The aim is to design a Module for living which is flexible in a bigger context, which could condens the city and to answer the questions: How is it possible to make a livingModule where the compact living theme works in an everyday situation? How is it possible to make one Module which is able to function in several different situations? The process in solving problem has been characterized of trial and error: design a Module and learn from the mistakes and take the knowledge to the next Module. This is the way I have worked until I found a good solution. As a result I can show an efficient Module which has several nice values of space and that is flexible and to some part adjust for a disabled person. It can on several ways condens the city.

This master thesis describes the development of an UPS Module. UPS is an acronym for Uninterruptable Power Supply. The UPS Module has been developed at the company AerotechTelub AB. The UPS Module delivers the necessary voltage and current in case of a power interrupt. If a power interrupt occur, the computer system has one to three minutes available to store data and shut down correctly.

This report shows methods and workflow when exploring the potential to change Outotecs HCD Silver Electrolysis machine to a Module type. It?s done as an attempt to lower the workshop and installation costs and to give customer a more accurate prize directly. To do this a concept was produced which was set to a stress test. Additional objectives were to investigate freight and installation procedures, pneumatic connections and to calculate the difference in cost.Once the concept, a reinforced type of the original frame, was chosen stress tests in computer simulations were made and appropriate alterations were made.

In cooperation with the Gislaved company Lerocon AB [1], a separation Module wasdesigned as a further supplement to the Module System. The aim of theprojectimplementation was that the separation Module could be flexible enough to feed themetal pieces, screws, nuts and other items with large variations of size, appearance andmaterial composition. The Module should also be cost effective to manufacture.A separation Module is a design which is ment to streamline the work in industries withautomation of the lineoperations. The Module feeds the details such as screws, nuts, washersand pieces of metal in a continuous flow in which traps separate the details from each other.Traps may vary depending on the purpose and of the details that are fed. Perhaps it isimportant for the user that the detail-orientation is right after the separation Module, whichmeans that all the pieces witch aren´t are fed back in return.For companies and industries in lineoperations that can be made more efficient withautomation, are production flow an important watchword.

This report describes the scientific work of designing and manufacturing an intelligent controller Module prototype for automobile trailer connections. The functions of the Module are both to drive the lamps and detect failures. The Module also contains functions to handle other functions of the trailer. To learn about controller Modules the group does extensive feasibility study.The group receives three already existing Modules, the functions of the three Modules are studied and tested in the lab, this is done too get a overview of the construction. The method used I called reversed engineering, a way of constructing by analyzing constructions already done.When the Modules are analyzed, the functions of the prototype are tested and designed without copying the analyzed Modules.

As the ability to computerize processes and tasks increase, the proliferation of complex systems in our society continues. How these systems are deployed in the organizations where they are meant to be utilized has been shown to have a large impact on how well they function.In January of 2011 the Enköping hospital initiated the deployment of an IT-support for drug management, a Module in the general health care system Cambio COSMIC. Other health care providers in the county, and in the rest of Sweden, have had mixed feelings toward the Module. Some have outright refused the Module, claiming that it is detrimental to patient safety. One of the arguments for deploying the Module in Enköping, however, was that it was needed to improve patient safety.The Enköping hospital is considered to be a well organized institution with good leadership and earlier good experiences regarding IT-systems.

The work was carried out on Termisk Systemteknisk?s office in Linköping. The aim was to create a computer system with infrared camera technology for quality control and temperature monitoring of manufacturing processes in industry. The system should be configurable such that it can be used on several different issues, including those where the real-time analysis of camera images is required.The developed system is based on an existing framework, Panola, to deal with measurement results and images in a database. The framework is built for the system continually check for new data , and the task was to create a foundation upon which to build systems that use the framework, but fully or partially utilize direct calls .

The task was to deliver a solution that could be implemented in today?s production of the FH truck. To make the project successful it was most important that the end result had a high maturity level. For that reason an analysis of ergonomic, laws and regulations, and possible materials where conducted. To show that this project is profitable and can be realized a ruff cost estimated of material and tools is added to the research.

The state of our society is frequently changing. Due to various factors, the pressure of creating a changeable city is high and necessary to adequately supply the needs for its inhabitants. But making these changes and adapt to the fast shifting state of the city is not always physical possible. Young adults and students is a group that often seeks to move to intensely growing city regions. The reason for this is a more promising job market and more attractive educations, but coincidentally the shortage of housing is extremely high in these areas.

This thesis for the Master of Science degree was performed at Solectron Corporation in Norrköping. The background for the thesis was a need to develop and build two test fixtures to automatize testing and adjusting of transmitter Modules (TX-fixture) and receiver Modules (RX-fixture) which are head devices in DWDM-systems. The basic elements for the test fixtures are: Test board, switch board and DC/DC board. The main function of the test board is to handle communication between the transmitter and receiver Modules and supply voltage to these Modules. The test board was insufficient and modified with a microprocessor to handle the communication between the PC and the receiver Module.

The purpose of this Master Thesis is to analyze what suitable hardware platforms there are on the market in order to build a low price control and information system for mobile applications, called small display Module. The thesis will be underlying material for making a decision for further development. The result of the thesis consists mainly of a Windows CE kernel and a schematic for a CPU card, on which it would be suitable to build the display Module. Another major part of the report is the introduction of different techniques that could be of interest when designing a processor based system. The processor architecture that was chosen is the x86.

Syftet med detta arbete är att simulera ett värmesystem i COMSOL Multiphysics, Pipe Flow Module, Non-Isothermal Pipe Flow som innehåller ekvationer och randvillkor för att modellera inkompressibel strömning och värmeöverföring i rör.Data om processen och dess komponenter har samlats in från industrin där arbetet är utfört och i vissa fall modifierats för att bättre beskrivas i programmet.Utifrån insamlad data har en modell byggts upp och två simuleringar har gjorts. En stationär för starten av systemet, den har sedan legat till grund för en dynamisk som simulerar förloppet från start till normaldrift.Tiden det tar för det aktuella fallet att nå drifttemperatur är 16 timmar. En felströmning upptäcktes samt att en av pumparna inte kommer att klara en start från 20 °C..

The thesis work of 15 credits has been performed to interest of Norrtälje ElektronikPartner AB (NEP) in Norrtälje. The aim of the thesis was to develop a prototype for an integrated digital multimeter, designed for one of NEP's proprietary test systems. A digital multimeter Module according to NEP's requirement specification, such as physical size and accuracy should be constructed. The Module should be able to measure current, voltage and resistance.The final circuit was based on the chosen analog to digital-converter, Maxim integrated´s Max134, which is the main component of the circuit for this instrument. A circuit diagram and PCB layout were made. The result of this project is a constructed DMM board.

The aim of the thesis is to present a study of what works well and what does not work so well in today?s use of computers in primary care with a special focus on the use of computers in the management of referrals for consultation. In May 2009 a Module for electronic consultation referrals was introduced in the computer system Cosmic at the University Hospital in Uppsala. Previously, the primary care units had to use two different systems for management of referrals. Referrals sent internally within primary care have been sent electronically while referrals to the University Hospital or other external units were sent on paper.

A large amount of our time is spent indoors in an artificial climate. To make the experience pleasant there are requirements on the ventilation and the heating system. At the present time the most common form of heating is a radiator system complemented with a ventilation system. A ceiling heating system with combined heating and ventilation can replace the two separated systems. The benefit with a ceiling heating solution is that it saves space since the radiator system is no longer needed.