A large part of the Namibian low income population lack access to grid distributed electricity. This mean they are effectively shut out from basic functions such as lighting, information technologies and hygienic food handling. Hence, finding ways of providing affordable off-grid electricity is an important, not to say critical, task.This master thesis is an innovation and concept development project that has been carried out in cooperation with organisations in Sweden and Namibia. The purpose of the project has been to (1) develop a concept for off-grid electricity supply in Namibia and (2) to gain a deeper knowledge within the area of innovation and product development for the Base of the Pyramid population, i.e. the poorest, but largest, socio-economic part of the global population.Essential in this project has been to acquire user understanding and to identify user needs to create a foundation for developing the concept.

PURPOSE: To investigate to what extent product brand positioning models can be used to analyzecorporate brand positioning;METHODOLOGY: The phenomenon is observed from a positivist epistemological position within a primarilyinductive research design. The research strategy is defined as qualitative, while the method of ethnographiccontent analysis is implemented to analyze primary data;THEORETICAL PERSPECTIVE: Product and brand positioning literature; Product brand positioning rhombus;EMPIRICAL DATA: Ethnographic content analysis of brand commercials;CONCLUSION: As shown by the extensive literature review product brands (PB) and corporate brands (CB) coexistin corporate environments. One of key insights of this study shows that product brand positioning(PBP) and corporate brand positioning (CBP) processes can also co-exist in the same corporate environment.Moreover, PBs can be built based on the CB, making the investment in CB a long term return on investment.The study also observes that PBP messages include the ?against whom? attribute, highlighting differentiationin the competitive environment; when on the corporate level, this evolves, and in some cases becomes quitethe contrary, when the concept of ?from whom? or ?by whom? is stressed more than the differentiation amongother CBs in the competitive environment. This stresses the importance of including brand identity elementsin CBP..

The PhonePages of Sweden is a company that develops software for mobile units, especially cell phones. This thesis treats the development of, and contingencies for, a mobile phone directory, using the limited resources found in a mobile unit. The project was implemented and executed at The PhonePages with the intention of creating a product to sell to a third party.By studying different solutions, their benefits and drawbacks, an abstract picture of the product was constructed. Problems covered include compatibility problems caused by todays platform diversity as well as problems with saving, organizing and presenting data.The main goal was to create a phone directory which does not make external information retrievals. The service should contain both company and personal information, with name and phonenumber.

In today?s consumption society, the image and core values of a company have become more important in order to secure the attention on the market. All entrepreneurs have to distinguish themselves in the extremely tight competition.This thesis examines how product photos can reach out to the consumers successfully. Both students have previous experiences from model shoots ? but now want to study the possibilities to sell a product without a human model.The purpose of the thesis is to examine how to convey core values by commercial product photos - how to best capture the attention of a customer.

In Sweden there are 560 000 disabled people over the age of 16, half of those are in use of some kind of mobility device.Living with a disability means that due to injury or illness you are having trouble functioning without devices or assistance in your daily life and has a big impact on the independence of the disabled user.The everyday life for disabled parents with young children are different depending on the type of disability and mobility device.Today there is no alternative to the stroller for the disabled user who use mobility advises. This causes problems when the disabled person on there own have/want to move the child.The following statement have been the cornerstone for this project: How to make it possible for a wheelchair user to move a child, in the 0-2 year, for longer distances with a focus on independence and safety for both adult children?Due the process, of industrial design, this question and problem have been solved during 10 weeks. The process have contained parts as meeting with users, analyzing, concept development, evaluations, mock-up making, testing, shape & color development etc. This in the end have resulted in a full scale model of the appearance of a proposed product.The result is a stroller witch can be connected to the users specific wheelchair due two one time adjustments.

Ocean Modules Sweden AB is a small business active in the field of underwater technology. Thecompany was contacted by the Swedish Defense Materiel Administration (FMV) in order todevelop a new system that would conform to their specific requirements. Two students at theRoyal Institute of Technology (KTH) were consulted in conjunction of this project in order to aidthe development and conceptual design of the system.The primary users of the system are the divers of the Explosive Ordnance Disposal division (EOD)- a branch of the Swedish Armed Forces. The purpose of the product was to incorporate allnecessary functions required by the EOD divers into one single system. The main functions arecommunication between the surface operator and diver, video recording, still imaging, positioning,navigation and ocean floor mapping with sonar.

HemoCue AB is a multinational corporation targeted on manufacturing point-of-care analysisinstruments for medical treatment. Their main product, the DM 201, is outdated and has bigissues gaining new market shares. For example, no medical treatment center in Sweden usesDM 201 frequently. The project of developing a new instrument to replace it was assignedtwo students at the development engineering program at Halmstad University. The projectalso included integration of the new platform for DM 202 to HemoCue AB:s remainingproducts.The project began by defining the different technical areas concerned.

This paper investigates the internal product costing system in one of the Swedish banks with the purpose to evaluate the quality of its product costs and possible implications on decision making. The study shows that the current system distorts product costs by, among other things, using relative allocation of costs and time and by allocating all costs to individual units of products. We therefore propose an alternative product costing system, which mainly draws on ABC theory but is also adapted to the specific needs of service companies and of the Bank. This proposal is intended as a solution in this particular case and not to be generalized in other contexts. We hope however to add to the understanding of why more complex costing systems, such as the ones based on ABC theory are, according to previous studies, not widely used in practice.

We have a business proposal. Instead of the consumers visit the country side in order to purshase we are interested in starting a shop with only regional produced products in the city. We have our base in a part of Sweden called Östergötland, therefore we have investigated the market for such a store in Östergötlands biggest city, called Linköping. The conclusion is that the store must sell food produced in the region. Another conlusion is that the store must be located near a bigger supermarket. Our main selling points are quality and that the food is produced in the near region.

Edsbyverken Office Furniture has over the past 100 years been producing delicate carpentry products, chairs and skiis, but more recently the focus has shifted to furniture for the modern office environment. With a wide selection of products and its characteristic neutral design, Edsbyverken has an extensive group of clients both in Sweden and internationally. The aim of my C level thesis project was to examine the materials Edsbyverken is currently using in order to develop new designs or product functions. Simultanesously, I also wanted to verify whether the method I developed for this project - to initially undertake a comprehensive study of the chosen materials and thereafter specialise on a certain product and target audience ? was effective and successful.

Consumer involvement in the product development process, co-creation, is being practiced by numerous companies. Previous research has investigated how consumer participation in co-creation affects consumer attitude. However, little is known about how co-creation affects the attitudes of the observervers of co-creation. The effect of observed co-creation on consumer attitude should be important when deciding whether to apply co-creation or not, as the observing consumers make up a larger part of the consumer collective than the participating consumers do. The paper at hand aims to investigate how observed co-creation affects consumer attitude and purchase intentions.

This examination paper concerns how a organization can reach right quality. In this case the focus is on the communication of the soft product quality within an organization to achieve right quality. To fulfill the aim of this study a case company has been used to be able to show the absence in the topic. The questions of the study are: How have the customer?s needs been communicated within the organization? What absences are there today concerning the communication of the customer?s needs within the organization? How can the communication of the customer?s needs within the organization improve?The aim of this study is to describe and analyse how the transmitting of the customer?s needs concerning soft product quality is made today in the case company and to reach any improving suggestions.

The purpose of this master thesis is to present a model that illuminates the important factors when deriving technical information from market data within a company. For companies to be able to become and stay competitive in the market, product quality is an important factor. Whilst good product quality leads to customer satisfaction and loyalty, lack of quality brings costs in service and replacements. To improve product quality, the developers need information and knowledge about what quality issues affect existing products. Most companies gather data from market about known issues, but in order eliminate known quality issues in new products; this data has to be transformed into information and knowledge.

An increasing global tourism offers great opportunities for Sweden as a tourist destination. However, an attractive destination requires competitive destination marketing strategies. Tourist destinations often include a complex network of stakeholders of small and large en-terprises that represent both the public and private sector. One condition for successful des-tination marketing is that all of these stakeholders collaborate in their marketing to create an integrated and powerful image. Another important aspect in terms of increasing the des-tinations competitiveness is that the local tourist companies are "export-oriented", in order to ensure that international tourists are looked after appropriately.This study has focused on the destination marketing of Stockholm.

Green public procurement (GPP) can be used as an instrument to reduce carbon dioxide emissions, and consideration of environmental aspects within public procurement is becoming more common in Sweden and internationally. Two product groups that have been pointed out as especially important are transports and electricity, where the opportunities for public purchasers to reduce emissions are relatively large. This paper studies GPP which aims at reducing emissions, primarily of carbon dioxide, through environmental requirements within these two product groups. A theoretical analysis of cost-effectiveness, transaction costs and effects on technological development is performed, followed by a closer study of how these aspects appear in practice within GPP. The results indicate that a cost-effective allocation of reductions between the two product groups is most likely to be attained if the main part of emission reduction is achieved through environmental requirements on electricity. The cost for emission reduction within transports is relatively high, especially for heavy transports. For transportation services, more generally focused requirements on emission reductions could probably give greater environmental gains, but the existence of transaction costs steer the environmental requirements towards more technology specific types.