This report deals with the performance of a Batch flow treatment of landfillleachate compared with a continuous flow system. The parameters in focus were total Kjeldahl nitrogen (TKN), BOD5 and COD. The pilot-scale experiment used eight barrels with a volume of 150 liters. Each barrel was constructed differently concerning its flow, its bed material grain size and its presence of plants or not. Four of the barrels worked in Batch mode, thus four in continuous flow mode.

This essay begins with a literature study of the different propagation methods for roses, and a survey of the factors affecting the rooting of cuttings in general and rose cuttings in particular. The main part of the essay consists of a practical study of the rooting of rose cuttings. I have chosen to examine how the time of year when the cuttings are taken, and the position of the cuttings influence the rooting. Three different cultivars were used as mother plants; ?Maria Lisa? and two Burnet roses; ?King of Scots? and ?Poppius?. The mother plants were container grown ?King of Scots? and ?Maria Lisa?, and outdoor grown ?Poppius? and ?Maria Lisa?.

The work with this report has been focused on developing a methodology model for control at purchase. The methodology model covers parts classification, dispatching systems, Batch shaping and more. The aim with the methodology model is that it will be used as an aid for a cost effective material planning to increase the value for customer.The work covers also a description of the present situation and the purchase process at Company X. Six parts have been applied, two from each class (A, B and C), in the methodology/model. The parts that have been applied are included in the flow between Company X and their supplier Company Y.Data have been collected trough literature studies, interviews and the company?s business system.

Four different kinds of filter-materials with reactive surfaces have been studied concerning their capacity to absorb heavy metals in leachate from a municipal waste deposit. The heavy metals studied were: lead, cadmium, copper, mercury, chromium, nickel and zinc. The leachate contains high levels of dissolved organic carbon (DOC) and has a high pH-value along with a high buffer capacity. These characteristics of the leachate make it difficult to remove pollutants and require efficient filters. The filters that were examined in the report are blast-furnace slag with CaO, sand covered with iron oxides, olivine and nepheline.

Käppala wastewater treatment plant situated on the island of Lidingö northeast of Stockholm is running a project during 2004 and 2005 with the purpose to map out the capacity of anaerobic digestion in the digesters that treat primary and excess sludge. The purpose of this thesis work, which is part of that project, was to characterize the present anaerobic digestion process and to investigate its capacity to treat other organic wastes such as restaurant waste and waste from water works. To decide the potential of both methane and biogas production from different substrates Batch laboratory tests were carried out. To imitate the anaerobic digestion process at Käppala continuous tests with small scale reactors were carried out. These reactors were later fed with restaurant waste.The Batch laboratory tests showed that primary sludge had a potential biogas and methane production of 0,62 and 0,35 Ndm3/g VS respectively after 40 days of digestion.

The component workshop at Atlas Copco inTierp intends to reduce the costs inorder to increase their competitiveness.This thesis examines how the productionmanagement around cylinder washersshould be managed in a way that meetsthe customer needs. The customer to thecylinder washer is Atlas Copcos assemblydepartment in Tierp.The purpose of this thesis is to providean alternative way of managing theproduction. A chapter of theory is addedto give the reader an insight ofdifferent types of production managementsystems as well as the underlyingknowledge needed to get a better readingexperience. An introduction of kanbancan in theory help Atlas Copco in thedirection they strive. It should beclear how the purpose of this thesisaffects the cost for the componentworkshop and also how it relates to thecurrent production.

In organic animal production, synthetic amino acids are not allowed. Therefore, a higher level of crude protein is needed in the diet to pigs, which lead to more nitrogen (N) excreted in the faeces and urine. N can be emitted to the air in the form of e.g. ammonia (NH3), which contributes to eutrophication and acidification and as nitrous oxide (N2O), which is a very potent greenhouse gas. The emission of N can be reduced by e.g.

This study was conducted at the City Abattoir in Kampala, Uganda to evaluate the cleaning process, with focus on bacterial pathogens, in a pilot scale integrated bioprocess. This consisted of four steps: anaerobic sequencing Batch reactors; aerobic/anoxic sequencing Batch reactors; a high performance temperature controlled methanogenesis digester and a constructed wetland. The objective was to determine if this type of cleaning process could be used to clean wastewater from abattoirs in a satisfactory way. The indicator organisms for faecal contamination, Escherichia coli and Enterococcus spp. were used to investigate in what numbers bacteria could be found in the untreated wastewater and how much that was reduced in the different steps of the cleaning process. The water was analysed for Salmonella to see if human pathogens could be found and could survive the different steps of the treatment process.

In this thesis the methane gas potential of three different substrates, two algaes Saccharina latissima and Laminaria digitata and biosludge mixed with paper fiber was studied. This was done by Batch experiments in a laboratory environment to examine the gas production and composition of the produced gas.Biogas production is a complex anaerobic digestion process in which various microorganisms decompose the substrate in steps and at the end produce biogas and a residue. Many factors affect the production of gas, for example the substrate content, temperature and pH in the digester.The analysis of methane potential were divided into two experiments. In experiment 1 substrates were digested along with inoculum from Växjö waste water treatment plant in a temperature of about 37 ?C.

This paper aims to describe the variation and develop a method to control the production for the product Metropol Kaktus from the snuff developer Fiedler & Lundgren. We are going to use the requirements from the product specifications as limits of the expected quality when we present methods to control the process. One method attempts to control during the process and the other attempts to maximize the number of products with strived quality before the process starts. Metropol Kaktus is a product produced with high quality, the mean weight is 20,023 gram and this is very close to the weight, 20 gram, which is reported in the product specifications. The variation in weight variable is less than what is reported in the specifications and the minimum weight is over the limit set by Livsmedelsverket.

An excessive input of nutrients to lakes and other water bodies has created a problem with eutrophication in Sweden. Untreated, or partially treated, domestic sewage is a major source for discharge of phosphorus (P), which is the nutrient most frequently responsible for eutrophication of most fresh waters and the Baltic Sea. The waste water can be cleaned by filter materials, which have a high P-retention ability and which after saturation may be used as fertilizers. Four potentially suitable filter materials were tested in Batch- and column experiments in this study. In the Batch experiments, the following materials were shaken with waste water in time series ranging from 5 seconds to 60 minutes: coarse (1-4 mm) and fine (0-2 mm) Polonite® (heated bedrock from Poland); Filtralite® (light expanded clay aggregates with limestone added before burning); water cooled blast furnace slag (BF-slag) and BF-slag mixed with 10% burned limestone.

Business unit Cylinder at ASSA AB in Eskilstuna are having problem with frictions in their production process. Changes are occurring and older products along with machineries are phased out and transferred to low-cost countries. This opens up possibilities to at a larger extend customize physical flows after production flows. The authors where given the task to analyze the production and find problem areas to improve and to give suggestion on how Business unit Cylinder can work to optimize their production flow.The aim of the thesis work is to come up with suggestions on how to reduce the lead time in production and how the tied up capital can be reduced. In more detail the task included to find problem areas that are counteracting an effective flow, give solutions on new flows for the production of the cylinder core, give suggestions for new stock points for the production and how the production shall be managed and controlled.During the last twelve months ASSA AB has sold over 700 different types of cylinder cores, and the product range is very wide.

Brämhults Juice AB is one of Sweden?s leading producers of fresh fruit juices and drinks. The fruit drinks last 3 days once opened and when stored in a refrigerator kept at 7°C. Since factors that shorten the drinks? best before date are usually not noticed until the entire Batch has expired, it would be advantageous to find a way to accelerate the drinks? natural deterioration, so that an unusal short best before date is noticed before more products are shipped off to the stores.

Brämhults Juice AB is one of Sweden?s leading producers of fresh fruit juices and drinks. The fruit drinks last 3 days once opened and when stored in a refrigerator kept at 7°C. Since factors that shorten the drinks? best before date are usually not noticed until the entire Batch has expired, it would be advantageous to find a way to accelerate the drinks? natural deterioration, so that an unusal short best before date is noticed before more products are shipped off to the stores.

Haldex Barnes Hydraulics (HBH) is a company which produces hydraulic aggregates for use in forklifts, construction equipment, and trucks. The last two years the company has expanded. This has lead to an insufficient production of aggregates. Thus wishes HBH to increase their production without making to large investments.This report includes a now-state analysis of the problems and where they are. From this a further analysis of possible improvements are made.HBH works mainly with assembling and this is made manually.