Self-compacting concrete has soon been around for a decade. Recently the prefabrication industry has started to use this fairly new concrete type in larger scales, mainly because of its distinctive properties.  There are still certain areas that need to be thoroughly examined, such as bond capacity. There have been very few studies regarding shear capacity due to the fact that the procedure is complicated.This report will highlight a method to examine the shear capacity of different surfaces that have been prewetted as well as non-prewetted surfaces. The surface areas follow BBK 04?s and Eurocode 2?s demand for surface roughness.  A smooth surface will be completed in order to confirm if the different shapes influence the bond strength by shear stress or not.                       The purpose of this essay is to measure the bond strength within the shear capacity as well as examine the impact it has on surface roughness and treatment for shear bond.The method used to identify the shear capacity is called L-shaped Push-Off Test.

Before the European construction standards were introduced in January 2011, it was mainly themethod in BBK04 that was used for calculating punching capacity in concrete structures, and in lesscommon cases the method in BHB. The method of BBK04 is easy to use and have had the samestructure since the first was published in 1979. The Concrete handbook method (BHB) where usuallyonly used when a higher punching capacity was needed and the cross-sectional height where fixed,calculations using this method entails more work, but will in return usually give a higher capacity. Italso allows the use of shear reinforcement to increase the cross-section capacity. The method ofcalculating punching shear in EC2 differs largely from the methods of BBK04 and BHB.

The City of Gothenburg has an urgent need to upgrade its public transport. The capacity of its light rail transit (LRT) has reached maximum capacity within the inner city limits years ago. The construction of an underground metro will be very expensive and time consuming due to the soft clay beneath the city. The apparent need of developing another type of mass rapid transit (MRT) is urgent. An elevated metro have turned out to be a success in Greater Vancouver, but is it possible for the system to operate well in Gothenburg with its narrow streets and current land use; will its route coexist with the current LRT or will the noise disturb people too much?.

ABB Capacitors is looking to introduce LEAN within their organization. The purpose of this research is to suggest ways to improve the production planning in order to facilitate the company?s production processes. This should be done in accordance with the LEAN concept.Today, ABB will produce two of the customers? orders at the same time.

The thesis was done in collaboration with EAB situated in Smålandsstenar. In the initial discussion faze on doing a thesis with them there was a need to analyze and ensure the strength of an existing product, cantilever racks. This included performing FEM calculations on a model and comparing the results with physical tests.EAB has two models of cantilever racks, a light duty and a heavy duty. Within the heavy duty model series there are five product variants that differ in both size and load capacity. We will be working with the product variant with a load capacity of 1000 kg/arm which is the variant that is in the middle of the series.When we started work on the thesis we did a literature study and couldn?t find any well defined methodology that integrates both product development and computer aided design analysis.

Hungary?s share of renewable energy in 2010 was 7.9 %, and their renewable energy goal for 2020 is 14.65 %. Geothermal energy is one option that could help to achieve the goal, since Hungary has favorable bedrock, the temperature gradient is above average and thepermeability is high. Today Hungary is importing just over half of its primary energy supply. Because of political conflicts between nations Hungary wants to expand its own production of energy.

Volvo Hauler & Loader Division in Arvika produces wheel loaders which they deliverthroughout the world. The factory which is situated in Arvika is the largest wheel loader plant in the whole world, with its 1 100 employees. The different models stretch from L60E all theway up to the brand new L350F, with a loader capacity from six tons up to a staggering 35.The assembly of the different models are divided into three different assembly lines, Small(L60-L90), Medium (L110-L120) and Large (L150-L220). The assembly of Heavy (L350)has just been started with an upcoming pre series.This examination paper gives recommendations of improvements and necessary modifications to rationalize the pre-assembly of boom units. Three different scenarios are presented in the paper.

This master thesis was carried out at ELFA, one of the largest catalogue distributors of electronics in northern Europe. ELFA offers a wide selection of products such as measuring instruments, fuses and screwdrivers. The master thesis handles the possibilities of an increase in the internal flow of products. The background to this problem is ELFA?s acquisition of two new companies, which brought the product range in the warehouse from 55 000 to 80 000 products.

The main purpose of this Master?s thesis is to analyse the portrayals of working-class life in a selection of works by the Swedish authors Ragnar Järhult and Per Gunnar Evander. The research questions are: * How is the working conditions described?* What political messages can be found in the works?* What image of the class society is shown?The second aim of this Master?s thesis is to analyse the concept of working-class literature and to investigate if the works of Per Gunnar Evander could be seen as working-class literature. Methodologically, the study draws on established theories, concepts and methods from the sociology of literature and the history of ideas.

The aim of my thesis was to investigate in what grade teachers who work within special education make use any methods to train the working memory of their students to improve learning ability. I also wanted to examine the material used to train working memory and if any results were noticed. My choice of method was qualitative semi-structured interviews that were recorded during the interviews I conducted these in five different school with education for children with intellectual impairment. The result shows that the schools that are aware of recent research on working memory training had methods for training with their students. They could also see a result that shows that working memory can be improved with training.

The global climate-change means increasing mean-temperature and higher precipitation in Sweden, which leads to shorter periods of frozen ground in the forest. At the same time the harvesting machines are getting bigger and more powerful. The forest industry aim at an even wood flow, and the ground damage has to be as low as possible. The two biggest causes for ground-damage is the bearing capacity of the forest ground and the ground-pressure of the harvesting machines. The aim of this study was to find out some rules for the machine choice considering ground pressure, when harvesting on ground with low bearing capacity.A field study, using a Valmet 890.3 forwarder, was carried out where different ground pressures and their effect on the ground were tested on two different types of ground.Additionally, an inventory of damaged harvesting grounds was made.

The working alliance between therapist and client has been proven important for the treatment outcome in psychotherapy, as well as the therapist?s characteristics. The aim of the current study was to examine the experience of important characteristics when forming a working alliance, among psychotherapy trainees. Eight psychotherapy trainees at Umeå University were interviewed and the material was analyzed using Interpretative Phenomenological Analysis (IPA). Characteristics described as positively impacting the working alliance were interested, empathic, warm, genuine, secure, flexible and accepting.

This essay is the result of a case study. The aim of this study has been to gain an understanding of government employee?s opportunity to be involved in and contribute to the processes tied to organizational development. The case study is based on the perspective of the government employees and their experience and thoughts regarding their opportunity to be a part of the organizational development. The empirical data that was generated by the case study has been analysed with New Public Management and Sense Of Coherence as a theoretical point of view.

The aim of this paper is to examine the capacity for ethical reasoning of Swedish certi-fied auditors in the five largest accounting firms in Stockholm, and also how ethics courses affect the auditors' ability to ethically statement. To calculate the auditors ability to ethical statement, questionnaire has been used. The questionnaire is based on a psychological instrument, the so-called Defining Issues Test. At the beginning of the questionnaire some questions are asked about the ethics courses. From the questionnaire a calculation was made of an average index called p-score (Principled score).

The purpose of this study is to examine whether there is any connection between working hours, desired working hours and the worker ?s health. The study also aims to investigate if there are any differences over time. Earlier studies have shown that individuals need a balance in their life between worked hours and free time. This balance seems to be important for employees if they want to lead and remain a healthy lifestyle.