The characteristic of services as an effort carried out in a "moment of truth" implies a risk for failures. This study sheds new light on how alternative offerings that customers are initially exposed to can affect satisfaction and loyalty in the service failure and recovery context. More specifically, two aspects of the initial offering are studied: promised general service quality and the presence of a promise about a specific product attribute. Based on a presentation of the main theoretical perspectives, hypotheses are formulated and a scenario-based experiment in a hotel setting is designed to explore these. The results indicate that a higher level of promised service quality can result in more positive evaluations of satisfaction and stronger word-of-mouth intentions than for a lower level of promised service quality.

The aim of this thesis was to investigate the possibility of integrating an item tracking systemwith a monitoring system currently under development at Fifth Generation Technologies (P) Ltd.A literature study of RFID technology and the networks ZigBee and MiWi was done. Based onthe literature study a concept for a distributed system was developed.The concept is to have several RFID readers placed in the area where tracking is to be performedand allow them to communicate with each other through wireless communication. The RFIDreaders shall be able to form zones and filter the data that is forwarded from the zones to theservers and thus perform some of the work that the server would normally have to do. Theconcept has been evaluated by prototype development and testing. The prototype uses an ultrahigh frequency RFID reader and a MiWi network.The test indicated some limitations with the selected technologies.

This thesis is a feasibility study for a future product development project. The purpose ofthis project is to evaluate the possibilities and difficulties associated with the design of anelectric power assist servo for all terrain vehicles (ATVs). The project has been carriedout in collaboration with Nira Control AB. Nira designs and manufactures electric andelectro mechanic products mainly for the motor sport market segment.Nira Control AB is developing a fuel injection system for a new line of large ATVs oncommission. To be able to compete with manufacturers like Yamaha and Honda thecommissioner should be able to offer optional power assist steering.

This thesis focuses on the mass media cover of ?Smart textiles?. The Swedish?smart? textiles are developed in Borås and are a mix of ordinary textile and new technology.  I analyse the article with a text analysis method, looking at themes and the language?s propositions in focus. Context and the actors in the articles are also important in the analysis.Many women occur as developers of the new smart technical product, a field often knowed as a typical male subject.

Bachelor essay in political science by Marie Åberg, autumn 2011. ?Harm or benefit? A critical view of the theoretical grounds of the international development aid?. Supervisor: Professor Mats Lindberg. The first of the dual purpose of this essay is to present international aid policy ideas and the theoretical grounds of international development aid.

Many research reports mention the fact that a huge number of all system development projects never reach a successful ending; with other words never fulfil formulated goals. By identifying and forming success factors (and in some aspect risk factors) that the project manager in practice can use, this study may be seen as a step in the direction towards minimising the high number of failed system development projects. The purpose of this research report is to investigate how a system development project, where the development process is based on a specific development or process model (in this case the Waterfall model), can and should be driven. I aim to clarify what is demanded of a project leader for the specific development process and give an account for which eventual leadership qualities that can be well suited for given situation in relation to the need for technical competence. Among other things the project manager should inspire confidence, drive, be a decision maker, engage and own some form of basic knowledge in the field of system development.

Studies show that product placement is becoming a more and more common method for companies to use when communicating with consumers. The results of this study can?t confirm nor deny that claim, but instead we offered the observation that as a communication method, product placement and TV-commercials are more similar than revealed at first glance.Cars of the brand Ford appeared in seven out of the 50 motion pictures that made up the sample material in this study. In several instances the values that were communicated regarding the brand matched, completely or in large parts, the values communicated about the Ford brand in Ford?s own commercials.This doesn?t hold true for all companies.

Deposits can be formed in the paper machine due to sticky materials from wood and recycled paper. These deposits get stuck on process equipment and cause the product quality to deteriorate and the efficiency of the paper machine is reduced. The purpose of this thesis is to increase the understanding about deposits among machine operators, and to suggest methods that can be used to reduce the amount of deposits formed in Bravikens paper machines.To fulfill the purpose of the thesis a pre-study, a literature review and interviews with machine operators and production staff, were carried out. These methods led to the planning and creation of an education about deposits for machine operators.The education about deposits for machine operators consisted of an interactive lecture to introduce the subject of deposits and a subsequent discussion. This approach was chosen to give the machine operators the opportunity to discuss their work situation on the paper machines related to their new knowledge about deposits.

Näringsliv och offentlig sektor står inför ständiga utmaningar att förändra och effektivisera sin verksamhet. Idag ses information som en verklig produktionsfaktor och åtkomst till lämplig informationen ses som en nödvändighet för uppnå effektivitet och produktivitet i de individuella aktiviteterna (Oehlmann, Thoben & Weber, 1997). Med hjälp av elektroniska arbetsinstruktioner på produktionsgolvet har tillverkande industrier hittat en effektiv metod för att minska variationerna, öka kvaliteten, förbättra kommunikationen, minimera kostnaderna och snabbare få ut produkterna på marknaden, den s.k. Time-to-market (Coetzee, 2004).Syftet med denna uppsats är att undersöka om Informationslogistik genom införandet av elektroniska arbetsinstruktioner kan påverka effektiviteten och kvaliteten i ett företag vilket använder sig av elektroniska arbetsinstruktioner.En fallföretagsstudie har genomförts på HMS Industrial Networks AB, en världsledande leverantör av fältbuss-teknologi för automationsutrustning. De har utvecklat ett IT-system för att hantera elektroniska arbetsinstruktioner vilket de använder fullt ut i sin tillverkning.Mer praktiskt har uppsatsens arbete handlat om att undersöka hur de anställda upplever att det påverkat deras effektivitet i det dagliga arbetet, såväl som kvaliteten i arbetet, informationen och på produkterna.Intervjuer med användare från dokumentationsteamet och produktionsmedarbetarna har gjorts och resultatet visar att användandet av PRIS och elektroniska arbetsinstruktioner har gett en rad effekter i verksamheten, både för dem vilka administrerar och hanterar produktionsunderlagen såväl som för de berörda användarna på produktionsgolvet och i övriga delar i organisationen.Resultatet visar att Informationslogistik i allra högsta grad kan påverka effektiviteten och kvaliteten i ett företag.

Detta examensarbete omfattar produktutvecklingen av en komponent till en mätutrustning som ska mäta flytbarheten hos smält metall. Arbetet har utförts hos Bryne AB och har lett fram till koncept-, material- och tillverkningsförslag för komponenten. Arbetet har även utvärderat ett för gjuteribranschen nytt formmaterial som alternativ till dagens gjutsand. Tester har gjorts för att se om återvunnet (material x) går att använda som formmaterial till högtemperaturapplikationer..

This essay examines the persuasive side of music and its affect on consumer behavior when utilized in television commercials. It includes an interpretation of twelve study cases, in which three groups of four people is presented the same commercial, with different music being the only item dividing the groups. This is followed by a few questions about the product. The aim is then to see how the answers differ from one group to another, and how they match the music?s presupposed connotations suggested in the theory part of the essay, thus, observing the communicative, and eventually persuasive, power of music in television commercials.

 The purpose with this thesis was to develop a designguideline which will simplify the development of new products that will be laser welded. The need for this thesis has come forward from the quality problems that Volvo Construction Equipment, Components Division is having with their laser welding manufacturing unit. The reason for the problems emerges from the bad communication between the development unit and the manufacturing unit within the company when the products produced today was developed. This resulted in products that were hard to and in some cases almost impossible to weld. To avoid these problems from occurring again it was needed to gather the experiences within this area and compile it and present in a brief a pedagogical manner. The information for the groundwork of our results has been gathered by interviews of several key persons in Volvo Construction Equipment, Components Division.

Although English is commonly used in Swedish advertising, little is known about its effects. The purpose of this paper was to investigate how a Swedish or English language choice in product advertisements affects the effectiveness of the ad. Further, a local/global dimension of the advertisement was created to investigate how the results differ for local and global brands. Subsequently, an experiment was conducted where the effect of language choice on several well-established measures of ad effectiveness such as awareness, comprehension of the ad message, credibility, attitude and buying intentions was analyzed. In line with previous research, English in product advertisements is not completely comprehended since English is not the local language in Sweden.

Service Design is a relatively new, unexplored and exciting phenomenon that through an interdisciplinary work methodology designs services. A discussion has been going on for a long time regarding whether there is a difference between products and services. Services are often classified as immaterial, heterogeneous, non-storable and inseparable in relation to products. A question that arises is if something specific characterises the work methodology used regarding service design. The aim with this paper is thus to explain the work methodology when working with service design.

The purpose of this thesis is to analyze how the ongoing controversy surrounding the Internet, the phenomena of digitalization and file sharing will affect the music industry in the form of the ?big five? labels. Furthermore the thesis aims to present a recipe of strategies for the companies? survival by studying their situation through a theoretical perspective in conjunction with a comparative analysis with industries facing the digitalization challenge. The theoretical contribution lies in the strategic perspective at an industry level.