The development of productivity in the construction industry has long been at a steady state compared to the manufacturing industry. Studies have shown that, amongst other things, waste on construction sites can reach up to one third of the total production cost. This has been observed from different aspects, and change is forthcoming.This thesis aims to provide a foundation for an increased productivity at production sites of building bridges. It is primarily based on a field study at Skanska, at a bridge construction site near Grängesberg. Via continuous interviews with the whole production crew, construction workers and management, information on interference and possibilities of improvement at the work site has been documented.

The purpose of this paper is to examine the effect that price has on quality expectations and customer satisfaction and how price fits into a customer satisfaction model. An experiment in which participants are subject to scenarios of a high or low quality flight are used to test the hypotheses. The analysis shows that perceived quality has a bigger impact on satisfaction than price. Furthermore, price and quality do not affect customer satisfaction independently of each other. The importance of value compared to quality changes whether the actor is a high or low price actor.

This paper presents a project and literature overview about how risk management and quality sometimes goes hand in hand and sometimes in two different directions. Meaning that the risk management can affect product or process quality differently depending on what risks an organisation chooses to control.The purpose with this paper is to get a deeper understanding about how risk and quality works together with IT-support and therefore we have been actively participating in a project with a risk management company called Zert. A literature study and a qualitative interview study have also been undertaken to see what the customers and the other researchers have written, to be able to make proper conclusions on the subject.To easily work together and get the information that was needed, four methods where used. Besides the qualitative interview and literature study the think-out-loud, card sorting and a variation on the extreme programming method where used to help visualize and improve communication both with Zert, the costumers and among ourselves.Zert is a risk management company that helps other organisations to control their different types of risks that they might be taking, by offering a system where the risk management process is held and providing consulting services by helping within the processes. Both Zert and their customers see the communication, knowledge and teamwork as something important as well as the quality within the work, processes and the end result.

AimThe aim of this study is to through managers in eldercares deskriptions of the systematic qualityleadingsystem examine the implementation process of this system in the eldercare in the municipality of Halmstad.  BackgroundIn this paper the background explains elderly care and social work context, leadership in change and implementation processes. The theoretical frame illustrates Vedungs implementation theory and Webers model of bureaucracy MethodTo collect empirical data for this study, a qualitative research design was used in which eleven managers within Halmstads municipality home care management stood as respondents. ResultThe respondents highlighted a variety in the use of the systematic quality management system tool. The result describes that several obstacles were experienced in the use of the systematic quality system. ConclusionBased on the descriptions the respondents gives of the implementation process of the systematic quality management of Halmstad municipality home care management, the conclusion can be drawn that the implementation process has not resulted in the employees making use of systematic quality management in practice. The systematic quality management system that will ensure the quality of the care work is thus used to a limited extent..

Upon marketing the system in Europe and the USA cost savings generated from reduced work force have been prevailing. Since the cost of labour is much lower in the Asia Pacific region other factors have to be stressed. The parameters of flexibility and quality assurance may however cover any initial investment in a production system. Our purpose is to value flexibility and quality in a manufacturing context, applied to DAS, in order to use it in investment calculations. In order to make an adequate estimation of different companies, due to problems associated with acquiring correct figures, the Key Success Factors needs to be examined so that the gathering of numbers can be conducted with more focus.

If Swedish companies are to compete with companies in low-cost countries they have to achieve a more efficient production. The purpose of Total Productivity Maintenance (TPM) is to increase the company's profitability by increasing the productivity. TPM is a method that involves all employees and aims to prevent failures in order to increase the availability of existing equipment.The aim of this paper is to evaluate the implementation process of TPM and give recommendations for the further implementation process. The conclusion and the analysis are based on a case study done at a production department at ABB Cewe-Controls facilities in Nyköping. The case study consists mainly of qualitative data from participation observations, surveys and interviews.Commitment of the management is a key factor in the implementation process of TPM.

The purpose of this assignment at SSAB Tunnplåt in Borlänge was mainly to investigate and describe the circumstances for the spare parts stored in storage facilities within the area of operation. Even new facilities which could serve as storage rooms and their opportunities for storing spare parts were an important part of the investigation. This because of the need for improved storing of spare parts. Furthermore, market offers where reviewed for storage of spare parts in more tailored designs. The work will culminate in proposals for improvement which is of importance for the development surrounding the storage and handling of spare parts.

Having an ileostomy can affect the quality of life. Quality of life is defined by Siri Naess as being active, relating well to others, having self-esteem and having a basic mood of happiness. The nurse?s task is to focus on the stoma care and work in a holistic way. The aim of the study was to describe how adults with permanent ileostomy experience their quality of life.

The existence for companies today consists of constant challenges with customers that want more individual products with high quality as quickly as possible. For a company to be able to have a short delivery time, it must also have a short production time. This makes streamlining and improvement of processes a big part of a company?s workThis thesis has been carried out together with the company Lasermax Roll Systems AB, a world-leading manufacturer of feeding, finishing and monitoring systems for high-speed digital printers. They manufacture their products according to the assembling for costumer order principle.The purpose with this thesis is to map and analyze, the assembling process and the test process at Lasermax Roll Systems AB.

The purpose of this thesis was to illustrate the use of internal marketing in the hotel industry. It was decided to conduct a case study on two hotels in the same region, Quality Hotell Statt and Pite Havsbad. The case study is based on personal interviews with the managers of each hotel, who have the ultimate responsibility of the internal marketing work. The research questions were based on why the hotel industry work with internal marketing and how the hotel industry work with internal marketing. The study showed that the hotel industry work with internal marketing on daily basis to get low employee turnover rates, increased employee job satisfaction and high quality services.

Bakgrund: Kvalitetsutveckling inom vården pågår i hela världen. Internationell forskning indikerar att förbättringscoacher kan vara en framgångsfaktor i förbättringsarbetet. Det är i dag oklart hur man kan utveckla interna coacher till att stödja kontinuerliga förbättringar. Studien utvärderar ett lokalt, tvärprofessionellt coachprogam inom vård och omsorg i ett geografiskt område i Sverige med en etablerad samverkanskultur. För att främja ökad kundcentrering ingick en pensionär i programmets planeringsgrupp.

ABSTRACTProblems with high turnover in nursing has escalated during the last years both nationally and internationally. according to previous research job satisfaction and quality of care was connected to specific features of the hospital work environement. It was also recommended by Coomber & Barriball (2007) to analyze job satisfaction at ward level with qualitative interviews to get a deeper and more extended insight in which specific features are of importance.The aim of this study was to investigate and describe the experiance of job satisfaction in relation to quality of care from nurses perspective. This study was carried out at an orthopaedic ward with primary nursing as organizational context of care.Two focus group interviews were conducted, they comprised nine nurses with at least two years experiance of primary nursing. A qualitative content analysis with inductive approach was used in order to develop more detailed insights of potential factors influencing work satisfaction at ward level.

 AbstractTitle                                      Continuous improvement ? Motivating ICA´s  personnel to    a greater engagement.Problem                                  Getting ICA: s employees involved with continuing improvements.Purpose                                  To motivate ICA: s employees to a higher degree of commitment and    contributing with ideas and embracing approved improvements. Research questions   - How should the employees be properly motivated to contribute with   suggestions for improvement?  - What message and content should improvements send to inspire the   employees? - Witch channels should be used to capture the employee?s attention? - How can best practice be recognized and how can the knowledge be spread  through the organization?Methodology                          Initially a theory study was completed and from the results a case study were  conducted.Conclusion                             Combining success factors for continuing improvements.  To get the      employees feeling appreciated with their work. Results             By combining ten sucessfactors and trying to see the whole picture.                .

This thesis work was made to optimize the writing of the construction specificationsat FKA. These construction specifications are created before each plant modificationsthat is started because requirements from the Swedish radiation safety authority(SSM) and internally on Forsmarks nuclear group as constructions / implementationdocumentationThe study was done through seven interviews of two people at three different groupsinvolved in the construction specification and an interview from the group accreditedverification. The four selected groups were selected through an extensive analyticalwork resulted in an elimination matrix where these four groups was considered to bemost involved with the construction specification.The questions asked to these individuals were based on the instructions and sampletext that are described in the construction specification. To ensure the quality of thethesis were to limit itself to the chapters that were considered most relevant toimprove. The analysis revealed a number of points that should be improved, partlyinto the routines when writing the construction specification and when ether sampletext or suggestions should be changed and complemented.

This thesis work has introduced process orientation at the printing company Color Print Sweden AB. The outcome ofthis work is a survey of the work flow at the prepress department. To visualise the production process at the companya comprehensive mapping of the main process, order-to-delivery, has been made. The work has detected a couple ofcritical elements in the existing process. These elements are the following: initial check of material delivered to the prepressdepartment as well as the control made of the plotter print-out, digital test print and plate.