The Kverneland Ecomat and The Ecomat Seeder has been tested in three different field studies. All the studies were conducted on soils with different clay content during 2005 in Säby outside Uppsala. In one of the trial spring Ploughing with the Ecomat and spring Ploughing and seeding with Ecomat Seeder were compared with conventional autumn mouldboard Ploughing and spring mouldboard Ploughing to conventional depth (22-23 cm). In this study the quality of the seedbed, the number of emerged plants and weeds, the pentration resistance and the yield were examined. Shallow spring Ploughing (10 cm) with the Kverneland Ecomat has shown to be a good alternative to conventional autumn Ploughing when growing spring crops. During the season 2005 tilling with the Ecomat resulted in a higher yield than conventional Ploughing. In 2002-2005 the average yield for shallow spring Ploughing was 4 percent higher than after conventional autumn mouldboard Ploughing and 10 percent higher than after spring mouldboard Ploughing to conventional depth (22-23 cm). In the other two studies, Ploughing to different depth in the autumn with the Ecomat was compared with conventional mouldboard Ploughing and stubble discing.

The payment for produced grain is constantly going down in price. It is important for farmers to become more effective in cultivating more land in a shorter time perspective. At the same time we have to calculate with the risk of getting lowered subsidies from the EU. This is why I would like to find out the possibilities for establishing winter wheat without Ploughing. I hope to find a difference in the number of plants due to different soil preparations. With this experiment I expect to find out whether I can establish winter wheat at a lower cost, with the same numbers of plants per square meter.

In Sweden, reduced tillage usually means non-inversion tillage, where primary tillage is carried out using chisel ploughs or disc implements. Primary tillage method is mainly determined by the desired soil loosening and the handling of soil residues. The effect of tillage depth was studied in field experiments in Skåne, Väderstad, Uppsala, Örebro och Västerås in different crops; spring oilseed rape, spring wheat, winter wheat and spring barley.The experiments generally had a randomized block design with the treatments mouldboard Ploughing, deep chisel Ploughing and shallow chisel Ploughing, in some cases also shallow discing and no-tillage. In the experiments the following parameters were determined: seedbed properties, saturated hydraulic conductivity, penetration resistance, number of emerged plants and crop yield (all parameters were not determined in all experiments. Root growth and draught requirement were determined in two separate studies. There were no significant differences between tillage depths in non-inversion tillage in seedbed properties, plant emergence or root development.

During the last couple of years it has been more important to reduce the driving on the field to prepair the soil after Ploughing. The machine costs are high so it is necessary to be effective. To reach a pleasant soilbed directly after Ploughing is sometimes possible on easier soils but heavier clay soils always need more tillages. There is a lot of equipment mounted on the ploughs on the market, for example Furrow Cracker and Furrow presses, which makes a pleasant soilbed on easier soils. The last year Överum and Kverneland have presented knives which are mounted on the wing or moulboard.

A field experiment was carried out in 2006 to investigate the effects of deep rotary cultivation on sugarbeet growth. The background to the experiment was a 2005 study showing potentially higher yield, higher cleanness and higher sugar content when primary tillage was carried out to 35 cm depth with a rotary cultivator. On four field sites in Skåne (L:a Isie, Ädelholm, Stävie and Vragerup), five different treatments were compared: mouldboard Ploughing in the autumn to 20 cm; mouldboard Ploughing in the autumn to 20 cm + rotary cultivation in the spring to 35 cm; rotary cultivation in the autumn to 35 cm; rotary cultivation in the spring to 35 cm; and mouldboard Ploughing in the spring to 20 cm. The rotary cultivator used in the treatments is manufactured by a Dutch company, Imants. The implement cultivates the soil with spade tines fitted on arms that are mounted on a horizontal rotating PTO-driven axle. Beet plants were inspected and yield determined in the experiment, and three soil parameters were examined: penetration resistance, water infiltration and infiltration of blue dye. Root shape was also examined. The site at Stävie was not harvested due to poor beet establishment. At the other sites, the highest yield was found when the soil was rotary-cultivated in the autumn.

The object with this thesis is to evaluate which of the catch crops oil radish and white mustard in combination with establishment method, give the most effective nitrogen uptake. The main purpose of the catch crops is to reduce leakage of nitrogen. They are sown after the main crop and killed before the next crop. In Sweden the farmers gets subsidies to establish catch crops. The thesis is limited to the trail L3-9010 sited at HS- Malmöhus, Borgeby Gård, 237 91 Bjärred, Sweden, 2007. Only treatments with oil radish, white mustard and the reference treatments were studied.

Optimization of soil tillage and crop rotation is important in many aspects, but particularly in maximizing profit margins. Since the economic outcome is usually decisive, it can be interesting to study different combinations of soil tillage systems and crop rotations in order to identify the maximum economic outcome. How a crop functions in a particular tillage system determines whether it is profitable to grow that crop. Different tillage systems affect the soil and its processes in different ways. Reduced tillage often works best on weak-structured heavy clays and on silty clays.

To investigate the possibilities for effective soil tillage, that could imply lower costs, lower negative environmental impact and in addition a meaningful occupation for foraging pigs, a field experiment was carried out in Gränna, Småland, during growing season 2006. The experiment contained two treatments that were repeated three times and were carried out on a couch grass-infected fallow on a light soil close to Sweden?s second largest lake, Vättern. Ploughing was one treatment and pig rooting followed by Ploughing, was the other. The experiment was conducted according to the guidelines of organic growing and seedbed preparation was done the same way in the two treatments. The pigs, three groups of five half-year old Linderödssvin (an old Swedish breed), was encouraged to perform an even tillage by strip-grazing, i.e.

A growing problem in Swedish herbicide free agriculture, the Canadian thistle has been the object of several new trials, seeking methods for non-chemical weed control. The new trials have mainly confirmed earlier experiences; that the most successful methods of control are springtime Ploughing, repeated cutting and competition from a stout crop. Row hoeing has also been proven effective. As opposed to earlier recommendations, half season fallow has shown to be a risky and often ineffective method of control. Trials regarding biological methods have shown that above others thistle rust (Puccinia punctiformis) may have the potential of controlling Canadian thistle the future. .

This is a study made because I would like to see how much money can be saved when reduced soil preparations is used. This is a case study, the farm is located in the north vest part of Skåne, Sweden. I have calculated with four different soilpreparation methods. Alternative 1: Conventional soil preparation, the way the farm is managed today. Alternative 2: Ploughing on depth of 12 centimeters, with a ridge packer followed with sowing. Alternative 3: Eco-tillage Alternative 4: Direct drilling The results of my study showes that Alternative 2 is the most profitable. Alternative 4 is very good if you see to dieselexpenses and hours of work, but the yield is far to low. If the numbers are further analized, it showes that in spring barley the differense between Alternative 2 and Alternative 4 is at a minimum. So if there is lack of time for one reason or another, this might be an alternative in spring barley. The differense in how the farm is managed today and the most profitable alternative in the study, Alternative 2 showes that it can be saved up to 60 940 SEK..

Today it is common to spray against most weeds by using very expensive weed-killers. The goal for every farmer is to have as low costs as possible for their use of machines and weed-killers. Therefore it is in everyones interest to find other methods to fight the weeds. Finding a way to reduce the rise and growth of weeds already at the preparation of the soil would lower the number of laps over the field and also decrease the amount of weed-killing dose. Tests show that by harrow in the dark it is possible to reduce the population of weeds with up to 60%, but the normal reduction would be about 20-30%. To verify the results above we made tests by using two different methods of preparing the soil. We tested Ploughing and harrowing in daylight and during night. Later we checked the number of different weeds in areas prepared in daylight and during night. By studying the results from the different methods used we found a considerable reduction of some kinds of weeds in areas prepared during night..

Reduced tillage has increased in Sweden during several years, primarily to decrease costs andincrease efficiency in crop production. Despite this, mouldboard Ploughing is still the mostcommon primary tillage method on most farms. The aim with this thesis was to compare theuse of pesticides and the occurrence of weeds on ten farms in Skåne and ten farms inMälardalen that use different soil tillage systems. The object of the study was also to clarifywhy the farms had chosen their specific soil tillage system and the consequences it has had onweed occurrence and use of pesticides. The result showed a slightly higher use of pesticideson the farms that use reduced tillage.

The margin in crop production is more and more less and it forces the producer to check out how to reduce the cost of establishment of new crop. One way to reduce the cost in establishment is to begin with plough less farming. It saves money and time compares to conventional soil preparation with plough and harrow. Not all soil types are god for plough less farming and should be continued with Ploughing (mainly light soil), but other soil types working very well with plough free farming. If you want to success with plough less farming you have to think in new lanes. One of the things you have to think about is to not grow too much cereal after cereal. Low stubble is important when you harvest the crop and also to spread and chop the straw well. I have in this work interviewed some farmers and farm advisers in Östergötland to see which thoughts they have about plough less farming.

The production of oilseed rape is an important issue in Sweden and those who never have grown oilseed rape (OSR) are now willing to try. It is always a risk to grow oilseed rape, specially winter OSR, because of outwintering. This risk increases as you go north and therefore establishment and autumn growth is very important. These are some of the reasons that I have chosen to write about the establishment of winter oilseed rape in Middle Sweden. There are many factors that influence the outcome of the establishment, e. g.

Tussilago farfara, coltsfoot, is a troublesome perennial weed with deep lying rhizome, which can vegetatively generate new plants. The mechanical control of coltsfoot that is used today, "starvation", which consists of several cultivations of the soil, which fragmentises the rhizome. This results in production of new shoots, which leads to depletion of nutrient resources; as long the new plant is not allowed to establish. However, very little research has been done to investigate how the starving technique affects the regenerative ability of coltsfoot. The purpose of this experiment with coltsfoot was to investigate how fragmentation and burial depths affect the time of emergence, number of emerged shoots per rhizome fragment, number of shoots per node, and if the germination ability within nodes changes during the experiment.