The purpose of this report was to investigate how the abiotic factors (temperature, pH, nutrients, oxygen levels and water content) would affect the Decomposition of oil-contaminated soil and how a variance in structured soil would affect the Decomposition-rate. A minor field-study was made and soil where structured in five different ways (one was a default pile and was used as a reference). The study took place over 137 days and three samples were taken (start, middle, end) and analyzed for aromatic and aliphatic compounds. The result of this study shows that there is a significant difference between all methods for the aliphatic compounds and no significant difference for the aromatic compounds. The abiotic factors that affect Decomposition vary from organism to organism, depending on what type of environment it will function the best.

Decomposition of organic matter is a critical process in the ecosystem, which involves many essential biotic and physical parts. Decomposition is therefore an important process both above and below ground. The rate of Decomposition is dependent of many environmental factors for example: pH, moisture and supply of oxygen. The Decomposition can therefore be affected by large scaled environmental influences, such as acidification and climatic changes. The root litter in the forest is in different ways affected by acidification, liming and manuering.

The Decomposition of organic carbon in drained peat soils is a major source of carbon di-oxide in Sweden. A big part of these drained peat soils are used in agriculture and it is a big challenge to slow down their Decomposition. It has earlier been thought that less tilling and higher water table levels would decrease the activity of soil microbes and thereby the Decomposition, but recent experiments has showed that this has little or no effect. In this bachelor thesis a field experiment was made on drained peat soil with ley, outside Björklinge, Uppsala municipality, Sweden. The experiment was carried out in May 2011. The objective was to develop a method to examine how the net exchange of carbon diox-ide from plant covered peat soil is affected by temperature and photosynthetically active radiation (PAR).

The essay initially intends to find adequate models to describe and forecast monthly data for the Swedish Consumer Price Index sub group Clothes and Shoes 1986-2005. The time series observations during 2006 are considered ?out of sample period? which is used to evaluate the forecasts. The purpose is to perform time series Decomposition and to investigate and analyzethe seasonal pattern. The Box-Jenkins approach is used to find adequate ARIMA models.

The aim of this study was to investigate preschool children's perceptions of trees in and it was done through qualitative interviews. The children were drawing trees and told me what the tree needs to grow and what happens to the leaves in autumn. In a playful way, they learned more about trees and the purpose was also to examine whether they had acquired new experiences and thoughts on the trees, photosynthesis and Decomposition. Then the children were interviewed again to see if their answers were different. The results showed that the children gave different answers at the second interview.

A wastewater treatment plant has the task to refine the wastewater from substances that should not be released into the environment. The Decomposition process can, in a simple way, be described as follows: micro-organisms breathe oxygen and eat unwanted substances. The environment in which the micro-organism lives is known as sludge and the correct amount of oxygen available in the sludge is important for the Decomposition to be effective. The oxygenation of the sludge alone stands for about 30% of the plant?s energy consumption.

The purpose of this thesis was to develop and optimize a method of analysis for combustion of organic chemical products, followed by an ion chromatographic quantitative analysis. This was to be achieved with the Decomposition equipment IKA AOD 1. The aim was to receive a precise and repeatable method that would be able to be applied to the process of qualification and technical marking of chemical products at the company, OKG AB in Oskarshamn. A complete instruction for the Decomposition equipment and the method of analysis was written. A number of parameters were chosen from the general method of the combustion equipment, which then was tested parallel with a simultaneous development of an appropriate ion chromatographic method.

In order to reduce greenhouse gas emissions from human activities fossil fuels will have to be replaced with renewable energy alternatives, such as bioenergy. Sweden has a great potential to produce bioenergy derived from forest products and there is currently a great interest within Sweden in using stumps for bioenergy production. However, the environmental consequences of the method need to be investigated before stump removal can be performed on a large scale. Swedish forest soils contain large carbon pools and a different land use may change conditions so that soils that presently act as sinks of carbon could potentially turn into sources of carbon release instead. This study investigates the initial effects of stump harvesting on the emissions of three greenhouse gases, carbon dioxide, methane and nitrous oxide. The emissions were measured from the soil surface in a Norway spruce forest located in the southern part of Sweden.

This paper deals with a taphonomic study of contexts with osteological material of dog (C. familiaris L.) from the Mesolithic and Neolithic of Sweden and Zealand, Denmark. The general aim is to develop and test a method to try to understand the activity behind and define specific archaeological structures. My questions also regards to wether a taphonomic analysis of the material could be used to identify treatments as wrapping and contraction of the dogs, but also dismembering and other preparations of the body. The study focuses on the relation between the space of Decomposition, disarti-culation of the joints, evidence of wall effect, cutmarks, weathering and signs of postdepositional arrangements.The analysis is based on contexts from the materials Hornborgasjön, Vedbæk, Skateholm I and II, Sjöholmen, Ertebølle, Bökeberg, Bredasten, Löddesborg, Bergsvägen and Röekillorna, dating from early Maglemose culture to Neolithic Battle axe culture.The analysis shows that a closer study of taphonomic processes can be used to identify different structures as graves, offerings, religious and non religious contexts or parts of animals, probably put into the ground as waste.

The main project Dry preservation of source-separated organic household wastes involves a new technique for treatment of biowaste through drying. Investigations are going on to determine how the dried biowaste best can be used to close the natural circular flow of nutrients. The objective of this degree project is to determine if the dried biowaste can be used as a soil conditioner. By restoring the nutrients in the material to the ground, the natural circular flow is closed. A declaration of contents, including the nutrient levels, C/N ratio, pH and the electrical conductivity of the dried biowaste, was constructed and a germination test was done to make sure that the material did not inhibit sprouting.

The purpose of this work was to provide a better understanding of urea?s Decomposition and byproduct formation in an SCR system on heavy trucks. In my experimental setup with TGA-DSC-FTIR (a combination of two thermal analysis methods and a method for gas phase detection), an FTIR method for urea in the gas phase was developed for the qualitative and quantitative determination of urea and its Decomposition products. Chemicals such as urea, biuret, cyanuric acid and melamine of p.a. quality were used in this method development. Beforehand, there was no FTIR method available to detect these substances; hence, the aim of this work was to develop an FTIR method to understand the degradation chain of urea. The combination of TGA and DSC was used for analysis of different samples, where urea, biuret, cyanuric acid and melamine in varying amounts have been weighted in for various experiments in order to study the temperature at which a phase transition or reaction occurs, i.e.

Högbytorp is Ragn-Sells? largest waste facility and it is located north of Stockholm. There is an old landfill still in use, but at the end of this year it will be closed. The waste deposited on the landfill can, through Decomposition, give rise to a large amount of methane gas, which is an energy rich gas that can be used for heat and electricity production. To receive a relatively large amount of gas, the Decomposition requires a high moisture content in the waste.

Stump biomass is energy rich and stump harvesting for use as fuel become more and more interesting in Sweden. Swedish Forest Agency (2009) has estimated that stump harvesting in Sweden would respond to an annual energy supply of 57 TWh/year. However, stump has not been recognized as a bioenergy resource in Sweden. Suitable methods for pre-treatment of stump are probably of great importance to make it accepted as fuel. It is therefore rewarding to carry out an investigation in this area for stump. This report represents results from a diploma project, which was aimed to develop a fixed bed reactor for experimental study of biomass torrefaction, followed by TG analysis and kinetic modelling employing Ozawa method and different kinetic models including one-step and three-pseudo-component models.

The aim with this study was to investigate mortality in older respectively younger beech stands (Fagus sylvatica), the different types of dead wood in the forest and the availability of coarse woody debris (CWD). The research was carried out in previously managed and seminatural stands in Biskopstorp and Frodeparken, located north of Halinstad in Halland,Sweden. Data were collected from 22 stands with at least 50 % beech and with a minimum age of 5 1 years, ranging in size from 0,67 to 19,9 ha. A transect was placed in each stand, in which the diaineter on both dead and living trees with a minimum diameter of 50 mm was recorded. On seven to 13 dead trees, depending on the size of each stand, Decomposition stage, primary and secondary cause of death, amount of fungi and the type of the dead wood was noted.

Constantly growing demands from the costumers in the Automotive industry forces the subcontractors to seek alternative ways to compete. One parameter of quality is the components tolerance against NVH(Noise, Vibraion & Harshness) aspects. Kongsbergs Automotive has developed a new gear shifter platform (Shift-by-Wire) that is sold to Alfa Romeo and used in of their car models. However, the company is not pleased with the components sound quality, therefore the main purpose of this thesis is to develope a number of concepts that is supposed to enhance these NVH-aspects.To get an understanding of the problem an analysis of the causes of the emitted sound has been done parallell to a product Decomposition, function Decomposition and a Ishikawa-diagram. Together with these methods has a litterature study been performed to get familiar with the physics of an impact and especially the emittment of noise.