The streetscape is a complex environment with a lot of different parts and users. If you look at the streetscapes main parts you have floor, walls, roof and furniture. The floor in the streetscape, the street, consists of the ground and the paving. It can be made of a lot of different materials with both architectonic and practical functions. The walls usually consist of the houses. They have a big influence on the streetscape depending on architecture, heights and widths.

Arbetet handlar om att skapa en mönsterkollektion för Eco-Boråstapeter. Kollektionen består av fem mönster som behandlar struktur, volym, rörelse och rytm. Tapeterna trycks med djuptrycksmetod på slätt bestruket non woven-papper. Målgruppen är unga designintresserade människor. En designprocess utifrån en inspirationsfas redovisas som består av experimentella filmer (Grey Gardens, Gummo och The Brown Bunny) och av fotografier tagna under promenader i Växjö.

By applying a segmentation procedure to two different sets of computed tomography scans, two geometrical models of the abdominal aorta, containing one inlet and two outlets have been constructed. One of these depicts a healthy blood vessel while the other displays one afflicted with a Abdominal Aortic Aneurysm. After inputting these geometries into the computational dynamics software FLUENT, six simulations of laminar, stationary flow of a fluid that was assumed to be Newtonian were performed. The mass flow rate across the model outlet boundaries was varied for the different simulations to produce a basis for a parameter analysis study. The segmentation data was also used as input data to a surface description procedure which produced not only the surface itself, but also the first and second directional derivatives in every one of its defining spatial data points.

The climate changes and the global warming have a great impact on the Arctic environments. This partially depends on that the albedo is getting lower when snow and ice is melting and exposes more and more dark surfaces of the land and sea. This leads to a feedback effect; the melting accelerates because dark surfaces attract more sun radiation. Because of the heating the glaciers in Arctic retreat. The purpose of this report is to obtain an eventual change in elevation on the glacier Lomonosovfonna that is located on Svalbard by comparing elevation data collected by NASA and GPS data from 1996-2012.

This work is an exploration of a method and how to find balance between it and its contents. One part consists of a technical study on how to use UV light to yellow distinct surfaces on paper and the other is about how to find use of the method. The common denominator is determined as the consequence of the relationship between light and time. The result is three images that shows various traces of time with time as a graphic expression..

In the early nineties leisure-time pedagogic establishments moved in to school. The aim of the study is to try to find out how leisure-time pedagogues, who have been working for a long time, experience the moving of their establishment in to school and how this affect their practical work and their profession.The study is based on interviewes with four leisure-time pedagogues, who all have been working before?and therefore have experienced the time before?during and after their establishment moved in to school.These interviewes were recorded and later fully transcribed in preparation of analysis. Data was analysed with the help of the sociology of Pierre Bourdieu as a basis. Findings of the study suggest that the leisure-time pedagogues find it positive to be able to cooperate with teachers and other professional groups working in school, they explain how it enabels themselves to see pupils from a different angle and for others working in school to see pupils from a leisure-time pedagogue angle.Some of the pedagogues explain that they find it hard to work with big groups of pupils, or in small surfaces, which they did not have to do before their establishment moved into school.

The aim has been to create a new student housing where there should be more togetherness between people who live in the residents. The house will have more common areas for the integration of students for a pleasant stay in Växjö. We have concentrated on finding and solving the interior design of the joint surfaces. The proposal consists of CAD- drawings.The student area is intended to be placed on the Brände udde, which is part of Campusvision 2005..

This report is presenting an approach that can be used to measure water surfaces in difficult conditions caused by dense vegetation and lack of nearby known points. The objective was to make a contribution to necessary measures for adaptation against floods in Grums Municipality along the stream Karlbergsån, which may occur when persistent rain raises the level of the stream. Along the river there are low-lying areas prone to flooding. According to Grums Municipality, the stream may widen where the water level differences are large, to create a better flow path and to counteract flooding. Grums Municipality was also interested in survey stormwater discharges which may affect the water level in the stream.

The aim of this essay was to examine how the decision-making in LVU cases are motivated in the judicial decisions. How has the principle of whats in the best interest of the child been noticeable in these judicial decisions and how are the child's needs and the consequences for the child of the drug abuse been described? When the parents have been judged to have given a non acceptable consent, how have they been described and how has the parents described the situation?Our research is of a qualitative nature, a document analysis of judicial decisions in LVU cases. We analyzed eight court cases containing decisions from County Court, Fiscal Court of Appeal and The Supreme Administrative Court.Our results showed that parents were described in the judicial argumentation as negative stereotypes and a picture of unreliability were created. What was best for the child were not expressed in words but woven into the children's needs and in most cases the consequences of the abuse of drugs were not made clear..

Native spider silk is an attractive lightweight natural polymeric material with a unique combination of strength, extendibility and flexibility. Synthetic, recombinant spider silk is an attractive biomaterial with several possible fields of application. When a foreign material is introduced to blood, this can for example cause unwanted coagulation and complement activation. The aim of this study was to investigate if coatings of heparin or albumin could improve the blood compatibility of films of recombinant spider silk and to develop an initial method to do so. Hypothetically, objects like pacemakers, stents and dental implants could be covered with spider silk films of high blood compatibility to reduce potentially harmful foreign body reactions caused by the immune defense. Increased blood compatibility would likely lead to improvements for both the individual patients and the society thanks to reduced load on healthcare institutions. Our objective was to assess the blood compatibility of both functionalized and non-functionalized recombinant spider silk by evaluating coagulation and activation of the complement system of the immune defense. Coagulation was evaluated visually on glass slides and complement activation was analyzed by measuring the concentration of the complement system mediator C3a in blood samples that had been exposed to the different materials. This study introduces a non-toxic and easy performed method of improving the blood compatibility of recombinant spider silk films by adding a heparin coating. Heparin coated surfaces had statistically significantly higher blood compatibility than uncoated surfaces. The effects of albumin coating of films were less clear compared to the results of heparin coated films. Complement activation could not be evaluated because of high activation in all samples prior contact with the materials that were included in the study..

My project aims to understand more about the methods used in making woven textiles on an industrial level, and how these tech¬niques can be adapted to create object-specific pieces. On visiting the furniture fair in Stockholm, I was surprised to see that most of the textiles used for furniture were so similar, despite the variation in the furniture itself. My project is about creating textile patterns that are specific for each piece.The idea behind the process could be used for any product, but the pattern I created is specifically for the armchair Accent by Yngve Ekström. I wanted to create the feeling of a pattern moving over the surface of the object and adjusting to it. I worked primarily with differences in density.

Aim and research questionsThe aim of the study was to examine pupils? physical activity on schoolyards in northern Stockholm?s surrounding municipalities, based on the schoolyards? design regarding supply of spaces, material, equipment and gender. The research questions were:1. Was there any association between how well spaces, materials and equipment were represented in the schoolyards and pupils? physical activity during recess? If so, how did the association come to expression?2.

Increased understanding of the mechanisms that operate in conjunction with the welding of metal surfaces may help to improve existing manufacturing processes, and to enable new products and combinations of materials. The purpose of the project has therefore been to acquire a deeper understanding of what is happening in the bond for steel and for the factors that form the basis for a bond to develop between metals in the production of laminates by pressing. The merge has been done by pressing and the surfaces after the experiments have been studied in detail in the scanning electron microscope (SEM), energy dispersive X-ray spectroscopy (EDX) and with interferenceprofilometry in Wyko, to provide a greater understanding of the mechanisms that influence the bonding in the interface between metals. The project was limited to contain the materials Docol 1000, HyTens 1200, Aluminum AA3003 and a commercial steel. The parameters varied in the experiments to study their influence closer are temperature, pressure, heat treatment and pretreatment. This has been implemented by pressing with varying temperature and pressure.

Arbetet gjordes i samarbete med Ka of Sweden där uppgiften varit att framställa enbättre passform för blusar i vävt material. Den nuvarande passformen saknar en brabystanpassning och har liknande ärmhål bak och fram. Jag valde att arbeta fram denteoretiska delen först och sammanställa måttlistor för att sedan arbeta fram denempiriska delen med konstruktioner, avprovningar och färdigt första prov.Resultatet av mitt arbete blev mycket bra och det har varit kul att få arbeta mot ett företag.The work was done in collaboration with the Ka of Sweden where the task was to produce a better fit for the blouses of woven material. The current fit does not have a good bust adjustment and have similar armhole front and back. I chose to work out the theoretical part first and compile lists of measurements and then work out the empirical part of constructions, fittings and finished the first sample.

The aim of this masters thesis is to examine what intentions handbooks, laws and regulations have had about children and childrens literature, as we think that they can serve as guiding principles for childrens libraries in Sweden. The questions are: what signals have the childrens libraries got from the documents concerning the view of children and childrens literature during the 20th century? What has the social opinion about children been during the 20th century? How have children been seen during the 20th century? The method we used is a qualitative source analysis of mention above documents seen from a hermeneutical point of view. This analysis is woven together with the social opinion on children during the 20th century. Our results show that the aim of childrens literature before 1945 was a pedagogic and moral one.