Chunks and Tasks is a programming model based on the C ++ programming language. This programming model is used for electronic structure calculations, among other things.The purpose of this project is to improve the CHT-MPI software library for Chunks and tasks, so that calculations of matrix-matrix multiplications are performed more efficiently than they do with the existing software library. The software library is based on the work stealing method, which is a method the software library for Chunks and Tasks uses for the distribution of the calculation work. The considered way to improve the software library is by modifying the work stealing method in a way that makes the distribution of calculation work happen in a more efficient way , which will lead to calculations performed faster than before.Two different modifications of the work stealing method were tested and it led to two new methods, Method 1 and Method 2, which distributed the calculation work differently. Method 1 did not give results that were compatible with the theory, since the calculation time with this method was much longer than the previous method.

Volvo Penta has been producing boat engines since 1907 and are world leading in this seg­ment. They have today an extended range and also sell industrial power stations. Quality, safe­ty and environmental care are three core values for Volvo and together they strive to give their customers the right product with the right quality.Volvo has developed a production system named Volvo Production System, VPS, and one of the pillars is continuous improvements. Within this pillar you can find value stream map­ping, which is used to analyze the value stream through the process. This tool gives a wide perspective and helps to keep focus on the entire process instead of just parts of it.Volvo Penta in Vara has earlier done value stream mapping but without good results since they didn?t take set-up times and imbalances in account.

This thesis investigates all aspects of quality and evaluation issues concerning collections of Internet links in public libraries today and in the future. We have studied central theories concerning quality in general as well as quality aspects regarding the Internet and Internet links. In addition to this we have made three case-studies involving the development of collections of Internet links in public libraries of different sizes. The case-studies were made as interviews with professionals responsible for selection, quality assurance and evaluation of electronic information for inclusion in the libraries collections of Internet links. In addition to this we made an e-mail interview with a librarian responsible for one of the most advanced collections of Internet links among Swedish´ public libraries.

The purpose of this article is to examine issues concerning quality assurance in the Swedish family counselling. To obtain the purpose following factors have been analysed: what kind of requirements/criteria are put on the companies/practitioners, what the respondents think about the lack of common standards and criteria and their opinions concerning ?Lagen om valfrihetssystemet?. Monitoring of criteria, privatisation and increased competition are other factors that have been analyzed. The material was obtained from the family counsellors own association and was analyzed in the light of previous research and theories regarding the quality of family counselling however we also considered theories about quality within social work in general.

A degree thesis about quality control and assurance in construction. Made in cooperation with Wästbygg. An analysis was made of the self-monitoring control that is conducted during the construction. The data was collected from interviews from personnel employed by Wäsbygg as either work-leader, project-manager or quality- and environmental-coordinator. During the study there was also a review of the literature in the subject.

The objective of this thesis is to map the resources and methods used at the department OPPC, at AstraZeneca, and derived from that give suggestions on possible solutions that will increase their productivity.Mapping of the product flow, as well as gathering of process data, has mainly been done using observations, but consultation with the process technicians has also played a great role. Further have theoretical methods been used, based on literature studies, within the areas of Lean production and statistics.The work has incrementally gone forward since the steps taken has been restricted by the irregularity of production which led to the need of creating a fictive production flow. This has affected the lead-time calculations in the way that they are meant to give an indication, rather than an absolute truth, on how different methods described shall be used.The current state analysis showed multiple areas of improvement when defining capacity as value adding time in relation to total throughput time. Using the "standard scenario" as a basis showed that the actual production flow only constituted 50% of the total project time. Further it showed that the workflow contained more non-value adding activities than value adding activities, which is a result of how the work is distributed within the department as well as in the different projects.

The aim of this master´s thesis is to analyse what factors have an impact on the quality of school libraries. The research questions are: How do some school principals, school librarians and school inspectors view quality in school libraries and what has an impact on quality?How do they view some existing quality criteria?How important do they think the integration of the school library into the curriculum is?The theoretical approach is derived from research about school libraries by David Loertscher and by Sharon Markless and David Streatfield. The empirical material has been collected through half structured qualitative interviews. The informants chosen are principals and school librarians from three Swedish primary schools (6-15 years).

There are many good reasons to ponder about what it is that makes life worth living. To observe and reflect on what it is that gives a person a good quality of life is arguably the essential core of social-work. The aim of this research was to investigate how 15-year old youths interpret quality of life. The key areas that we explored in order to meet the research aims were: what did the youths interpret as a good quality of life for a 15-year old and for an adult, how did they view their own quality of life, and did they think that the regional context (i.e. if one lives in a big city or in a small town) affects how one interpret quality of life.The studywas based on interviews with four boys and four girls.

Sammanfattning SyfteSyftet med förbättringsarbetet var att erbjuda de äldre på särskilt boende en bättre kost i enlighet med Livsmedelsverkets rekommendationer.Syftet med studien var att beskriva hur förbättringsarbetet genomförts, upplevts och påverkat kosten till de äldre på särskilt boende och kostpersonal i Sävsjö kommun.MetodMetoden för studien av förbättringsarbetet har varit enkäter till alla äldre på särskilt boende innan och under förändringen. Semistrukturerade intervjuer med personal inom kostorganisationen har genomförts och sedan analyserats med hjälp av innehållsanalys. Ytterligare en metod för att utvärdera förbättringsarbetet har varit analys av statistik ur kvalitetsregistret Senior alert.ResultatMed utgångspunkt ur förbättringsfilosofin Lean och Livsmedelverkets rekommendationer har ett antal förändringar för äldre genomförts inom kostenheten i Sävsjö kommun för att skapa en effektivare, mer standardiserad organisation som erbjuder kunderna en kost som är mera anpassad efter deras behov. Vid intervjuerna med kostpersonalen framkom fem områden som har påverkats av förbättringsarbetet: renodling av köken, arbetsmiljö, de äldres upplevelse, matsedeln och Livsmedelverkets rekommendationer. SlutsatserSlutsatser som kan dras av studien är att de äldre redan innan förändringen var nöjda med den erbjudna kosten.

Purpose: The purpose is to examine more closely why the achievement of the environmental goals is so low. To within the thesis work to make this as interesting and with as good quality as possible, especially the environmental quality goal Reduced climate impact, but also Natural acidification and Protective ozone layer, has been chosen to be studied further. Method: A qualitative method and text analysis has been applied. Intervention theory, as Vedung 2009 describes, is used as an intellectual backbone and as a help to structure the essay. The three environmental quality goals correspond cases, or units of analysis. Analysis: The fulfillment of the respective environmental quality goals is analyzed according to its goal, policy instruments, implementation and its effects. To this some of the problems are analyzed that exist on the path to achieve the goals.

In order to measure the quality of the logs, one can with help of Fast Fourier Transform technique get the signals resonance peaks. With help of these peaks you can see whether the quality of a tree is good or bad. This report contains the work of a where a program has been developed to be able to process a vibration created by an automatic hammer hitting on a log of wood. From the processed signal the program should be able to show both the raw wavesignal and the processed measured data from the resonance peaks. Beyond the raw wavesignal and resonance peaks the program should also be able to control the automatic hammer.

Kitron had wishes to be able to test and measure how disturbance affects their vehicle electronic units before they have been verified by SP Technical Research Institute of Sweden in Borås. This work started with the writing of a demand specification together with Kitron for a product PSQS, Power Supply Quality Simulator, which can generate some test pulses according to a standard for electronic units to Volvos vehicles. A design proposal was developed with the help the demand specification and was verified with the help of simulations. All electric schematics was designed with the guide of the design proposal. The pulses realized in the works of this thesis are those which Kitron experienced that they have a need to test in their own premises and which are possible to generate with the means available.

With an increased empowerment of the users, and a dependence on outside critics, one wonders what kind of role the librarians have in a context where qualitative literature is discussed. The aim of this study is to examine the relationship between librarians private and professional views on qualitative fiction, in order to be able to discuss their role as quality intermediaries in a user oriented context.The method used, is the qualitative, semistructured interview. This author interviewed seven librarians from three different libraries in Sweden. The theoretical emphasis partly relies on the ten words of qualitative value that Inger Elam and Bengt Brülde discusses in their respective texts, partly on David Garvins quality assessment theory, which defines several quality categories divided between an absolute and a relative quality view.Through the comparison between the private and the professional quality view, examined with the two theoretical approaches, the analysis of the interview material shows that there lies a complexity in the librarians professional role. On the one hand, they are dependent of both the users and the critics judgements about the qualitative aspect in the work with purchasing new literature to the library.

There are several ways of conducting software testing where some may include users and others may include personnel whose work task is to execute test on systems. Although most developers and project managers understand the point of testing the system, it is not always being done and the most common reason is that there is no time for it. However, this is a false assumption as it may instead cause some bugs in the system that would not have been there in the first place if tests had been there to prevent bugs in the code.My purpose for this thesis was to find suggestions for changes in the development process in an ongoing project used by Acino and Svenska Försäkringsfabriken in order to increase the quality of the system used. In this thesis, I have approached the purpose by pursuing a case study of the two companies through observation and interviews. By doing this I acquired the relevant information to make suggestions for change.

The existence for companies today consists of constant challenges with customers that want more individual products with high quality as quickly as possible. For a company to be able to have a short delivery time, it must also have a short production time. This makes streamlining and improvement of processes a big part of a company?s workThis thesis has been carried out together with the company Lasermax Roll Systems AB, a world-leading manufacturer of feeding, finishing and monitoring systems for high-speed digital printers. They manufacture their products according to the assembling for costumer order principle.The purpose with this thesis is to map and analyze, the assembling process and the test process at Lasermax Roll Systems AB.