In the society of today more and more employees are reported sick due to illness caused by their place of work. A lot of employees are stressed in their daily work and because of that they get mentally exhausted. These common occurrences are a part of the psycho-social work environment and it is the employers responsibility to avoid them. To rehabilitate an employee is often very expensive and takes a lot of time. Focusing on preventing illness in the work environment, instead of repair when illness is a fact, is an advantage both for the employers and the employees.The purpose with this essay is to illuminate the responsibility that the employers have to prevent psycho-social illness in the work environment.

Karin Holmkvist (2014) Sleep, meals and physical activity among professional drivers during the day with work and spare time. Master?s thesis in health at work. University of Gävle. Night work and irregular work hours affects social and biological rhythms in activity, eating, sleep and metabolism. Researchshows how theworking conditions andworking hours affect professional drivers´ lifestyle and there is a negative impact on their health.

The report is about efficiency of a current production group where there is no clear production flow and there are some buffers between the operations. The efficiency is done with the help of a tool that is calledWork process of flow production which is used by Atlas Copco CTO. The most obviously results are that the lead time drops from 25 hours to 425 minutes and that the balancing loss decreases from 85 % to 8 %. The report focus on decreasing transports, decreasing buffers, more reliability in lead time and quality. And a more stimulating labour content for the workers is another result..

This thesis describes the universalization, improvement and further development of acompact crane support frame for flatbed trucks. The work has been conducted at Eloch Fordonsteknik AB (henceforth EFAB) in Uppsala.The aim of the work has been to shorten the assembly time of the product. By doingso, the product can be kept on shelf, which in turn results in shorter lead time. Thishas been done by universalizing the support frame to be compatible with most of thechassis EFAB works with. Additionally, the entire construction has been made lighter,which will make it a more attractive choice for customers.A pre-study was conducted and information was gathered internally, as well asexternally, in order to ascertain that no limitation or possibility was overlookedduring the course of the project.One such limitation has been the geometry of the truck bed that the support frameshall be compatible with.

There is a constant change in the world of school, new curricula and syllabi are made and the view of teaching and learning is changing. The desire to improve maths teaching in Swedish schools is strong, especially by laboratory work. How is it then that several teachers in our schools are still using the traditional way of teaching mathematics, which I consider to be relying a lot on the textbook and work for an automated approach?The purpose of my study is to investigate how three different math teachers on an F-5 school in the southern Stockholm area, choose to work with mathematics and why they choose to work according to a special approach. In order to obtain the information I seek, I have chosen to use the qualitative method to get a better understanding of my results.

Many organizational changes have been accomplished in elder care since the 1980's and many of those have been influenced by market mechanisms. The purpose of this study is to examine how the implementation of these market mechanisms has affected three important aspects in the work situation for personnel. These aspects are, demand, control and support. To attain the purpose of this study, five qualitative interviews with home care personnel have been carried out. The interview material has been analyzed and structured with the help of Karasek and Theorells demand-control-support model.

Since reading difficulties is a growing problem in Society and a problem that hinders Children to take an active part in every day life, I wanted to investigate how the School Library can be an educational resource for students with reading difficulties. Using qualitative interviews, I have gained insight into how three school librarians and two teachers work with Students with reading difficulties at two different Schools.The Respondents feel that they have the Knowledge necessary to work with students with reading difficulties, but Wish they had more Resources in terms of Time and Staff to help Students achieve School Goals even better. There are always new assistive technology for Students with Reading Difficulties, and an important part of the Educational work of the School Library, is to be informed of the Facilities available and how they work. I show, in my Research the importance of cooperation between school libraries and teachers to provide the students with reading difficulties the love of reading and work to promote reading. It is important that the School Librarian is an integral part of the School's Team to take full advantage of every opportunity to help the Reading Impaired Students with Information and finding the right Reading Level.

No accidents or injuries should occur because of our public health care. It should be a place with high security and good quality in order to avoid this type of accidents. This is a tough situation when the public health care organization should have as good quality as possible despite savings. It is difficult for middle managers to improve patient safety in the absence of money.The purpose of this study is to explain the work with patient safety that middle manager perform during saving times. The perspective we will look into is how they work with patient safety as an ongoing change.

This master thesis concerns the occupational safetyenvironment at Outokompu Stainless, Avesta Work.The study is of a sociotechnical approach wherehumans are involved and interconnected in the samesystem with technology and organisation. In order toreach the corporation?s goal of zero accidents with losttime injury, the work of improving and maintainoccupational safety and health has to regard behaviourand cultural aspects. The aim of this study is todescribe the safety culture at a specific production unitand research what work which has to be done in orderto change and improve the safety culture at AvestaWork.There are several opportunities for improvementpointed out in this paper and here are some mainresults presented. First and foremost, the concern ofsafety among blue-collar is often secondary due toproduction.

To maintain production in high salaries countries and strength in competition against other companies, it is today more important than ever to maximize production, offer a wide spectra of products and be able to deliver on the customers desire of shorter and shorter delivery time. Flexible production and short time spent on die changes is vital to achieve these desires. The interest for die changeover time reduction grew in the same pace as the demand for increased product variety grew. SMED as a method of reducing time spent on die changeovers were developed in between 1950-1970, by the Japanese Shigeo Shingo.The purpose of this thesis work has been to investigate the result of SMED in a die casting facility, and compare the result from it with the result considering time spent on die changeovers when investing in new equipment. The goal is to implement a thorough investigation by using the SMED method at Tenhults Pressgjuteri AB and make a brochure that have to be simple to understand, in purpose to draw interest to the advantages of using SMED as a method.Commissioned by the Swedish foundry association Swecast, the work has been carried out by studying die changeovers at Tenhults Pressgjuteri AB, where filming and interviews with the operators have been included in the analysis.

This master thesis studies how much the cycle time, i.e. the time it takes for an industrial robot to perform a given task, can be reduced if an extra degree of freedom (DOF) is added to the robot system. The extra DOF consists of a linear track, which is supposed to be used in an optimal way. The problem has been studied using simulations in the robot simulation tool RobotStudio. To be able to run an optimization in Matlab, with the RobotStudio simulation cycle time as the object function, communication between Matlab and RobotStudio has been set up with an interface written in Visual Basic.

An airline company that operates with its fleet needs to ensure that maintenance of a following and certain standard will be implemented. In this project we have sorted and divided the various working procedures of Malmö Aviation into Work Packs. These procedures are mandatory and must therefore be implemented in order to keep the aircraft airworthy at any time. Our task was to optimize and sort these working procedures by zone, panels, access and down time. We have created a maintenance program which Malmö Aviation can use and we have sorted their working procedures in B and C- Checks.Maintenance procedures that did not fit into our Work Packs have been gathered and sent back to Malmö Aviation for further inspection.This project has required a lot of extra reading in manuals and we have had a great insight into the complexity of a technical organization such as Malmö Aviation..

Simulations of simulink models using Kalman filters are often very time-consuming. This problem depends mainly on the fact that the Kalman correction has to be performed at each sample instance through the whole simulation. The goal for this thesis work is to reduce that time-consumption for the filtering part (the integration partis treated in a complementary report) of a simulation. Furthermore a Matlab routine to perform parameter tuning and finally a graphical user interface is developed.The filtering part of the simulation in this thesis is based on an Extended Kalman Filter (EKF). The time optimization of this filter considers searching for the possibility to replace the today?s existing Matlab functions that is used to perform the filtering calculations.

My work is based on a text analysis of media production of the female offender. I found it interesting how women were presented as victims rather than perpetrators. The media have in recent years grown tremendously and this also impacts on people and what is important. The notion of how a woman should be and how a female offender should be is extreme. The material for my work is articles found on the Internet in daily newspapers websites.

This report focuses on work schedules in the retail sector, where work schedules are dynamic and change according to the needs and work schedule is a requirement for an effective structure of the work. This structure is important for maintaining a good order and all this is a requirement for a profitable business for both long and short term future. Work schedule also contributes to safety at the workplace. The purpose of this study was to investigate the transfer of knowledge by work schedules. The HRM employee we interviewed worked in Reitan Servicehandel Sverige AB which includes 7-Eleven, Pressbyrån and Shell.