The purpose of this thesis is to construct a marketing model to be used both theoretically and practically when working with marketing in Swedish public libraries. This objective is achieved by first making a literature review of the written works on the marketing of libraries, and then studying the marketing activities at the public library in Bollebygd, Sweden. The theory is based on the marketing mix model the 7 ps, which serves as a framework for the presentation of the empirical result and the analysis. One of the questions posed in the beginning of the paper is how the library has worked with marketing over the past ten years. Through a combination of methods observation, textual studies and interviews the marketing activities employed at Bollebygds library are noted.

This thesis work contains a litterature study about electrical motors in general and how PWM-patterns for brushless DC-motors can be made. A suitable method has been implemented as a simulation model in VHDL. A simulation model of a brushless DC-motor which describes the phasecurrents, torque and angular velocity has also been made. The motor model made simulations easier for the complete PWM-system. The design was synthesised and tested with a prototypeboard including a SPARTAN II FPGA.

This thesis examines why working time preferences differ between workers and nations, and explains the effect of working time regulation and working time flexibility on negotiating work-life balance. In five separate sections the following working time issues are examined: the number of hours worked by workers in Europe; factors affecting individual working time preferences; how working time preferences are negotiated in the national industrial relations systems of Sweden, France and the United Kingdom; how the institutions of the European Union have influenced working time negotiations through the Working Time Directive; and the benefits and practices available to organisations implementing working time flexibility. Broadly this paper views working time preferences as being a highly personal and influenced by factors such as wages, taxation, culture (national and workplace) and non-work responsibilities. It is argued that negotiating a preferred working time pattern is essential to achieving work-life balance and when such a balance is achieved, workers are more healthy, motivated and committed to their employer. Essentially this provides an incentive for businesses to voluntarily implement working time flexibility beyond the regulatory standards..

Rimaster Kisa AB is a member of the Rimaster Group, the corporation was bought from Samhall AB in January 2007. The corporation is producing mechanichs needed by the Rimaster group as well for external costumers. Samhall AB is now functioning as a provider of labor for Rimaster Kisa, as the company is hiring personnel from Samhall AB. The company has earlier have had problems with their lead times being far too long. This has resulted in that the management decided to invest in a new edging press.

The purpose of this study was to investigate registered nurses experiences about the current model for triage at the emergency department at Uppsala University Hospital. The study is descriptive with qualitative approach. The data collection was made in the form of semi structured interviews. The interviews took place at the emergency department. The sample consisted of eight registered nurses with varying work experience of emergency care.

Evaporation is a part of the chemical recovery department at wood pulping mills. The purpose of evaporation is to remove water from the black liquor, which makes the liquor combustible. The process is very energy demanding, and having a well-functioning model of the system is of greatest interest. The model can then be used to study energy consumption and to test different control strategies. Two models have been developed during the master thesis.

Today's labor market is characterized by flexibility. This applies to organizations, forms of employment and working time. Unregulated working time is such an adaptation and the main subject of this essay. The purpose of this study was to investigate the conditions that underpin unregulated working time, in relation to the Swedish legislation and to EU legislation. The intention has been to investigate the work environment impacts of unregulated working time, and what differences there are from a gender perspective.The conclusion is that workers who enter into agreements for unregulated working time have significantly different terms from traditional workers.

The project has been done in cooperation with Schenker Åkeri AB in Sweden, Halmstad. Theproject is based on an inspection made by Arbetsmiljöverket, where they found minorshortcomings with distribution of goods for the employees. The project is an investigation ofthe drivers? working environment.Schenker Logistics is one of the world's leading providers of integrated logistics services.Schenker Åkeri AB is a subsidiary to Schenker Logistics and transports 2.4 million tons ofgoods yearly.The project started with a background study to evaluate drivers working environment. Wehave studied goods receptions, the working environment, strain injury and injury mechanisms.Methods used was observations, tests, questionnaire surveys and ergonomic andbiomechanical calculations.One result of the study is a Working Model, which gives recommendations for the maximumweight a driver should push and pull.

Fewer and fewer people from the age of 60 and upward are still in the working life according to a working survey from Central Bureau of Statistics. Only one of twenty can consider retiring after an age of 65. According to another survey that National Insurance Administration put through year 2000, just about 40 % of the working population desires to finish working before an age of 65. This trend towards lower seceding age seems to continue. There are number of factors that seem for lower retirement age and others for a higher retirement age that we prove in our study.

Nowadays the majority of the thinnings made in Swedish forests are done by machines, harvesters and forwarders. The most common model in thinning with a harvester is strip-road operated thinning and stand-operated thinning with one intermediate passage between the strip-roads. This study is a time study with some quality follow ups on a strip-road operated thinning model, a stand-operated thinning model with one intermediate passage between the strip-roads and a stand-operated thinning model with two intermediate passages between the strip-roads. The machines in the study were a small harvester (Forestline MPM C90) and a medium sized forwarder (Timberjack 1110). The study was made in Litsnäset outside the city of Östersund in Sweden and was made during the autumn 2007. In a lodgepole pine stand six study units (0,6 ha) were thinned with the three different models, two study units per model.

In order to evaluate the benefits and costs associated to investments in information technology (IT) managers need to be aware of the complexity in the nature of the task. Hence all the benefits that arise from the investment are not of pure economic character. The complexity of the task is even more obvious when managers also need to prioritize between a number of possible investments in order to fit a given budget.Stora Enso Skog AB is about to implement a new administration system to the organisation and due to that they will also implement a new standard system for the production planning process. In order to seek the modifications in the standard system that needs to be done to fit the organisations way of working, the managers have put together a reference group to seek out these modifications.The aim with this report is to identify a model that can prioritize these suggested modifications and test it practically with a group of future system users. The first part of the report is a literature study to map the existing models that are available.

There is a great need to reduce nutrient leaching from arable land into lakes and oceans. By using several different types of models it has previously been possible to describe nutrient losses in a catchment area with a minimum unit of sub-catchment level. At present, it is instead desirable to model a smaller catchment with an opportunity to re-connect the results to the corresponding fields in the catchment. Such models already exist but they are not fully able to properly describe Swedish conditions and land characteristics in our region.With the approach of creating such a model, SLU has developed a project with this work as its first stage. The model is expected to be created under the working name SWE-model which stands for Soil Water Environment and is in this first stage supposed to apply the SOIL model in catchment scale. During the procedure to describe the first step in the process of developing such a model adapted to Swedish conditions and which works in the catchment scale with an area of about 10-30 km2, focus has been set on calculating the transport of water flow from different hydrological response units. Regardless of the processes occurring in the soil after the water has been added, it is assumed that all the water which flows from each simulated unit is drained.In the first step the hydrologic response units were identified based on land use and soil type in the study area. With the help of a script with functions that retrieve and transform data, certain units were chosen for simulation. The script was also created in this project. Finally, the model results were aggregated and summarized for each unique unit, for each sub-catchment, and also for the whole catchment.From the results it is possible to see similarities in the flow dynamics between modeled and measured data. The efficiency coefficient has been calculated to correspond to the mean of the measured values for the whole simulation period. With an automated calibration process the model should be able to perform better. The volume error gives an indication of overestimation from the model..

This report describes a synchronous machine model with magnetic saturation in d-axis, neutralconnection and electrical exciter interface for the transient simulator PSCAD/EMTDC. It hasbeen designed and verified in comparison to the regular machine model in EMTDC.The performance of the model is very good when incorporating a linear as well as a saturatedmagnetising inductance. The dynamic deviation is only thousandths to ten thousandths perunit. By using a cubic interpolation of the saturation curve, the model gives a good representationof the saturation effect. The open source code implementation of the synchronousmachine model gives the possibility to easily adapt the model to specific requirements.The derived model makes it possible to simulate a synchronous machine with its excitationsystems, e.g.

The aim of this master thesis was to create a dynamic model for the processes in a solid fuel boiler of the moving grate type. Another aim with the model was to keep it as simple as possible but still able to catch the dynamics of the processes in the bedplate of the boiler. The creation of the model had its origin from drying and combustion equations used in earlier modeling work of boilers. The represented model has been used to simulate different kinds of disturbances in a boiler and different ways to control the boiler. These tests show that controlling a number of parameters in the bed of the boiler is an effective way to keep the grate stable during disturbances.

This master?s thesis describes the development of a model of the catalystsystem aiming at control by an MPC. A well functioning model, which is suitable in control purpose, is important while emission legislation become more and more hard to fulfill for the car manufacturers. Much research has been done in the field of physical modeling of the system, but in this work a linear adaptive time discrete ARX-model is developed and validated.The systems tendency to change its dynamic during usage implies that the model must be adaptive. The developed model proved to be well functioning and shows promising conditions for the MPC design.