This thesis describes the planning and development of a volume meter of pine and spruce cones. The product was designed and developed for Stigsjö Skog och Frö AB in Härnösand. It was developed taking into account a number of requirements set by the supervisor David Zetterlund. The main requirements were that the volume measurement would be fast and give accurate results. These are two requirements that are missing in today's volume measuring method which is very problematic for the company.The plant was visited several times in Härnösand, mainly to discuss the generated concepts with the supervisor and perform tests on the prototype.

Abstract    Objective: The aim of the present study was to investigate if inclinometer estimates of arm posture during paper mill work differed between periods of different arm visibility. The aim was also to identify strategies for and difficulties in assessing body-visibility on video. Methods: The study consisted of two parts, where part 1 aimed to investigate the validity of observation-based assessment of arm posture during paper mill work. Study 2 was a survey among people with experience in assessing the posture of paper mill workers from video. Results: The total time for the right upper arm visibility indicates that it was on average visible in 54%, partly visible 15 %  and not visible 31%.

The project ?Investment proposal for grinding station for service work of screw feeders? has been performed during the spring semester 2014 for the course Bachelor?s thesis for degree of  Bachelor of science in machine engineering at Karlstad?s University. The project has been performed in cooperation with Fiber Workshop which is a service department in the company Valmet AB. Valmet AB is a company that develops and manufacture soft paper tissue machines. The screw feeder is a part that is used to feed, and squeeze out the water out of woodchips.

In Sweden has the temporary agency work industry settled in an explosive way since the deregulation of the unemployment agency monopole in 1993. The demand of civil right for the employer that is rented out confronts the entire labour law regulation with new challenges.The purpose with this paper is an investigation of the principle of equal treatment in The Swedish temporary agency work act and also to create a deeper understanding of the effects of labour and employment relationship. An investigation of relevant collective agreements will be done to highlight the difficulties the principal of equal treatment is exposed to. Further on is there a will to gain understanding for the wage concept and what possible can be included in the wage concept in relation to the principal of equal treatment in The temporary agency work directive. By using the dogmatic method, an approach to descriptive identifying relevant sources of law and clarify the legal situation in the area.In the conclusions it will be determined that the principle of equal treatment in The Swedish temporary agency work act have different effects depending on if the temporary agency or if the client corporation is tied to an collective agreement alternative if a collective agreement is completely missing.

Development in spin dynamic occurs in the whole world because of therising demands on fast electronic storage for example hard drivesand RAM (Random Access Memory). Measuring the spin resonance of amaterial gives you the insight of the theoretical speed for amagnetic memory. This means the maximum storage speed is below thefirst resonance. All magnetic materials have different propertiesthat will inflict the resonance frequency which brings that theconstructors of memories need to know which magnetic material theywill use to obtain best results. In the market for normal users themaximum storage speed in a RAM memory is 1.6 GHz.

Evaluation of joint swelling is an important part of the orthopedic examination and can be used to follow a patient?s progress during rehabilitation and therapy. Usually a swelling is assessed by palpating the joint but a more objective, but still easy to use, method would be preferable.This study seeks to increase the knowledge in veterinary rehabilitation by validating four different measurement tools (three recognized and one novel) for the assessment of elbow joint swelling: palpation, tape measure (circumference and figure eight measurement), slide caliper (craniocaudal and mediolateral positioning) and tonometer. This was achieved by calculating the inter- and intra-rater reliability and correlating the results from the different measurements with each other.The methods with best inter- and intra-rater reliability as well as good correlation among themselves were shown to be slide caliper with craniocaudal positioning, circumference and figure eight. Additional studies, with a larger and more diverse material, ought to investigate these methods further..

Cardiac troponin I (cTnI) is considered a specific and a sensitive biomarker of cardiac disease, and due to a high inter-species sequence homology; human cTnI assays can often be used in veterinary medicine. The main aim of this study was to perform an initial evaluation of a human cTnI test, the Meritas Troponin I test, for measurement of equine plasma cTnI, in order to investigate whether the test could be a possible subject for a more comprehensive validation. The hypothesis was that the test could measure equine cTnI, as there is a good homology between equine cTnI and human cTnI. The evaluation included a dilution parallelism, an intra-assay precision study and measurement of plasma cTnI healthy horses. In the dilution parallelism and the intra-assay precision study, equine plasma with previously established high cTnI concentration, according to another cTnI assay, was used. In addition, cTnI concentration was measured in plasma, collected from 19 horses, without signs of disease at physical and ECG examinations. The obtained curve in the dilution parallelism was linear, indicating that the Meritas Troponin I test can be used to measure different concentrations of equine cTnI in plasma.

In this bachelor thesis, diagnostic methods for one of Siemens stem inlet control valves have been developed. The work has taken place during ten weeks at Siemens Industrial Turbomachinery AB in Finspång. The company produce steam- and gas turbines and also provides service and maintenance. The purpose with this project has been to develop diagnostic methods that oversee the health of the control valves. By using the developed methods you will know when it?s time for maintenance.

In the current situation a big part ofthe settlements that exist in Sweden isin need of renovation and energyefficiency in order to survive.Therefore, also many of the older houseswith a wooden structure are in a need ofenergy efficiency, which can be done ina variety of ways, including addinginsulation.This project deals with whether the useof a diffusion barrier or a vaporbarrier affects a wall structure byadding insulation to an older house witha timber frame. The insulation materialswhich are concidered in thisinvestigation are mineral wool and woodfiber insulation. Efforts are focused onthe effects of moisture on theseinsulation materials.To demonstrate the differences thatarise the moisture measurement programWUFI have been used to simulate avariety of wall designs. These designsare developed in consultation with theconstruction carers who are active inthe industry.Using WUFI graphs illustrating themoisture levels of the wall structureswere obtained and from these conclusionsvould be drawn. The work demonstratesthe differences that arise when using adiffusion barrier or vapor barrier inwall construction.

This work aims to obtain information on diurnal variations of aerosol concentrations in thecity of Lund (Sweden) and trying to locate the origin of the aerosols long distance transports.The study shows that the aerosol concentrations varied quit strongly over the entiremeasurement period, reflecting air masses of different degrees of pollution, mainly as a resultof the diurnal rhythm of the traffics. Trajectories reveals that air masses originated inSoutheastern and Eastern Europe contains higher aerosol concentrations compared to other airmasses..

The purpose with this bachelor thesis is to identify risks and insufficiencies concerning the production at WilloMaskin AB. The project is limited to only 4 machines, where theories as ?OEE? (overall equipment efficacy) should be illuminated and analyzed. The theory of ?Single Minute Exchange of Die? is also presented.The method used in this project is mostly based on qualitative studies but also quantitative studies are presented.

This report describes a study, description and testing of parts to an application adapted to the operating system Android. The application is supposed to measure the distance to a car ahead. Apart from distance measurements the ability of the application to calculate its own speed with the help of GPS is tested. From these two parameters, speed, distance and some constants the theoretical stopping distance of the car will be calculated in order to warn the driver if the car is too close to the car ahead in relation to its own speed and stopping distance.Tests were conducted on the different applications that were programmed and the result showed that the camera technique in the mobile phone itself limits the maximum distance of the distance measurement application. The max distance the tests in this thesis revealed was approximately 5 meters.

This work is an experimental study where knock sensor placements are investigated using engine tests. The aim is to studythe quality of the signal from knock sensors and how the signal for engine control is affected at different sensor locations on Scanias, engine DC13. To find out at witch position on the engine youcan get a usable signal for engine control, the engine is running while the knock sensors with advanced measurement equipment is connected to the engine. Evaluation of signals from the knock sensors are made in the computer program Matlab. The program is producing a seriesof plots, from these plots it is visually possible to draw conclusions and find connections.

Bachelor thesis in Business administration, School of Business and Economics at Linnaeus University, Controller, 2FE05E, spring semester 2013 Title: Non-profit sport associations management control- A multi case study of management tools Authors: Christoffer Ahlgren, Emelie Andersson and Emelie Nilsson Tutor: Anders Jerreling Examiner: Elin Funck Background: Non-profit sport associations activate a large number of people in Sweden and have a great impact on the social community. Because of the increasing complexity to operate sport associations some are experiencing serious financial problems. The daily financial work has a major impact on how the future unfolds for the sport associations. An adverse economy not only creates complications in the economic field, it also affects the sport itself. Purpose: Our purpose with this paper is to describe and explain how the economy is controlled in non-profit sport associations and the tool that is used to support this process.

Within all industries, there is a change in working time required; this also includes the construction sector. However, the way construction sectors are differentiated is by not having been given the opportunity to be practiced or tested.  The aim of this thesis that we have done in collaboration with the Concrete Industry was to investigate the possibility of developing an automated method for quality assurance of SKB at the site. The idea is to make the O-funnel to be more utilized and therefore ensuring that the appropriate concrete quality is provided which eventually would lead to a better development in the production process.The project has involved theoretical work and laboratory experiments. The theoretical work gave us a good foundation at the beginning of the project. After gathering the information and material, the laboratory experiments began by SCC in their laboratory in Hammarby. The collected data from the various laboratory tests formed the foundation for trying to relate measurements for consistency of SCC with each other and therefore find out how measurements from O-funnel varies with different concrete mixtures.