The purpose of this thesis work is to evaluate how the physical behaviour of a pipe bend is affected by the pipe bending procedure. Effects such as initial ovalization, thinning, thickening and plastic hardening from the bending procedure are examined and the mechanical properties of pipe bends containing these effects are investigated.This has been evaluated by creating a detailed Finite Element model of a pipe that is being bent. Then the differences compared to a bent tube in a virgin state, so called Elbow elements and an analytical in-house program have been evaluated. The virgin state refers to a model of a pipe that is bent from the beginning, thus having a homogeneous thickness and not containing any plastic hardening. The Elbow element is a calculationally cheap element, specially developed for accurate calculations of pipe bends in an initially virgin state.The goal with the thesis work is to get a better picture of what happens to a pipe as it is being bent, how this affects the mechanical properties and to evaluate the possibility to develop an easy method for taking these effects into account when using the Elbow element.This report describes the layout of the work and how the detailed FE-model has been constructed.

Flooding events are no longer rare, floods occur all over the world. Accordingly, it is vital for the society and different authorities to work with flood mapping. To meet the goal of Uppsala kommun to map the risks of floods in Uppsala län, a map of the different areas around Funboån which are inside the area of risk for flooding have been developed.In the work, cross sections and the water flow have been measured. Moreover, an echo-sounding have been carried out in Funboån to map the bottom topography. From the bottom map and laser scanned data covering the study area, a terrain model was created.

This study deals with one of the most discussed work environmental issues in the modern society of Sweden today - work related stress, its causes and how stress can affect people in their working situation. Our study is based on a questionnaire among aid handling officers in two municipalities of the middle of Sweden, and two interviews with their directors. We found that aid handling officers has a complex occupational role. We also found that the officers in these two municipalities experiences about the same level of stress.Further in the study, we will deal with whatever could be the cause of the stressful situation, using the demand/control model of Karasek and Theorell. The result shows that despite the similarity of the stress experience, the cause was shown to be different.

The background to this report is the author?s ambition to understand individuals? work situation, how it?s formed in interaction between the individual and factors in the work-setting. Such an ambition is well in line with the concept of Human-Technology-Organization (HTO), a cross-scientific approach that puts a system-oriented perspective on how human, technolog-ical and organizational factors interact within work systems.The aim of this report was to explore managers? work-situation and generate an understanding of it from an HTO-perspective by using an organizational model as a framework for an interview guide and to analyze the work situation from an HTO-perspective following the ques-tions at issue:1. How does the managers experience their work situation?2.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

Evaporation is a part of the chemical recovery department at wood pulping mills. The purpose of evaporation is to remove water from the black liquor, which makes the liquor combustible. The process is very energy demanding, and having a well-functioning model of the system is of greatest interest. The model can then be used to study energy consumption and to test different control strategies. Two models have been developed during the master thesis.

This thesis deals with the compatibility between analysis software Revit Structure2012 and Robot Structural Analysis 2012. The purpose is to become more aware ofinformation management models to be compatible across different softwareapplications. The structural model is made to be optimal for the compatibility of othersoftware Aim is also to gain an understanding of the transferring methods that exist,and which method is most convenient to use and to examine whether the methodswork in practice. Objective of this project is to make the modeling processtime-efficient for constructors. Models do not need to be structured in severaloccasions in different software; it only needs an optimal model that transfers properlybetween software.The method used in the thesis consist cases where the transferring process isexamined.

This thesis analyses the cost accounting system KPP and its use within the Swedish health care. KPP is designed to calculate and assign health care costs to individual patients. This would facilitate evaluations and comparisons of the costs for certain diagnosis, patient groups or clinics with a different mix of diagnosis. The study investigates the following questions: 1. Does the KPP-model theoretically work as a cost accounting tool for health care purposes? 2.

Foreign invested SMEs have recently become increasingly interested in China. The enterprises are in this report categorized as second wave companies since they follow the footsteps of previous pioneers, of which mostly were larger companies. The ambitions of the SMEs are either to sell products on the ever expanding Chinese market or to utilize the potential of low cost production for global markets. The existing literature is fragmented and solely based on the experience of larger companies. We believe that SMEs are facing new and different challenges, and thus a new generic theoretical frame work is desirable.

The purpose of this study was to examine how the genrebased instruction applied in multicultural classrooms. My observations were carried out in three different classrooms, whit the educators constantly working on language development off the students. Two observations were carried out in Swedish, with a teacher of Swedish as a second language and the Swedish-teacher working with students together. In these two lessons in Swedish, I took away from Pauline Gibbons model, while the third lesson in civics I assumed from Eija Kuyumcu genre model. Both models are based on the Australian research around the genrebased teaching.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

AbstractIt is important to choose which spare parts to keep in stock. With the right spareparts in stock the costs for inventory and production loss will decrease. Cavalieri et al. (2008) highlights that the balance between inventory cost and production loss is underestimated.  It affects the company and must be considered before decision on purchase.The problem with spare engines is that they are all more or less critical for the production. That can be a reason for why no previous research targeting engines and classification of with engine should be kept in stock has been found.

This report describes a synchronous machine model with magnetic saturation in d-axis, neutralconnection and electrical exciter interface for the transient simulator PSCAD/EMTDC. It hasbeen designed and verified in comparison to the regular machine model in EMTDC.The performance of the model is very good when incorporating a linear as well as a saturatedmagnetising inductance. The dynamic deviation is only thousandths to ten thousandths perunit. By using a cubic interpolation of the saturation curve, the model gives a good representationof the saturation effect. The open source code implementation of the synchronousmachine model gives the possibility to easily adapt the model to specific requirements.The derived model makes it possible to simulate a synchronous machine with its excitationsystems, e.g.

Heat and power stations are often in need of optimizations. A simulation model is a tool for findingways to optimize the plant. The scope of this diploma work is to develop a simulation model ofBoiler 5 at Mälarenergi AB. Boiler 5 is a circulated fluidized bed boiler that was taken into service inyear 2001. Among the included parts in the boiler are cyclone, convection part andINTREX-chambers.