Sök:

Sökresultat:

86 Uppsatser om Zinc coating - Sida 2 av 6

Blood compatibility of biomaterials made of recombinant spider silk

Native spider silk is an attractive lightweight natural polymeric material with a unique combination of strength, extendibility and flexibility. Synthetic, recombinant spider silk is an attractive biomaterial with several possible fields of application. When a foreign material is introduced to blood, this can for example cause unwanted coagulation and complement activation. The aim of this study was to investigate if coatings of heparin or albumin could improve the blood compatibility of films of recombinant spider silk and to develop an initial method to do so. Hypothetically, objects like pacemakers, stents and dental implants could be covered with spider silk films of high blood compatibility to reduce potentially harmful foreign body reactions caused by the immune defense. Increased blood compatibility would likely lead to improvements for both the individual patients and the society thanks to reduced load on healthcare institutions. Our objective was to assess the blood compatibility of both functionalized and non-functionalized recombinant spider silk by evaluating coagulation and activation of the complement system of the immune defense. Coagulation was evaluated visually on glass slides and complement activation was analyzed by measuring the concentration of the complement system mediator C3a in blood samples that had been exposed to the different materials. This study introduces a non-toxic and easy performed method of improving the blood compatibility of recombinant spider silk films by adding a heparin coating. Heparin coated surfaces had statistically significantly higher blood compatibility than uncoated surfaces. The effects of albumin coating of films were less clear compared to the results of heparin coated films. Complement activation could not be evaluated because of high activation in all samples prior contact with the materials that were included in the study..

The legacy of the mill : a metal polluted forest soil in Gusum

Soils in a metal contaminated site on Stångberget in Gusum in southeastSweden were investigated and compared to relatively unaffected soils a fewkilometres away. Pollution came from historical release of untreated flue gasesfrom a brass mill. The objective was to find information on how high the metalconcentrations are, if metals from the polluted soil affect the surroundings andif the metal contamination affects the microbial community. The soil wasinvestigated using several different methods, such as field XRF measurements,chemical analysis of metal, carbon and nitrogen content, pH, acid neutralizingcapacity, texture, soil depth, field leach tests, sequential extraction and microbialfunctional profiles. The study showed that copper and zinc concentrationswere above Swedish Environmental Protection Agency guidelines for lesssensitive land use on the entire investigated area.

Spelutveckling och lansering av applikation till Android

For several years Uppsala University together with several companies has been involved in a WISENET project aimed at improving railway transport security. By placing a sensor system near the wheels of each wagon, the temperature of the bearings can be measured and transmitted to a collector placed centrally on the wagon. This in turn transmits the collected data to RFID receivers placed intermittently along the railway.As the signals are transmitted wirelessly, problems may occur as the antennas get dirty or coated with ice and snow. To determine the effects of these coatings, several tests were performed examining the reflection coefficient S11, the impedance Z11 and the efficiency eta of an antenna, and how they varied when various coatings were placed over the antenna. Examined coatings were ice, snow and water to determine the effects of weather, and various metal-based coatings: powdered iron both pure and partially oxidized, and iron ore granules.

Växters förmåga att ackumulera metaller : Vass, bredkaveldun och gäddnate i Bergviks dagvattendamm

AbstractSurface-water includes different kinds of pollutants from traffic and roads. To prevent these pollutants to reach nearby lakes one can construct surface-water ponds on locations with heavy traffic. At Bergviks shopping centre in Karlstad, two ponds, one smaller and one bigger has been constructed in order to decrease the pollutant pressure from the receiving waters of Kattfjorden. Several heavy metals are essential for plants and animals in low concentration but when they occur in higher concentrations, they become toxic to the organism. The larger pond at Bergviks shopping centre has a sedimentation function so the heavy metals sink to the bottom thereby not releasing directly in to Kattfjorden.

Experimentell konstruktion av pickupsystem anpassat för trummor med hjälp av MATLAB

For several years Uppsala University together with several companies has been involved in a WISENET project aimed at improving railway transport security. By placing a sensor system near the wheels of each wagon, the temperature of the bearings can be measured and transmitted to a collector placed centrally on the wagon. This in turn transmits the collected data to RFID receivers placed intermittently along the railway.As the signals are transmitted wirelessly, problems may occur as the antennas get dirty or coated with ice and snow. To determine the effects of these coatings, several tests were performed examining the reflection coefficient S11, the impedance Z11 and the efficiency eta of an antenna, and how they varied when various coatings were placed over the antenna. Examined coatings were ice, snow and water to determine the effects of weather, and various metal-based coatings: powdered iron both pure and partially oxidized, and iron ore granules.

Metaller i dagvatten - Effekter i recipient : En analys av koppar, kdamium och zink i dagvatten från en parkering i Halmstad, Sverige

When stormwater occurs near human activity the water gets polluted. The purity and composition vary widely depending on the types of activities in the area, the type of surface the water comes in contact with, precipitation and many more parameters. It has long been known that stormwater quality can affect both human health and the environment as stormwater is a major contributor to pollution of receiving waters.A human activity that has an impact on the environment in several different ways is traffic and stormwater is no exception. Airborne gases that react with precipitation, oil leaks and fuel systems that drops down on the ground, metals from brake linings and rubber particles from tire wear are some of the aspects you have to take into account when categorizing the relationship between traffic and polluted stormwater.In this project, stormwater samples from a parking lot in Halmstad, Sweden were collected and analyzed with an atomic spectrophotometer. The presence and relationship between copper, cadmium and zinc with different rainfall parameters have been studied.

Optimering av driftläggningar i Fortums nät

Future emission legislation puts great emphasis on increasing the efficiency of the engine, thereby reducing fuel consumption. The tribological contact between cylinder liner and piston ring is where an great amount of energy is lost due to friction, and by reducing these losses an reduction in fuel consumption can be achieved.The aim of this thesis was to evaluate the tested piston ring coatings against a plasma sprayed cylinder liner and rank these combinations of materials for friction and wear resistance. The coatings that were tested was Cr + Al2O3, (Al,Cr)N, two types of CrN and WC / C.The experimental tests were performed with a so-called pin-plate, where used oil with addition of an acidic mixture of sulfuric and nitric acid to mimic the acidic condensate formed when exhausts recirculate, were added with a continuous flow. The results were then analyzed by weighing, studies by optical microscopy and scanning electron microscopy (SEM) and profile measurements.The results from each material combination were that the plasma coated cylinder liner wears too aggressively in order to yield a ranking of the piston ring coatings based on the parameters of friction and wear resistance. It is therefore proposed that an alternative coating on the cylinder liner should be developed, lacking the large abrasive wear on piston rings and that can withstand the corrosive environment resulting in engines equipped with EGR.

Studie av belagda kolvringarmot plasmasprutat cylinderfoder : Med avseende på friktion och nötningsmotstånd

Future emission legislation puts great emphasis on increasing the efficiency of the engine, thereby reducing fuel consumption. The tribological contact between cylinder liner and piston ring is where an great amount of energy is lost due to friction, and by reducing these losses an reduction in fuel consumption can be achieved.The aim of this thesis was to evaluate the tested piston ring coatings against a plasma sprayed cylinder liner and rank these combinations of materials for friction and wear resistance. The coatings that were tested was Cr + Al2O3, (Al,Cr)N, two types of CrN and WC / C.The experimental tests were performed with a so-called pin-plate, where used oil with addition of an acidic mixture of sulfuric and nitric acid to mimic the acidic condensate formed when exhausts recirculate, were added with a continuous flow. The results were then analyzed by weighing, studies by optical microscopy and scanning electron microscopy (SEM) and profile measurements.The results from each material combination were that the plasma coated cylinder liner wears too aggressively in order to yield a ranking of the piston ring coatings based on the parameters of friction and wear resistance. It is therefore proposed that an alternative coating on the cylinder liner should be developed, lacking the large abrasive wear on piston rings and that can withstand the corrosive environment resulting in engines equipped with EGR.

Smart seed : fördröjd groning hos raps : försök med frö-coating samt litteraturgenomgång om frögroning, coating och praktisk tillämpning i reläodling

Oilseed rape constitutes a good break crop within a cereal dominated cropping system. The normal sowing time for winter rape in Sweden is August. It's a time in the cropping year characterized by a heavy work load, such as harvest and soil management. In addition, it is often a period with large precipitation. Thus, it is sometimes problematic for the farmer to do the sowing of winter rape at the optimal time.

En undersökning av tre olika behandlingsmedels effekt på vegetabiliskt garvat läder för bokband

Title in original language: En undersökning av tre olika behandlingsmedels effekt påvegetabiliskt garvat läder för bokbandLanguage of text: SwedishNumber of pages: 32.

Dietary intake of zinc and iron within the female population of two farming villages in the Red River Delta, Vietnam

In many developing countries, among them Vietnam, contamination of agricultural land is a major issue that has public health implications. A fast growing population, rapid urbanization and industrialization have led to air and water emissions of potentially toxic elements (PTEs), such as cadmium (Cd). Earlier studies have shown that individuals with low iron (Fe) and zinc (Zn) status absorb larger quantities of Cd than those of adequate nutritional status. The purpose of this study was to investigate and compare the Fe and Zn intake from the foods consumed by women (15-45 years) in selected households in two agricultural villag-es in the Red River delta in Vietnam. In one of the villages the residents were involved in metal (mainly Fe) recycling activity, whereas in the other village the residents had agricul-tural production as main source of income. Interviews, followed by food intake calcula-tions, were performed.

Beräkning av massbalanser för metaller i vatten samt miljöriskbedömning av Nerån vid Österbyverken i Östhammars kommun

Österbyverken is an industrial estate in Östhammars municipality in Uppland, Sweden. Many different activities have taken place on the estate the last 600 years. During the last 15 years both health and environmental studies have been made by different companies. At the most recent study a great increase of metals in Nerån, a river that runs partly through and partly next to the estate, was identified with mass balances. The purpose of this thesis is to accomplish a deepened study about the reasons for the increase of metals in Nerån.

Utvärdering av rörelsemönster hos öring (Salmo trutta) utifrån otolitmikrokemi

The classic view of trout (Salmo trutta) life history is that trout begins its life in freshwater, migrates to the ocean after about 1-4 years and then returns to freshwater to spawn. As trout fry have been caught at the mouth of the River Emån, near the Baltic Sea, researchers have speculated that some trout emigrate during their first year of life. The purpose of this study was to describe the variation in the length of time trout reside in freshwater before they migrate to the ocean for the first time. Another purpose was to investigate whether it was possible to discern where and how long the fish spent in freshwater and saltwater during different parts of their lives. Between 2007 and 2009, 23 adult trout were captured in the River Emån in southeastern Sweden.

Textile Electronics -Screentryckta konduktiva ledningsbanor pa? textila material

Studien underso?ker mo?jligheten att anva?nda ledande partiklar besta?ende av silver- belagda kopparflingor, fo?r att tillverka konduktiva ledningsbanor pa? textilsubstrat. Syftet med denna studie har varit att tillverka de banorna med hja?lp av screentryck- teknik. Sammansa?ttningen av bela?ggningsformuleringen har en stor inverkan pa? den be- lagda textilen och de ledande egenskaperna.

Textil fotokatalytisk vattenreningsreaktor: Optimering av beredningsparametrar för titandioxidbeläggning på polyestersubstrat ämnad för vattenrening

I denna kandidatuppsats avlägsnas organiska föroreningar från vatten genom användning av textilier, vars yta belagts med nanopartiklar utav ämnet titandioxid. När titandioxid belyses med UV-strålning sker en fotokatalytisk reaktion, vilket i sin tur bryter ned bland annat bakterier och organiska färgämnen. I hopp om att finna ultimat vidhäftning mot textil passande titandioxid har olika typer av beläggningar studerats; akrylbaserade, sol-gel och slutligen en hybrid. Dessutom har fem olika konstruktioner av textila bindningar jämförts i syfte att undersöka dess påverkan på den fotokatalytiska effekten. Förorenade vatten är ett stort problem, både i utvecklingsländer och i industriella sammanhang.

<- Föregående sida 2 Nästa sida ->