This study aims at norming a new objective method to track and measure jaw movements in 3D (three dimensional) during chewing in the young adult population (n=41, age 22-30). Norm values of the range of movements and the duration were calculated. Intra and inter rater reliability was high. Masticatory efficiency among participants was evaluated with a two-colored wax, analyzed with picture analysis software. Regression analysis was used to calculate the relationship between movement and duration variables and masticatory efficiency.

The aim of this essay is, with reference to a close study on the negotiation delegations of the Tenant Association, to examine the principals of democracy in relation to distribution of power and participation, efficiency and professionalism. This is done with the intention to understand the Tenant Association's view on its own commission as negotiator, according to democracy. The investigation is carried out on the Tenant Association in the Swedish cities of Stockholm, Malmö and Gothenborg.The data acquisition was obtained by using a questionnaire and through interviews with representatives from the Tenant Association negotiation delegation.A central conclusion from this investigation is that the representatives of the Tenant Association generally are satisfied with the democracy model used in the organisation, despite awareness of the fact that there are some failures with representation amongst younger people, women and immigrants. Also, they suggest that the model with representative democracy is by all means the most useful because of its arrangement and efficiency in decision making processes.The policies of the Tenant Association, considering distribution of power and participation between elected representatives and employees, are legitimated by the negotiation delegates. However, there is obvious discrepancy in the look upon their respective tasks between the delegates and the chief negotiators.One can recognise the development of democracy that is called New Public Management in this survey.

In the current situation a big part ofthe settlements that exist in Sweden isin need of renovation and energyefficiency in order to survive.Therefore, also many of the older houseswith a wooden structure are in a need ofenergy efficiency, which can be done ina variety of ways, including addinginsulation.This project deals with whether the useof a diffusion barrier or a vaporbarrier affects a wall structure byadding insulation to an older house witha timber frame. The insulation materialswhich are concidered in thisinvestigation are mineral wool and woodfiber insulation. Efforts are focused onthe effects of moisture on theseinsulation materials.To demonstrate the differences thatarise the moisture measurement programWUFI have been used to simulate avariety of wall designs. These designsare developed in consultation with theconstruction carers who are active inthe industry.Using WUFI graphs illustrating themoisture levels of the wall structureswere obtained and from these conclusionsvould be drawn. The work demonstratesthe differences that arise when using adiffusion barrier or vapor barrier inwall construction.

The purpose of this thesis has been to determine experimentally how good a peltierelement is to convert waste heat from wood burning. Three different peltier elementswere used in a comparison study. The comparison was mainly done to know howmuch power could be obtained from each element. Even, a circuit with a step-upfunction has been created to give a higher output voltage than the peltier elementitself. The result of the experiments was a low output power, the highest valuereached 2.18W.

Bachelor Thesis Music & Event Management School of Economics at Linneaus University of Kalmar, Economics, 2FE40E, Spring 2013 Author: Johan Hagelberg, Sofia Prins & Oskar Sjögren Supervisor: Petter Boye Examinator: Thomas Karlsson Titel: Det svåraste som finns är att tänka i nya banor - En studie kring personalhantering och effektivisering av arbetet på svenska musikfestivaler.Purpose: The purpose of this study is to investigate how different music festivals in Sweden can work to increase the efficiency by managing the workforce and internal knowledge.Method: The study was based on a qualitativ method with an abductive approach. The majority of the data comes from qualitativ interviews with persons in the industry.Conclusion: The music festivals in Sweden are acting under a constant economic pressure which leads to an experienced need for a larger workforce - mosty non-profit. The result of this study shows that the larger workforces are both unmotivated and decreases the effeciency of the work. The study aims to highlight the diffrenses between non-profit and commersial festivals and the way they work with human resource management and personal in different levels of the organization..

The constant need of energy is something that affects us all no matter our current situation. Whether we are driving our car to work, taking the elevator or using the oven to cook dinner we end up relying on energy. Our whole society is continuously striving to achieve a higher grade of efficiency and the process of supplying ourselves with energy is no exception. The importance of appliances in our everyday life cannot be exaggerated and thus the importance of their high efficiency.Efficiency is already a keyword in the appliance industry with labels, stars and numbers helping us choosing the most suitable option for the task ahead. No matter how efficient appliances often use pure electricity as their energy source.

Efficient energy use in the housing sector is crucial for achieving a sustainable society. The expansion of this sector only represents a fraction of the existing houses, hence it?s within the existing houses the potential for energy savings lie. This potential has been analyzed in order to determine if it?s possible to cut the current energy demand in half.

A large cost at the construction sites today is the labour cost of the workers. But unfortunately the worker potential is not used to full. It is not unusual to take into a count with a work-­?place-­?additional-­?time of 50% in some cases. By increasing the workers' motivation and responsibility for their tasks may reduce the time considerably, which also increases the potential for greater gains in construction projects.By using the situational leadership may the workers level of maturity develop entirely.

This thesis presents my work at the company Fatshark AB in Stockholm. My supervisor Rikard Blomberg, who works as a chief technology officer at Fatshark and is one of the owners of the company, explained that they had experienced weaknesses in the methodology used when developing heads up displays (HUD) for their games. In the latest production, Lead  and Gold, the HUD had been redesigned a number of times, becoming an unnecessarily big expense due to the number of work hours invested. In modern software development, an iterative workflow is commonly encouraged. Despite this fact, the work efficiency could likely be increased by setting up guidelines as a help in the process of developing HUDs and reviewing the solutions.

As a result of globalization, multinational teams are being more frequently used in today´s businesses. This specific type of team can be described as heterogeneous when it comes to nationality and linguistics. The aim of this study was to explore the concept of multinational teams. This was made using culture as a main concept, and nationality, linguistics, and organizational culture in order to describe it. We intended to say something about how this type of team´s efficiency; when it comes to satisfaction and performance; was affected by national and linguistic heterogeneity within the team.

Forest fertilization had its peak in the late 60´s, when almost 200 000 ha was fertilized annually. The silviculture of today has high demands for timber production at the same time as the demand for nature conservation increases. It means that it?s necessary to produce more volume in smaller areas in the future. The use of DGPS equipment has in modern forestry in Sweden become more and more common.

This thesis is performed in collaboration with Kraftpowercon AB in Surte, Sweden. Focus has been on to identify the powerlosses in one of Kraftpowercons halfbridge DC-DC converters. First theoretical calculations are made, the calculations is verified with measurements of six different operation modes. In a later stage, methods like soft switching and synchronous rectifying are proposed to increase the efficiency for the converter. To achieve softswitching for the halfbridge, the LLC resonant converter topologies are implemented and examined.

The forestry companies? operational planning process is these days dependent on reliable, efficient and user-friendly computer-based support systems. This study is an evaluation of Holmen Skog's current computer-based systems. The aim of this study is to: ? investigate the work pattern of the production managers when using the information system to plan the harvesting operation; ? investigate the efficiency and user friendliness of the information system with the different work patterns and to find the strengths, weaknesses and bottlenecks in the current system; ? find out if the type of object, the volume, the area of the harvesting object affects the time and work pattern; ? examine how this type of study is met by the employees and what factors that is critical to avoid feelings of intrusion. The conclusions of the study were: ? there is a large variation between the work patterns of the production managers and the time spend to perform the operational planning; ? the mainframe computer system used by Holmen Skog is clear, has short response times, is robust and conveys relevant information; ? the computer systems are however divided in many subsystems.

The relatively poor economy in European dairy farming might be improved from efficient feeding systems and dietary management. Increasing herd sizes and transition to loose housing systems in Sweden, increases the possibilities for other feeding systems than separate feeding that is the traditional feeding system in Sweden. Other possible feeding systems are partial mixed ration (PMR) and total mixed ration (TMR), where the TMR system sometimes is associated with overfeeding and thereby increased environmental impact and high feed cost. Diets providing nutrients above or below animal requirements are considered as unbalanced, which in turn are associated with reductions in health, fertility and milk production. On the other hand, a balanced feed ration improves feed efficiency, nitrogen utilization and profitability.

The evaluation of the function of the feeding of sheep herds is suggested to involve the work effort, the fulfilment of the nutrient needs of the sheep and the feed waste. Mechanisation of the feeding can be very simple or include high degrees of mechanisation. Three different farms, representing different levels of mechanisation are presented. Descriptions and analysis of the feeding systems including mechanisation, work effort and estimations of the feed waste are made on each farm. The herd with the most advanced feed mechanisation included a rolling feed band and mix wagon. The other farms were partly or little mechanised including ad lib feeding from big bales and manual distribution of hay and concentrates. The most mechanised farm was able to feed a large herd of sheep at a low work effort and little feed waste. However, the investment in machinery has to be weighed against the improved efficiency.