system, as well as the suitability of these systems compared to larger companies. The study is built on a qualitative method. Initially, secondary data was gathered through books, articles and reports. Primary data was gathered through four interviews. Two interviews were performed with PLM resellers, one interview was performed with a PLM developer, and one interview was performed with a small scale manufacturing company that opted to not implement a PLM-system.The results imply that overall differences between larger and smaller companies exist in regard to the need of PLM systems.

Sweden has formulated ambitious energy goals which signify that by year 2050 the energy usage should be halved. One of the objectives is the reduction of energy usage by 20% by year 2020 and that it should be compared to the usage of energy from 1995. In parallel with increased energy requirements for buildings the demand on housing conservation, by highlighting also buildings from the last 50 years as part of the building heritage, continues to enhance, which in theory means that there is a conflict between these.The law will never be able to point out unique buildings and PBL (planning and building act) is not especially concrete. The National Housing Board has tried to make this more concrete by the new BBR regulations though there are still an enormous variety of interpretations.This report deals with the conflict between conservation requirements and additional insulation of the building envelope and is limited to multi-residential buildings built between the years 1945 and 1975. It is the stock with the greatest energy consumption and that is where the big challenge lies.

Today most ice rinks in Sweden use secondary refrigeration systems with a solution of calcium chloride and water as secondary refrigerant. Due to the large amount of energy such a system uses more efficient systems would be desired.An earlier study concluded in the possibilities of using carbon dioxide as secondary refrigerant with copper tubes as the loops in the ice rink. Since then 3 ice rink refrigeration systems has been built with carbon dioxide in copper tubes. Excluding the ones being direct involved in those projects there is still very little knowledge about how these system works. This study has been made primarily with the aim of adding to the knowledge concerning availability and cost and secondary to look at possibilities for improvement.A comparison between systems with carbon dioxide, calcium chloride respective ammonium solved in water has been made by using Decision Matrix.

The ÅF Group is a leader in technical consulting, with expertise founded on more than a century of experience. They offer highly qualified services and solutions for industrial processes, infrastructure projects and the development of products and IT systems. They are also one of the leading names in certified third-party testing and inspection work.Today the ÅF Group has approximately 4,000 employees. Their base is in Europe, but their business and clients are found all over the world.A part of ÅF-Engineerings business is programming different automation systems to clients. Another part is support in both telephone and personal visits.Because the number of clients is high and the flora of different automation systems is big the consequence is that the employees must have access to many licenses with programming tools.

Purpose: The purpose of this study is to examine how a company with a single brand is perceived as uniform, as well as how they use internal brand building to reconcile various competing actors within one brand. Furthermore the aim is to examine how staff, through internal brand building processes, perceives and identifies themself with the values of the common brand. Method: A case study with method triangulation was conducted at Nordiska Kompaniet department store in Stockholm. Quantitative data through a questionnaire survey with employees combined with two observations. Qualitative data was given through an email interview with a responsible manager of digital channels and PR from NK AB.Theories: This study has used the following theories; Destination marketing, Corporate brand, internal branding, corporate identity, corporate culture, brand value, service brand values, brand citizenship behaviour.Conclusion: This case study of NK has shown that internal branding building in a department store is a comprehensive work, which all involved must have a unified perception and understanding of the brand, in order to successful unite under one brand.

During 40 years of industrial production, from the end of the 1890?s until the end of 1930?s, coal and wood distillation products were manufactured in AB Carbo?s tar factory along the River Gimån in Grötingen, in the county of Jämtland, Sweden. In accordance with the Swedish Environmental Protection Agency?s Methods for Inventories of contaminated sites, MIFO, the site in Grötingen has been identified as a potentially contaminated site. In order to determine whether toxic substances pose a threat to human health and ecological systems in the area, there was a need to investigate the presence of contaminants, their levels and potential for migration.

For nearly twenty years people have been talking about Product models, but given that the building industry is so conservative, it is hard to implement new working methods. Product models are these days known as Building Information Modeling, BIM. People often say they work with BIM but they often forget the most important part, the information. A 3D model should be linked with characteristics and information. Information that can be invaluable for the facility manager.We have a vision that in the best of worlds the facility manager would be able to "walk" into the model and see what kind of installations are inside the wall or in the roof.

We have the tradition in Sweden to build villas and houses with a wooden framework. It has become natural for us because we have so much forest in our country. Building with wood has advantages, it is easy to process, but also disadvantages, as it is sensitive to moisture.Finland has long made use of the thermal blocks to build villas. It is a type of bricks that are a bit like a sandwich element, with a core of EPS and concrete on both sides of the core material. The concrete is hollow, so that after the walls has been bricked up you pour concrete into the hollow bricks.The issue of this report is to find out if concrete can be an alternative to wood as framework material in villas.

The purpose of this study is to show the technical building requirements for modern arenas inSweden. The study will also create an understanding of how the requirements affect theSwedish football arenas which are affected by the regulations valid from 2014. As one of theSwedish football arenas there is Örjans Vall located in Halmstad. The aim of this study is todevelop alternative solutions regarding the technical problems Örjans Vall is facing 2014,when the new arena requirements for ?Svensk elitfotboll? are taken into use.

Ocean Thermal Energy Conversion, OTEC, is a sustainable energy conversion technology that is not yet commercialized. OTEC is a technology that utilizes the temperature difference in oceans between the warm surface water and the cold water at 1 000 m depth to run a Rankine Cycle. This technology can produce electricity and provide synergies like fresh water, air conditioning and aquaculture. A simulation program for three alternative OTEC systems has been created in order to decide which OTEC system is most profitable; closed, open or hybrid system. In this simulation a production cost analysis is performed in order to investigate and decide which one of the three systems that has the lowest production cost. The production cost analysis also analyzes if the profitability is affected by the size of the facility. After these analyzes, the most profitable of the three different OTEC-systems is expanded by an installation of solar collectors in order to see if the thermal efficiency is improved. The result shows that the most profitable system varies with the size of the facility.