The goal of this master thesis project was to develop computer models of some plausiblePretreatment techniques and to assess the potential benefits/costs of using Pretreatment andanaerobic digestion for waste management of organic waste from a system perspective. Forthis purpose a computer program called ORWARE has been used. ORWARE (organic wasteresearch) is a program for making life cycle assessments of waste management. As the mainpart of the project work the ORWARE system has been provided with three new models ofPretreatment techniques. The additions consist of: One model of Pretreatment with ultrasound,one model of thermal hydrolysis and one model of a screw press.

Increased understanding of the mechanisms that operate in conjunction with the welding of metal surfaces may help to improve existing manufacturing processes, and to enable new products and combinations of materials. The purpose of the project has therefore been to acquire a deeper understanding of what is happening in the bond for steel and for the factors that form the basis for a bond to develop between metals in the production of laminates by pressing. The merge has been done by pressing and the surfaces after the experiments have been studied in detail in the scanning electron microscope (SEM), energy dispersive X-ray spectroscopy (EDX) and with interferenceprofilometry in Wyko, to provide a greater understanding of the mechanisms that influence the bonding in the interface between metals. The project was limited to contain the materials Docol 1000, HyTens 1200, Aluminum AA3003 and a commercial steel. The parameters varied in the experiments to study their influence closer are temperature, pressure, heat treatment and Pretreatment. This has been implemented by pressing with varying temperature and pressure.

The purpose of this thesis was to make an energy survey and quantify energy flows of individual unit operations associated with the biogas production in Uppsala Vatten och Avfall AB:s biogas plant, located at Kungsängens gård. Moreover, large consumers of energy would be identified and analyzed. The objective of this energy survey was to obtain a detailed understanding of the energy use in the biogas production. The energy survey was divided into two parts: electricity and heat. Each part was treated separately and with somewhat different approach. To estimate the electricity usage during the projcet the rated power of each selected unit operation was noted and multplied with the measured time of usage.

The purpose of this thesis was to make an energy survey and quantify energy flows of individual unit operations associated with the biogas production in Uppsala Vatten och Avfall AB:s biogas plant, located at Kungsängens gård. Moreover, large consumers of energy would be identified and analyzed. The objective of this energy survey was to obtain a detailed understanding of the energy use in the biogas production.The energy survey was divided into two parts: electricity and heat. Each part was treated separately and with somewhat different approach. To estimate the electricity usage during the projcet the rated power of each selected unit operation was noted and multplied with thenmeasured time of usage.

Biogas is increasingly used for fuel in for example vehicles and it´s produced in a biogas processconsisting of the steps of Pretreatment, digestion and gas cleaning. The Pretreatment is a method usedto increase the gas production and / or destroy pathogens. The digestion is the stage when anaerobicmicroorganisms convert bio-mass of a substrate to a raw gas containing about 65% of methane. Thegas cleaning is used to increase the methane content to about 97% so the gas can be used for motors invehicles. The biogas part of the Ekeby sewage plant in Eskilstuna is using multiple substrates.

Ethanol for automotive purposes is an issue much debated and researchers disagree about the benefits of bioethanol. Converting energy-rich crops into ethanol suitable as motor fuel is a complex process and continuous development and improvements of processes and material used are important steps in the work of developing environmental friendly fuels. Grain is usually preserved by drying which consumes a lot of energy. Alternative storage of high-moisture grain in airtight storage systems reduce the energy required to produce bioethanol and studies have also shown that ethanol yields are increased more than 10% in ethanol fermentations of moist grain compared to dry. Airtight storage is often not perfectly airtight so biocontrol agents are necessary in order to preserve the grain.

Avloppsreningsverket Sundet i Växjö har en rötningsanläggning som producerar biogas. Anläggningen består idag av två rötkammare och en maskin för avvattning som substratet går igenom efter rötningen. Substratet som används i rötningsprocessen är avloppsslam från Växjö. Planer finns på att utöka processen med en tredje reaktor i vilken det rötade slammet ska återrötas. Detta för att få ut mer biogas ur slammet.

In order to avoid harmful substances ending up at the municipal sewage treatment plants, it is important to purify the wastewater at the source. One such source is the wheel washers available in many tire garages which are used to wash the wheels on our vehicles when we change between summer and winter tires. It is important to wash the wheels before storage, to extend the tires lifetime. The purpose of this study is to find a green innovative solution for reduction of emissions of heavy metals at the source, so that the sludge from the sewage treatment plants can be used as fertilizer. The target is to find a wheel wash method which leads to compliance with the guidelines for car washers, and that also provides a better washing result than with the existing method.

Bioethanol is one alternative energy fuel that can be produced from different types of biomass. Second generation bioethanol comes from fermentation of lignocellulosic material and can be seen as a more environmental friendly alternative as e.g. forest residues and agricultural by-products are used. To be able to use lignocellulosic biomass in ethanol production, it has to be subjected to different treatments first. In this study, aspen sawdust was used as lignocellulosic material.

Today's society is facing major challenges. In order to reduce the climate impact fossil fuels should be replaced with fuels that do not contribute to the greenhouse effect. The growing population generates organic waste originating from industry and households so called organic fraction of municipal solid waste (OFMSW). Through anaerobic digestion, waste can be utilized to produce energy-rich methane gas. In this way, waste can be a resource instead of a burden on society.

Emissions of insufficiently treated wastewater, mainly blackwater (i.e. wastewater from toilets), contributes to the eutrophication of lakes and seas. At the same time, blackwater is a fraction with a low content of heavy metals and, after sanitization, it can recirculate plant nutrients to arable land using the liquid composting treatment method. Liquid composting means that organic material is degraded under aerobic conditions. For sanitization, the blackwater needs to be treated together with energy-rich complementary material.

Until 2020, 49% of Sweden's use of energy must derive from renewable sources. Greenhouse gases must as well decline with 40% compared to 1990 as a part of Sweden's 16 environmental objectives. Biogas is part of the effort to achieve these objectives, but as the demand for biogas increases, more substrates are needed to meet the demand. The purpose is to investigate the conditions for pea residue as substrate by performing lab-scale mesophilic digestion with different fractions and notch lengths and then to summarize pea residue as a substrate for biogas production. During anaerobic digestion, 1000 ml bottles were used as reactors for digestion.

Vid tillverkning av massa och papper förorenas årligen 505 miljoner kubikmeter vatten som måste renas innan det släpps tillbaka till omgivningen. Vid reningen avskiljs först stora partiklar som sedan avvattnas och förbränns. Vattnet som blir kvar genomgår ytterligare en rening, varvid det bildas bioslam. Bioslammet innehåller mycket intracellulärt vatten, vilket gör det kostsamt och energikrävande att avvattna. Det är även sedan 2005 förbjudet att dumpa organiskt material, varför en mer ekonomiskt attraktiv behandling av slammet är anaerob nedbrytning.