This study aims was to examine if working recreation instructors and the technical literature have the same or different outlook on when the grown ups should attend in children?s play, and what it is that separate them. The work method has been qualitative interviews. The number of interviewed recreation instructors is four. The study shows that the working recreation instructors that I have interviewed consider that it´s important to protect children´s freedom in there play without the grown up´s interference.

The aim of this study was to examine musculoskeletal disorders among dental hygienists inrelation to work postures (sitting, standing, and altering) and to study differences in thegroups regarding numbers of disorders, locations and degrees. A mail questionnaire wasdistributed among 200 dental hygienists in the region of Skåne. The response rate was 79 %.The majority of the dental hygienists were working in a sitting position. Only43 dental hygienists were altering their working position and two were working in a standingposition. The results showed that 85 % of the dental hygienists have experiencedmusculoskeletal disorders in the last 12 months.

When developing software that is meant to be distributed over several different computers and several different networks while still working together against a common goal there is a challenge in testing how updates within a single component will affect the system as a whole. Even if the performance of that specific component increases that is no guarantee for the increased performance of the entire system. Traditional methods of testing software becomes both hard and tedious when several different machines has to be involved for a single test and all of those machines has to be synchronized as well.This thesis has resulted in an exemplary application suite for testing distributed software. The thesis describes the method used for implementation as well as a description of the actual application suite that was developed. During the development several important factors and improvements for such a system was identified, which are described at the end of the thesis even though some of them never made it into the actual implementation.

The title of this thesis is ?The preconditions of the acquisition guarantee- hard to design working political reforms?. The acquisition guarantee (förvärvsgaranti) is a form of credit guarantee issued by the Swedish government to credit institutes that give out housing loans to debtors with poor credit history. The reform hasn´t been used in any substantial extent.The purpose of the study is to investigate whether you could identify any problems with the preconditions that the governmental agency BKN was given to implement the acquisition guarantee, and if so describe which these problems are.Two questions are answered:1.      What preconditions for a working implementation of the guarantee, in the form of rules, objectives and directives was offered by the government in their steering of BKN?2.      How did the structural preconditions for a working implementation of the guarantee look like?By doing a text analysis of central documents I find that the lack of outcome could to some extent be related to weaknesses in how the reform was formulated.

All human beings need and have the right to a language. How a language is learned and used depends on the individual conditions. This study considers the work to development the language done by pedagogues in a special school for mentally retarded children. How do pedagogues work to develop the language in children who are so different and have so different conditions and needs? That is the central aim of this study.

This diploma work has been conducted for the consulting company Ramböll inUppsala, Sweden with the purpose to perform a study with the calculation programFEM Design 9.0 made by Strusoft. The aim has been to find out if it is possible to gainadvantage by utilizing more advanced 3D software for design calculations, instead ofthe traditional methods currently used in construction works.The method of approach has been to model an existing warehouse building with theprogram FEM Design, and then compare the results with those attained with FrameAnalysis and hand calculations. These results are then analyzed. An evaluation is maderegarding to what benefits can be achieved using a more advanced 3D-model.The results of the study show that the differences between the methods are not ofany significance with regard to the design of the steel frame. However in morecomplex materials such as reinforced concrete, the differences become more notable.The conclusions drawn by the authors of this study into FEM Design are that theeducation requirements of the program are higher than for simpler programs, whosepurpose are solving predetermined problems.

Abstract The Act of Education outlines that good quality in schools and preschools, focusing on continuous improvement, promote children?s learning and this in turn is on of the most important factors for child and youth welfare.This thesis was based on the authors´ pre-understanding that there are opportunities to improvement in the quality of preschools. The focus was on studying how analyses can provide a base for quality work, and the purpose of this study was to identify and describe the analytical methods that can be used in the process of continual improvement for quality development in preschools.A qualitative study was conducted in two preschools that have received quality awards. It was conducted through interviews with the preschool principals and through studies of various documents.In the comparative analysis of theory and empirical data, it was made clear that there was a regular analysing process going on at the investigated preschools and an emphasize of reflection could also be identified. Keywords: Quality development, preschool, analytical methods, processes, reflection .

The global Positioning System (GPS) provides location and time information as long as there are unobstructed lines of sight to four or more GPS satellites. However, when this is not the case the signal may be inaccurate or sometimes even completely blocked. In these situations the Inertial Navigation System (INS) is an appropriate choice for positioning.  An INS has already been proposed in a previous thesis by Erik Andersson and the objective of this thesis is to fuse the GPS with the INS in a proper way. A part of this project is to decide the reliability of the GPS.Three methods for GPS reliability detection have been proposed. One method based on the statistical properties of each of the separate systems, and two methods based on the statistical properties of the residuals between the GPS and INS.

This essay was written at Södertörn University during the spring semester of 2010, in the field of Business Administration, and more precisely within management and organization. The essay is based on a case study of the management of the staff working at the commuter train stations in Stockholm. The study consists of a number of interviews with the management staff and with the personnel working at the stations, where the aim of the study is to describe how management works within ISS Trafficare AB and what the personnel working at the stations think of it. ISS Trafficare AB is the entrepreneur who runs the commuter train stations in Stockholm by an agreement met with Stockholmståg KB.The study is based on information from the interviews with the personnel and other material from ISS Trafficare AB. Research on the area of management have been used to put data into perspective and to further deepen our analysis and conclusions from the case.The essay shows that the management has tried to implement several changes on the organization in order to provide more service to the travelers.

To differentiate between bones from sheep (Ovis aries) and bones from of goats (Capra hircus) is a long lasting challenge for zoologists, archaeozoologists and osteologists. Especially considering archaeological remains which are often found fractured and poorly preserved due to taphonomic processes. Zeder & Pilaar?s (2010) and Zeder & Lapham?s (2010) methods of species differentiation has shown promising results when used on bones from modern sheeps and goats. This paper aims to evaluate these methods by exerting them on excavated bones from kv.

Man?s impact on the environment is something that increasingly becomes topical in today?s society. Because of this, several companies have started to take interest in the effects they?re responsible for, not least considering their image. Emissions of carbon dioxide generated from goods traffic are accountable for a large part of the total emissions of greenhouse gases in the world.

This project investigates how four teachers work to encourage their pupils? love of reading. The study was conducted with the focus on teachers working in grades 1?3. The teacher?s view of their own role in furthering love of reading is also considered.It is hoped that other teachers will gain inspiration and ideas about how to work to motivate their pupils to read.To ascertain the four teachers? opinions and thoughts I conducted qualitative interviews which I then analysed with the help of sentence concentration.The study shows that the teachers work in similar ways, but what they all have in common is that they further love of reading through methods that include conversation and communication with classmates and teacher.

PurposeThe purpose of this thesis is to provide a deeper understanding of how e-commercecompanies within the fashion industry are working with lead times and illustrate andanalyse differences and similarities between companies.Research question- In which ways are e-commerce companies within the fashion industry working withshort lead times?MethodologyThis thesis is based on a qualitative research method in order to achieve a greaterunderstanding of the chosen topic, of how the chosen companies are operating and toprovide room to our own interpretations and reflections. Interviews through telephonewere used to gather the empirical data from six different e-commerce companies withinthe fashion industry.ConclusionsAfter completing the theoretical and empirical analysis it can be concluded that leadtimes are considered essential for all of the participating companies but there is adifference in which way they look at, and how they work with lead times. Somecompanies stressed that short lead times are an important aspect of competition andclaimed that this is something they are constantly working with. For others the balanceand matching of supply and demand was the most important factor rather than toachieve short lead times.

Evaluation of joint swelling is an important part of the orthopedic examination and can be used to follow a patient?s progress during rehabilitation and therapy. Usually a swelling is assessed by palpating the joint but a more objective, but still easy to use, method would be preferable.This study seeks to increase the knowledge in veterinary rehabilitation by validating four different measurement tools (three recognized and one novel) for the assessment of elbow joint swelling: palpation, tape measure (circumference and figure eight measurement), slide caliper (craniocaudal and mediolateral positioning) and tonometer. This was achieved by calculating the inter- and intra-rater reliability and correlating the results from the different measurements with each other.The methods with best inter- and intra-rater reliability as well as good correlation among themselves were shown to be slide caliper with craniocaudal positioning, circumference and figure eight. Additional studies, with a larger and more diverse material, ought to investigate these methods further..

The company is currently in a stage of improvement and has therefore taken the help of students at School of Engineering, Jonkoping University. The current production is batch, production layout is fixed. A bottleneck is created after the first station which leads to large efficiency loss.  The meaning of this report was to provide a layout suggestion with balanced workstations to a new production line. The conditions were that the production line would be one-way, driven by customers order and meet a demand of 40 products per week.