AbstractThe subject for this thesis is the Swedish gaming monopoly. This thesis describes the Swedish legislation that regulates the market for gaming in Sweden. The European legislation is also explained in the thesis; both the rules in the EC treaty and the rulings made by the EC court of justice (ECJ). The purpose with this is to see if the Swedish legislation can be upheld considering the rules set up by EC law. The second part of the thesis is focused on the actuality of the problem and the future possibilities for the regulation.

During the migration season in 2013 a study on spawning migrating salmon and the effect of water flow on the behavior was conducted of the salmon at the Forshaga hydropower station in the River Klarälven. The River Klarälven with its nine hydropower plants on the Swedish side, constituting migration obstacles for the migrating salmon. Fortum Generation AB has together with the County Administrative Board restored a salmon trap at the lowermost hydropower station in Forshaga, aiming at making it possible for the salmon to swim into the trap, and thereafter be transported by truck past the power plants and then continue their journey to the spawning grounds on their own. Unfortunately, it is believed that the trap does not work as well as it should. In this study, I focused on salmon position in relation to water flow and if the number of salmon that swam into the fish trap differed between salmon with previous experience of the trap (experienced) and salmon without experience (unexperienced).

This essay examines the process of fair value accounting of financial assets in a Swedish commercial bank, in contrast to the theoretical approach stated by IASB. The theoretical background contains a review of the academic standpoint on fair value accounting and historical cost accounting, a detailed description of fair value accounting according to current and future IASB regulation and on the American FAS 157 regulation. The empirical case study describes the process of valuing and classifying financial assets into level 1 and level 2 of the fair value hierarchy. The analysis describes how the legal requirements for classification are interpreted and applied in practice when valuing bonds and derivatives. The authors provide an explanation as to why the majority of financial assets are valued mark to model rather than mark to market as well as a suggestion on how the share of market valued assets can be increased..

Through the rulings RÅ 2010 ref. 11, HFD 2011 ref. 75 and HFD 2011 not 88 the Swedish Supreme Administrative Court have extended the concept of same or similar activities which can be found in section 57, clause 4 of the Swedish Income Tax Act. Through the ruling the Court has partly clarified the application area of the regulation but question marks still remains.In the statutory text there is no definition of what shall be regarded as same or similar activity and the preparatory work does not give any further direction on how the concept should be interpreted. Ever since the amendment in 1995 the general view has been that activities can be transferred between different companies without affecting the waiting period in the company of origin.

In recent years, several scandals have been revealed where public employees been involved. Some researchers argue, moreover, that the NPM's rampage has led to an increase in the risk of corruption in public administration. The Regulation on Internal Control shall, according to the government, lead to adequate protection against corruption by analyzing and managing risks. However, Riksrevisionen have criticized the authorities' protection against corruption to be too unstructured and unsystematic. In addition, they questioned whether the regulation really has significance in the work against corruption.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

De kommunikationsfo?ra?ndringar som kommit med den tekniska utvecklingen har fo?r organisationer inneburit en o?kad komplexitet och decentralisering som sta?ller ho?gre krav pa? den enskilde medarbetaren. Det har a?ven fo?ra?ndrat hur medarbetarna tar till sig, fo?rmedlar och bearbetar den information som ges. Fo?rutom att inneha?llet i det som kommuniceras bo?r fo?rega?s av relevans sta?ller det ocksa? krav pa? fo?retagsledningar och enskilda avdelningsansvarigas kommunikationsinsatser.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

Microproduction, also called distributed generation, is something that has become more and more popular in the electric grid. Microproduction can however lead to unacceptable performance if several units are installed in the same low voltage network. It is therefore good to know a limit where the performance of the low voltage network becomes unacceptable based on given parameters. This limit is usually called hosting capacity.In this report the hosting capacity with respect to voltage and current have been studied in three low voltage networks which are located in Falu Elnäts concession area. This has been done by simulations in a GIS-program where critical times of the grid have been simulated.

During the development of microwave based sensors such as radar target seekers, input signals are needed to verify the performance of the system. Therefore, a channel board has been developed by previous thesis projects at Saab Bofors Dynamics. It uses a technique called Digital Radio Frequency Memory (DRFM). The purpose of this board is to sample and digitally store radio frequency signals in order to reconstruct them after a certain delay.The aim of this thesis project was to use the channel board named above to construct a portable instrument for generation of stimuli signals. This assignment has been divided into two tasks: firstly, to construct and put together the hardware components and secondly, to implement a graphical user interface for the instrument.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.