Transportation of pigs might be a welfare problem. Stress during and after transportation can negatively affect the meat quality or cause carcass damages, which leads to major economic losses every year. The transportation chain can be divided into several stages; loading, transport and Unloading. This literature review focuses on Unloading of pigs from a transport. When arriving at an abattoir pigs can be fatigued and need to be as smoothly unloaded as possible.

The study concerns the Unloading of pigs at the slaughter house, both from the pigs view and from the transporters view. The study has been carried out at the slaughter house (SLP) in Helsingborg, Sweden. It includes a questionnaire to all transporters (65 % response) and a direct observation of the Unloading. The transporters handling of the pigs, their use of different equipment and the response of the pigs has been studied. The pigs behaviour at Unloading and their reactions to environmental factors has also been studied.

Transportation of pigs might be a welfare problem. Stress during and after transportation can negatively affect the meat quality or cause carcass damages, which leads to major economic losses every year. The transportation chain can be divided into several stages; loading, transport and Unloading. This literature review focuses on Unloading of pigs from a transport. When arriving at an abattoir pigs can be fatigued and need to be as smoothly unloaded as possible.

During the last few years the harwarder has developed from a prototype into a market product. Holmen Skog owns two harwarders and uses two more owned by entrepreneurs. In previous studies it has been shown that the harwarder was a slow and expensive forwarder. In this study the Unloading at road-site was studied. The goal was to describe the differences in time consumption between Unloading two-sided or single-sided (only from side of the road) and also the difference between Unloading with three and four assortments in the carrier.

This Master thesis was written for Lantmännen Agroetanol in Norrköping concerning the layout of their finished goods inventory and Unloading of feed after introducing a new product mix. Lantmännen Agroetanol has two production lines which produces feed. Both lines lead to six silos, used as inventory of finished goods. The feed from the two production lines differ in terms of quality, where as Lantmännen Agroetanol wants to separate their finished inventory in order to charge a higher price, by selling the better product as a premium. With two different feed products the yearly revenue is expected to increase which motivates a research about the current capabilities and necessary changes to be made in the factory.

This Master thesis was written for Lantmännen Agroetanol in Norrköping concerning the layout of their finished goods inventory and Unloading of feed after introducing a new product mix. Lantmännen Agroetanol has two production lines which produces feed. Both lines lead to six silos, used as inventory of finished goods. The feed from the two production lines differ in terms of quality, where as Lantmännen Agroetanol wants to separate their finished inventory in order to charge a higher price, by selling the better product as a premium. With two different feed products the yearly revenue is expected to increase which motivates a research about the current capabilities and necessary changes to be made in the factory.

When building large buildings, such as compartment buildings, there is a number of deliveries arriving on the construction site daily. In order to receive these deliveries without disturbing the rest of the work going on JM often books a fixed Unloading time. When doing that they can be prepared when the delivery arrives. Making sure there is a suitable Unloading area, someone to meet the delivery and when needed proper machines, such as a tractor or a crane, to help unload bigger deliveries. The person receiving the delivery is supposed to make an acceptance control where they check the delivered goods making sure nothing has been damaged in transport and that they have received what they were supposed to receive.

This thesis has been carried out within the bachelor program for mechanical engineering at Karlstad University in collaboration with BAE Systems in Karlskoga. The purpose with this work was to design a mechanism and associated parts for loading and Unloading of shots between primary and secondary magazine in BAE's new 40mm's ship gun.Parts designed or redesigned among other things a transfer mechanism for shot at loading and Unloading, well as a hatch mechanism which makes the shots do not fall out of the primary magazine when making separate use. Various important details have been designed to maintain a good functionality of the mechanism.The construction work has mainly been carried out in the CAD software Solid Edge and its associated FEM module. The construction work has also been carried out on rough calculations for constructed details in order to ensure that they meet the stringent requirements of military use in tough marine environment. Two of the most critical parts of the structure where analyzed with the FEM module for estimating the stresses in the material at the applied load.The final design, which is a result of the thesis, meets the requirement specification and the set targets.

This thesis has been carried out within the bachelor program for mechanical engineering at Karlstad University in collaboration with BAE Systems in Karlskoga. The purpose with this work was to design a mechanism and associated parts for loading and Unloading of shots between primary and secondary magazine in BAE's new 40mm's ship gun.Parts designed or redesigned among other things a transfer mechanism for shot at loading and Unloading, well as a hatch mechanism which makes the shots do not fall out of the primary magazine when making separate use. Various important details have been designed to maintain a good functionality of the mechanism.The construction work has mainly been carried out in the CAD software Solid Edge and its associated FEM module. The construction work has also been carried out on rough calculations for constructed details in order to ensure that they meet the stringent requirements of military use in tough marine environment. Two of the most critical parts of the structure where analyzed with the FEM module for estimating the stresses in the material at the applied load.The final design, which is a result of the thesis, meets the requirement specification and the set targets.

Today, pigs are moved on farm, between farms, between countries and to abattoirs. This movement of live pigs requires handling practices that are designed for the purpose. The objective of this study was to research the use of paddle in moving pigs, to investigate if there were different methods of paddle practice, explore the time efficiency of different kinds of paddle use and if there were any time variations in methods that varied in intensity of touch. This study was done on two Swedish abattoirs for a total of five weeks. A total of 22 transporters working at two different abattoirs where studied during Unloading of pigs at the abattoirs.

The construction industry develops at a high pace today. Because of this the construction companies has to rethink and try to develop at the same pace. One of the biggest challenges in the construction industry today is to improve the logistics since improved logistics leads to lower costs. This is something that the construction companies have started to realize and they are beginning to invest more money in order to improve the logistics. It is especially important to have good logistics when the conjuncture turns for the worse.

The report aims to describe the austenitic stainless steel Sanicro 25 from a thermomechanical point of view. The thermal and mechanical properties of the material make it suitable for use in coal ? and thermal power plants. By the use of Sanicro 25 it would be possible to bring the efficiency of these plants up while bringing the carbon emissions down.A material model is created from material testing and validated through simulation in the finite element software Abaqus. The model that has been derived describes the material behavior during loading and stress relaxation for the first cycle in a thermomechanical fatigue test well.

The aim with this literature review is to describe the ensilage process in a bunker silo. The process from harvest and chopping to filling and Unloading the silo is explained. The sealing of the bunker silo plays an important role for the final quality of the silage. This review covers some of the techniques used. There are many silage additives on the market, some of them are presented including how they act in the ensilage process.

Dagens låga lagervolymer vid industrierna har inneburit högre krav på transportstyrningen av ankommande virke för att säkerhetsställa en kontinuerlig råvaruförsörjning. Kombinatet i Iggesund, som är en del av Holmen AB, har sett potential att effektivisera sin vedhantering vid det massabruk samt sågverk som utgör kombinatet. Vedhanteringen är idag tydligt separerad mellan massabruk och såg. Studiens syfte var att kvantifiera effekten av ett samarbete med vedhanteringen mellan massabruk och såg samt en förändring i lossningsresurser med avseende på relativa kötider för virkesfordon som ankommer till kombinatet. Med händelsestyrd simulering skapades en modell över kombinatet.

The goal has been to design a product for Unloading and storing small gadgetsin the hallway. The aim has been to facilitate the search for importantsmall objects that people never seem to find when they need them the most.The aim has also been to provide a sense of relief when people enter theirhome, and they can empty their pockets on one spot in a very simple yet orderlymanner. The product would be able to sort out, and make the gadgetsaccessible, take as little space as possible, be easy to use and not be perceivedas heavy and clumsy. The work has been done with close involvement of afocus group consisting of 20 people of different ages and with different occupations.The behavior of the focus group has been observed and test modelshave played a crucial role in advancing the work troughout the project. Theresult is a series of storage products for the wall, of simple shapes which canbe combined together in different ways depending on hallway and the user?sindividual taste or preference..