Volvo Human Monitoring (VHM) is an ongoing project at Volvo Cars where they measure, amongst other parameters, inhalation and exhalation through a device called Respiratory Inductance Plethysmograph (RIP), on drivers. RIP measures changes in the cross-sectional area of the chest and abdomen. When the driver is in motion, such as when she is turning the vehicle, the cross-sectional area changes and noise in the RIP signal may arise.The noise results in a large number of manual adjustments in the analysis of the RIP signal, which is very time consuming and the validity of the device for measuring inhalation and exhalation is questioned.The purpose of this study was to improve the efficiency of the analysis of the RIP signal. The goal was to create a new data processing tool in Matlab that automatically detects inhalation and exhalation from a RIP signal with higher validity compared to the previous data processing tool.In this study, nine tests were performed on drivers while they were driving in different scenarios such as highway, country road and in city traffic. Inhalation and exhalation was measured using a RIP, a pneumotachograph with a tightly sealed facemask and a Thermocouple placed between the nose and mouth, which was used as reference to the RIP.The result of this study was a data processing tool that automatically detects inhalation and exhalation with higher validity compared to the previous data processing tool.

Volvo Human Monitoring (VHM) is an ongoing project at Volvo Cars where they measure, amongst other parameters, inhalation and exhalation through a device called Respiratory Inductance Plethysmograph (RIP), on drivers. RIP measures changes in the cross-sectional area of the chest and abdomen. When the driver is in motion, such as when she is turning the vehicle, the cross-sectional area changes and noise in the RIP signal may arise.The noise results in a large number of manual adjustments in the analysis of the RIP signal, which is very time consuming and the validity of the device for measuring inhalation and exhalation is questioned.The purpose of this study was to improve the efficiency of the analysis of the RIP signal. The goal was to create a new data processing tool in Matlab that automatically detects inhalation and exhalation from a RIP signal with higher validity compared to the previous data processing tool.In this study, nine tests were performed on drivers while they were driving in different scenarios such as highway, country road and in city traffic. Inhalation and exhalation was measured using a RIP, a pneumotachograph with a tightly sealed facemask and a Thermocouple placed between the nose and mouth, which was used as reference to the RIP.The result of this study was a data processing tool that automatically detects inhalation and exhalation with higher validity compared to the previous data processing tool.

The report handles the transmission of signals from piezoresistive pressuresensors and Thermocouple from a rotating object. This report also evaluates the possibility to collect data in a datalogger that rotates with the object. Telemetrics was previously used for signaltransmission in Finspång, therefore there has been no tests considering preassure measuring. One transmitting method handled in this report is transmission through a slipring connection. One test with a slipring connection was performed for transmitting signals from a piezoresistive preassuresensor.

This report describes the construction of a climate-cabinet for testing of HV-cards (High Voltage) produced at VG Scienta. The main part of the report describes all the different components of the cabinet. The most important parts are a PID regulator from Eurotherm model 2408, a solid state contactor (SSC), a Thermocouple, a finned resistor from DBK and different fans. The report even includes the connection between components by cable wiring, isolation, grounding, fuses and shaping of metal goods.As the cabinet also communicates with a computer, the report includes the solution of the data communication using the software iTools from Eurotherm. The communication part includes information about a converter that converts EIA422 to USB.The cabinet was produced at a company, called VG Scienta, in Uppsala during the spring 2010.

Luossavaara-Kiirunavaara Aktiebolag (LKAB) är en gruvdriftskoncern med järnmalmsbrytning som huvudsaklig verksamhet. En av produkterna tas fram genom att raffinera järnmalm till pellets vilket är en efterfrågad produkt vid ståltillverkning. Vid sintring av råkulor till pellets är temperaturen väsentlig för att få så hög oxidation som möjligt av magnetit till hematit och för att få rätt fasthet. För att reglera värmen bör temperaturen mätas bland råkulorna eftersom det är kulornas temperatur som är det viktiga.                                 Projektet går ut på att undersöka möjligheterna att mäta temperatur bland råkulor på gratevagnar som åker genom en pelletsugn med ett permanent mätsystem. Här ställs höga krav på mätsystemet på grund av miljö, portabilitet och drifttid.Miljöanalyser gjordes för att ta reda på vilken påfrestning ett mätsystem bör klara av. Förslag om placering av mätutrustning framtogs genom kartläggning av miljön.