The study aims to increase understanding and knowledge of motivation; this by examining how the leader experiences her capability to promote employees' work motivation. Also, how employees perceive that the leader influence and enhance their work motivation. Interviews were conducted with a manager and two employees of a government agency in Sweden. The results demonstrate different opinions between manager and employees in the manager's ability to foster motivation in the everyday work. The leader thinks that she promotes her employees work positively and believes that she is giving her employees attention and appreciation.

Sweden?s tourism increases and new hotel opens. Since 1978 to 2011, the hotel rooms in Sweden doubled. International congresses, sports- and artistic events are a few examples of what affects the hotel industry. Sweden is seen as an attractive destination and future forecast looks to have a positive trend.

To invent an optimized product is a complicated process. This process is only half of the work. It is equally important to develop a production system that can produce the product in an  efficient and ergonomic way.After several evaluations of conceptual and detailed drawings a final idea has come to light.The idea intends, to the maximum extent, utilize the facility in a more efficient way through moving assembly lines and stations closer to the flock section and the stock for complete products. To make the production better, stations are placed in more logical places given the assignment they are supposed to accomplish. This improves the material flow radically.

This thesis is a feasibility study into how Fresenius Kabi may rationalize their destruction process in regards to cost, recycling, and work environment. The two main objectives are to identify scrap flows and the possibility to improve or replace the equipment that is now carrying out the physical scrapping. The flow has been visualized by a flow chart of the material and communication. A chart of the problem established to visualize where improvements are necessary. Based on the problems proposals are presented on how to improve the flow thru the plant.During analyze of the physical scrapping equipment it was also necessary to take a deeper look at how they are carrying out there work today, how does the procedure look like, working environment and where are the weaknesses.

The main purpose of this essay is to study the role of documentation in Swedish health care today and the consequences of the augmentations in paper work that have taken place during the last couple of decades. The method used in this study is interviews with health care personnel.The following questions are treated:-       What kind of documentation has increased in Swedish health care?-       How is the patient/health care professionals affected?-       How is the work of the health care professionals affected?The conclusion of the essay is that the increasing amount of time spent on documentation that for much part has never been performed before, (such as risk analyses, statistics and writing much more thorough charts), has consequently left very little time for actual patient care. The research also showed that faith in health care professionals has significantly decreased and that one of the major reasons for increased documenting is the anticipation of and therefore protection against potential complaints. Finally there seems to be a greater focus on being service-minded rather than on providing quality health care..

Stress is commonly found in society today. This paper aims to examine how work performance, cooperation and team spirit are maintained in demanding work environments. By studying two departments in a public hospital that practises addiction care, our findings suggest the following: If the experienced stress is mainly connected to challenge stressors, it has a positive effect on work performance. By organising work through mechanistic and organic structure, the handling of qualitative and quantitative stress is facilitated. As a consequence, first and foremost cooperation can be maintained, but also work performance and team spirit.

The aim of this study is to examine the democratization process of Kosovo in the years after the countries independence was assured. Two central questions for the case study consist of whether a democratic improvement in the country has occurred and which factors, positive and negative, are present to further improve or impede the democratizationprocess. The study builds upon two central definitions, democratic states and democratization in order to gain theoretical background to be able to measure these two quite abstract expressions. A socioeconomic model is used to measure favorable or negative developments within Kosovos society and the findings of this model confirms the hypothesis of modernization theory, namely that increased socioeconomic development increases the chance of a positive democratizationprocess. There has been a positive democratic development aswell as socioecomic progress but since the nature of this study is merely descriptive and not explanatory, it doesnt make claims on the explanatory power of modernization theory.

AB Sandvik Cormorant?s production unit in Gimo has identified a need to examinethe handling of products between operations with the purpose of generatingproposals of improvement for the product handling.The aim of this project is to study the existing manufacturing process and givesuggestions for improvement. The proposals should reduce the manual handling ofproducts, decrease the risk of damaging the products during the manufacturing andform a basis for increased traceability. Based on a mapping of the manufacturingprocess and the problem description, a specification of requirements has beencomposed.The mapping of the manufacturing process suggests that a change of the currentsystem is required. The company is recommended to decide how the producthandling between operations should be performed as guidelines for the productionteam.

Construction companies in Sweden have for recent years seen an increase in the numbers ofwarranty complaints associated with the market of resident buildings and the cost for this hasbeen measured to over 1.2 billion SEK per year. Working with poor quality cost as a way ofcreating insight about defects within the company?s processes is a method developed and usedby the manufacturing industry for decades, but have not yet reached the construction industry.This study has been performed in collaboration with a Swedish construction company, wherethe author has been stationed at the aftersales division for residential buildings. Owing tocircumstances, this published report has been made anonymous regarding the company whowill further on be namedthe Company. The Company is aware that warranty claims producegreat costs and has requested a way of putting cost and cause to specific claims in order ofreceiving a more specific cost view and to make the reuse of knowledge more efficient.

The accident frequency in the construction industry has shown a downward trend every year but this trend was broken 2010th. It is often lack of precautionary measures within work environment and safety that is the cause of accidents. The big construction companies understand the importance of precautionary measures within work environment and safety, as they spend a lot of money and time on that matter. By examining the work environment and the safety of the small construction companies you can see how they work. The report will presents how these small companies work with work environment and safety, and also how they follow the safety instructions that are available and how they make use of safety equipment.

The paper is a thesis made by three students in the engineering program at Jönköping School of engineering. The thesis was overseen by the urban planning office and features data from Jönköping County.The purpose of the thesis is to improve future central districts by improvement of work methods. The aim of this thesis is, through an evaluation of process mapping, develop a model for systematical work methods with better experience feedback in the urban planning. The following three questions have been answered:? How is the process mapping of the urban planning in Jönköping County built today and how did it affect the current district Kålgården?? How can the urban planning of Jönköping improve with a more systematical work method with better experience feedback?? How can critics elaborate the developed method to make it enough stable and in general applicable method to enforce on future districts?Literature studies and interviews were made to review the work methods of the office of urban planning as well as how their experience feedback works.

This examination work brings up opportunities to invest in a construction for heating with grain or pellets on farm level. As example we have chosen Fröberga Gård which is a farm located in Östergötland outside of Söderköping. The farm`s residential buildings is to day heated with oil and electricity. The result of our investigation shows that heating with grain is the best alternative, partly because of economical issues but also because you can grow the grain on your own farm and by that you can get better economy in your seed cultivation. To grow 16 tonne of grain as is needed demand gives a insignificant increase of work. Further an advantage is that no investment in machines is needed because all the machines witch is needed already is in use on the farm. In a situation where a new investment is needed as in the case we studied, is it often profitable to invest in a integrated furnace. Because all the components are well adapted to each other, and because that gives a high efficiency. If you already own a well working furnace is it often most profitable to connect a burner to it. It is important to know that heating with grain need more work than heating with pellets, because the high contents of ash in grain. Even if you choose pellets instead of grain the calculation shows good results. Because peat is an excellent but fairly untested raw material for pelletsproduction we have chosen to watch little more on its quality and conductions. We discovered that peat has a high heating value which makes it possible to raise the heat value in pellets through mix up peat and wood. Or you can make pellets with only peat and get a pellet with high heating value. Even the calculation with peatheating shows good results..

A new phenomenon on the Internet is the online audience response. Mentimeter is a web-based tool where you can create online polls. The users can then cast a vote and the result is shown in real time. We want to test the information visualization in Mentimeter and we base our hypothesis, that a better graph design is possible, on the work of Edward Tufte and Stephen Few. Edward Tufte is an emeritus at Yale University, where he held courses in statistical evidence and information design and has created theories about how visual information should be designed.

The view on which kind of fiction that should be mediated to the public through the Swedish public library system has since the late 60´s been dominated by what in this Master?s thesis is called: ´the discourse on quality of literary fiction´. The aim of this thesis is to examine to which extent this discourse still plays an active role in the Swedish public library system or if that discourse has been replaced by a more market-led, demand responsive view, where the features of ´quality´ and ´culture´ have been downplayed and replaced by a ´customer?s service view´ on how and why fiction should be mediated to the public. The methodological and theoretical perspective in this thesis is led by the understanding of the discourse analysis in Michel Foucault?s ´The Archaeology of Knowledge´.

The report is about efficiency of a current production group where there is no clear production flow and there are some buffers between the operations. The efficiency is done with the help of a tool that is calledWork process of flow production which is used by Atlas Copco CTO. The most obviously results are that the lead time drops from 25 hours to 425 minutes and that the balancing loss decreases from 85 % to 8 %. The report focus on decreasing transports, decreasing buffers, more reliability in lead time and quality. And a more stimulating labour content for the workers is another result..