This report tested the possibility of using induction as a mean for transferring data and power so that it can be implemented as a communication medium between a terminal and measuring head mounted in a measuring frame. This would eliminate the need for the cable bunches that are used today. For testing, signal generators were used to generateFSK-signals and were transferred with the help of inductors to the oscilloscope for signal detection, this to see how the Coils used in the tests behaved. Simulations of a PLL were performed to see how good it could handle FSK-demodulation. With the help of a PLL IC and the simulations a working FSK-demodulator could be assembled.

By our employer Camatec Industriteknik AB have we been given the assignment to continue with the previous work ?Design of strip feeder?. Our goal with this work is to come up with a design basis for a strip feeder.Functionally a strip feeder consists of two rollers which with the aid of the friction between the strip and the coating on the roller create a strip force that pulls the strip through the working progress.Demands on this project:? 10 ? 600 mm in strip width and 0,1-1 mm in strip thickness.? Minimum 30m/min in production speed.? A maximum strip force on 30-40 kN.? The cost of the strip feeder?s components is to be considered of economy and quality.The need of a strip feeder occurs when the coil doesn?t manage to feed or pull the strip before or after a working process. The strip can otherwise be exposed by a permanent yield deformation or a change in the strip material if it?s pulled trough the working process only by the on ? and of-Coils.

The report comprises two separate parts:part 1:  Temperature needs for district heating in the paint shop for axles in building 210part 2:  Energy and low temperature waste heat solutions in heating and cooling systems for   building 64 with surroundingsThe paint shop for axles in part 1 has air quality requirements in places for coating of axles. Toachieve desired air properties there are different process ventilation systems, which consist ofventilation Coils for heating and cooling, plus air humidifier. The ventilations Coils for heating usedistrict heating. Today the ventilation Coils use water of 100°C to achieve necessary air demands inthe coating boxes. This part of the report investigates whether the existing system would achievethe air requirements with a water temperature of 75°C instead of 100°C in the ventilation Coilsduring the coldest parts of the year.

Ferruform är ett företag med ungefär 600 anställda och ingår i SCANIA koncernen. Tillverkningen i Luleå är inriktad mot lastbilskomponenter som t.ex. tvärbalkar, bakaxelbryggor och andra ramkomponenter. Dessa transporteras sedan vidare till bland annat Zwolle och Södertälje för slutmontering. Detta examensarbete riktar in sig mot Ferruforms 3-press som idag förses med klippta plåtämnen. Arbetet går ut på att undersöka möjligheterna att förse den med en avhasplingsutrustning.

Ferruform är ett företag med ungefär 600 anställda och ingår i SCANIA koncernen. Tillverkningen i Luleå är inriktad mot lastbilskomponenter som t.ex. tvärbalkar, bakaxelbryggor och andra ramkomponenter. Dessa transporteras sedan vidare till bland annat Zwolle och Södertälje för slutmontering. Detta examensarbete riktar in sig mot Ferruforms 3-press som idag förses med klippta plåtämnen.

This paper describes a method for wireless energy transfer via near-field electromagnetic inductionthat is inexpensive, simple and can be applied to almost any type of system, regardless of size andenergy demands.The method uses a primary unit consisting of an oscillator, amplifier and inductive coil thattransfers energy to a secondary unit consisting of a coil, rectifier and voltage regulator. Two typesof oscillators and several amplifier designs were realized and evaluated together with a multitudeof flat Coils of both monofilar and bifilar type.The results show that it is important to use an oscillator whose frequency is dependent on theinductance of the connected transmission coil, such as the Colpitts oscillator. This is preferable toan oscillator with a preset frequency, such as a Schmitt-trigger oscillator..

The purpose of this thesis was to design an electrical system for use in a ballistic test at the Swedish National laboratory of forensic science (SKL). The detector unit would use four main parts: Coilsystem, transmitter, reciever and indicator. The Coilsystem would be based on a balanced system using three Coils. One that creates a magneticfield and the other two will sense the differences when a metallobject is in the Coilsystem. This report starts out by investigating possible solutions for this specific task followed by a description of the physics that the metaldetector use.

This paper describes a method for wireless energy transfer via near-field electromagnetic inductionthat is inexpensive, simple and can be applied to almost any type of system, regardless of size andenergy demands.The method uses a primary unit consisting of an oscillator, amplifier and inductive coil thattransfers energy to a secondary unit consisting of a coil, rectifier and voltage regulator. Two typesof oscillators and several amplifier designs were realized and evaluated together with a multitudeof flat Coils of both monofilar and bifilar type.The results show that it is important to use an oscillator whose frequency is dependent on theinductance of the connected transmission coil, such as the Colpitts oscillator. This is preferable toan oscillator with a preset frequency, such as a Schmitt-trigger oscillator..

Norconsult AB has developed a solarhousing concept, a house designed for the warm climate in the Middle East andwith large quantities of solar panels installed. The cooling system for the house was designed in an earlier report, the purpose of this thesis is to investigate the possibility of short and long term storage of thermal energy via an underground energy storage volume.Two different designs of the storage and three different filling materials have been integrated into a model to simulate different cases. The first design consisted of pipes installed in the ground, without insulation. The second design consisted of an insulated concrete box installed to prevent thermal energy from the surrounding soil to flow towards the lower temperature regions within the storage. The three different filling materials were dry saudi sand, water saturated saudi sand and the filling material used by the client for energy storage in Sweden.The results from the simulations show that neither of the designs, regardless of the filling material, managed to extract enough thermal energy from the house to the ground to uphold the demands of indoor climate.

For Skattkärr IF a turf field with warming has been projected to increase field?s utilization hours and to have a longer period for athletes to perform their activities outdoors. The technique chosen to heat the plan is a type of a geothermal heating system without a heat pump. The brine, which is water with 30% ethanol, collects heat from the borehole and discharges it to a coil in the field. There is at position 11 boreholes but it is planned to increase the number to 31, which is the design for the facility.

Det finns i dagsläget ett stort antal bostadshus som inte har någon värmåtervinning i ventilationssystemet. För att uppnå energiförbrukningsmålen till 2020 och 2050 är ett alternativ att sätta in värmeåtervinningsbatterier i frånluftskanaler som ansluts till en värmepump.Syftet med detta projekt har varit att undersöka hur energiförbrukning och årlig kostnad påverkas av temperaturer från värmeåtervinningsbatteri. Parametrarna som har undersökts är normala variationer av:-          Frånluftstemperatur-          Fukthalt i frånluft-          Frånluftsflöde genom batteri-          Vätskeflöde genom batteriUtöver detta har även totalvärmefaktorn för anläggningen undersökts beroende på om det är en varvtalsreglerad värmepump som används jämfört med en värmepump med steg samt hur totalvärmefaktorn har påverkats när solfångare ansluts till systemet.Vid beräkningar och simuleringar har två värmeåtervinningsbatterier undersökts, ett traditionellt batteri från Luvata och ett nålrörsbatteri från Retermia. De två värmepumparna som har undersökts är en fastighetsvärmepump från IVT och en industrivärmepump med varvtalsreglering från Kylma. Dessa beräkningar och simuleringar har utförts i programmet Coils och Microsoft Excel.De fall som har undersökts är:Fall 1: Luvata-batteri anslutet till Kylma-värmepumpFall 2: Retermia-batteri anslutet till Kylma-värmepumpFall 3: Luvata-batteri anslutet till IVT-värmepumpFör att få en bild av hur lönsamt det är att värma tappvatten med värmepump kontra fjärrvärme har fjärrvärmepriser och elpriser jämförts.

Sweden is a country that has made some progress in developing energy efficient solutions. The problem in Sweden is that many houses and apartment buildings are old and have inefficient ventilation- and heating systems. This energy is lost when systems are inefficient, which then results in huge economic costs. Luckily, more and more people are becoming aware of this, which means that Sweden is on track to become even better within energy efficiency.Energy use for the housing- and service sector amounts to 166 TWh of total use at 616 TWh. Without distribution and conversion losses, these figures show that the housing- and service sector accounts for almost 40 % of the country's total energy consumption.