Sök:

Sökresultat:

11035 Uppsatser om Work capacity - Sida 9 av 736

TCP/IP i taktiska ad hoc-nät

TCP (Transmission Control Protocol) is a transport protocol designed for the wired Internet. In wireless networks packet losses occur more frequently due to the unreliability of the physical link. The main problem is that TCP treats all losses as congestion, which leads to a lower throughput. Ad hoc networks are multihop wireless networks of mobile nodes, where each node can allow other packets to pass through it. Topology changes often occur and may lead to packet losses and delays, which TCP misinterprets as congestion.

Bärförmågetillväxt i pålad friktionsjord

Piled friction soil show a set-up which is increasing with the time after installation. The cost could be reduced if the set-up had been taken into account when designing but in Sweden it is very unusual to do that. Previous studies showed that set-up can vary between 25 % and 75 % during the first 90 days after pile installation. This showed that the effect of the phenomenon is difficult to predict. A study involving five projects have been carried out by specifying certain parameters like pile type, method for pile installation and test method for measure the bearing capacity in friction soils located in Sweden.

Planering & produktionsstyrning : Lean filosofin vid produktion av asfalt

Lean is a production philosophy which is about increased resource use while meeting customer requirements. The foundation of lean comes from Toyota and their production philosophy The Toyota Way. Professor Jeffrey k. Liker has worked with Toyota's production philosophy and Lean for a long time and has created a 4 P model and 14 principles that characterize the Toyota production system (TPS), which many sources refer to.The aim of my work is to study the working procedure of asphalt projects from sales to the laid asphalt with a focus on planning and production management. The goal is to examine how the lean philosophy can be applied in planning and production to simplify the flow of asphalt projects based on Likers model and principles.

Höjning av vattennivån i Mälaren : Ett hot mot Stockholms centrala delar vid en framtida klimatförändring?

In today?s World is climate change an important and hot topic. Climate scenarios for Sweden show a warmer climate, especially during the autumn, winter and spring. The same climate scenarios also show that the precipitation will increase during this part of the year, however, during the summer the opposite is expected to occur. The purpose of this essay is to examine how future climate change will affect Stockholm especially the expected increase in precipitation, which may lead to a rising level of the Lake Mälaren. During 2000/2001 was Stockholm hit by a flood. This flood nearly resulted in major consequences and showed that there were significant risks for the city of Stockholm and increasing precipitation will result in even more water in the drainage systems of Lake Mälaren. The results presented here show that it is important to increase the drainage capacity of Lake Mälaren in order to reduce the risks of flooding in the central parts of Stockholm.

Framtidens medborgare : En ideologikritisk analys av den nya skolan i ljuset av demokrati och samhällsmedvetande

The purpose of this study is to investigate whether the schools? pupils have the capacity to understand societal change through social consciousness. In order to investigate that a theory has been developed specifying what social consciousness means and how it is used. The theory has been used as a tool in an ideology critical analysis of the steering documents on which the schools? work is based.

Beror KRAV-grisars ledanmärkningar på miljöfaktorer?

This project investigated how elevation and vegetation type influences variation in plant litter phenolic content and protein precipitation capacity among and within common plant species for two different vegetation types, heath and meadow, in a subarctic ecosystem in the Abisko region of northern Sweden. As nutrient availability generally decreases with increasing elevation as a result of decreasing temperature, I hypothesised that phenolic content would increase with elevation and be higher on the heath than the meadow. To test this, the total phenolic content and protein precipitation capacity was estimated in leaf litter from 13 species in both heath and meadow vegetation across an elevational gradient ranging from 500 to 1000 meters above sea level (m.a.s.l.) in the study region. The results showed that elevation and vegetation type both had a strong impact on both variables. Total phenolic concentrations decreased with elevation for the meadow, and were greater for the heath than the meadow.

Majstorkning :

The corn plant came to Europe with Christopher Columbus in the 14th century and have ever since bin cropped here, but corn haven?t bin very common in Scandinavia until recently. The mainly use for this crop silage but even corn for grain is cropped in Europe. Corn for grain is a common part of feed in beef and chicken farming. In Sweden corn for grain is pretty rare but almost 1000 hectares are used for this crop, Lantmännen Sverige is the biggest buyer of corn at the moment.

Användarcentrerad utveckling av mobilt IT-stöd

This exam paper has been a collaboration between the writers and SYSteam Utvecklingspartner in Huskvarna. The assignment was about finding a need for a mobile application, making a requirement specification document with design documents and parallel to this constructing a prototype. The assignment is summarized in the following questions:? How can companies in the forest industry benefit from mobile information technology?? How can a user centered perspective be used in the process of making the requirement specification document and the design documents?? How do guidelines for usability apply to a mobile application?Three visits to companies in the forest industry were made to find a need for mobile information technology solutions. After a small analysis of the different companies? problems and conditions the decision was to use Tenhults Impregneringsverk AB in the case study.We used the FA/SIM method in our job of finding the organization needs for change and the principles of User Centered Design in the work of constructing a prototype.The result of our work is a requirement specification with design documents and a prototype.

Invallningsmodeller för petroleumcisterner

This paper is about the extent to which simplified penetration calculations ofsmall-caliber projectiles is a useful tool for assessing the physical protectioncapability. The work should be seen as an attempt to create an accessible tool inthe form of a simplified equation that allows for a better and safer use of thenaval vessels. The tool will also be used at different levels so that decisions andinstructions could be clearer.Performed calculations show a very limited capacity of a ship's basic design interms of physical protection against the use of small-caliber projectiles.How do we know that the calculations correct? By verifying the calculations withpractical shooting tests, a substantial condition to answer the question will becreated. To shoot against a material with two different thicknesses estimated toproduce perforation and non-perforation is a good approximation of the equationusability in the context..

Energibesparing i flerbostadshus

This paper is about the extent to which simplified penetration calculations ofsmall-caliber projectiles is a useful tool for assessing the physical protectioncapability. The work should be seen as an attempt to create an accessible tool inthe form of a simplified equation that allows for a better and safer use of thenaval vessels. The tool will also be used at different levels so that decisions andinstructions could be clearer.Performed calculations show a very limited capacity of a ship's basic design interms of physical protection against the use of small-caliber projectiles.How do we know that the calculations correct? By verifying the calculations withpractical shooting tests, a substantial condition to answer the question will becreated. To shoot against a material with two different thicknesses estimated toproduce perforation and non-perforation is a good approximation of the equationusability in the context..

Arbetsmiljöarbetet på SverigesBostadsrättsCentrum : Vad ändringarna i arbetsmiljölagen innebär

This diploma work was performed because the company Sveriges BostadsrättsCentrum, with the abbreviation SBC, had a need to gain insight into how changes in the Work Environment Act and related regulations which took effect January 1, 2009 affecting their work with the work environment. The changes mean that the client may hand over his work environment responsibilities to a contractor and that he has to select so-called building work environment co-ordinators. At SBC they are working as representatives for tenant-owner's association when a construction is about to be carried out. The purpose was to ascertain how changes may affect the work at SBC. The diploma work intends to educate the staff at SBC how work with the work environment would look like if they met the regulatory requirements.

Däck-mark Interaktion hos skogsmaskiner

The most predominant method for forest harvesting in Sweden is the cut-to-length method based on two-machines, a harvester that fells trees and cut them in a predefined length, and a forwarder which transports logs to a landing area for further transport to a processing facility. New machine solutions have to be much gentler to the ground than today?s machines. To be able to develop a forestry machine that preserves the terrain requires a proper understanding of the interaction between tire and soil.The goal of the project is to contribute to the existing knowledge of forest machine tire-soil interaction and to develop a tire-soil model that enables dynamic simulations of forest machines operating in rough terrain. The modeling has especially been focused on the interaction between tires and soft ground.A comparison of theoretical data of different WES-based terrain interaction models and a comparison test data from a full scale field test is presented.

Konstruktion av yttervägg med vakuumisoleringspanel

This paper is about the extent to which simplified penetration calculations ofsmall-caliber projectiles is a useful tool for assessing the physical protectioncapability. The work should be seen as an attempt to create an accessible tool inthe form of a simplified equation that allows for a better and safer use of thenaval vessels. The tool will also be used at different levels so that decisions andinstructions could be clearer.Performed calculations show a very limited capacity of a ship's basic design interms of physical protection against the use of small-caliber projectiles.How do we know that the calculations correct? By verifying the calculations withpractical shooting tests, a substantial condition to answer the question will becreated. To shoot against a material with two different thicknesses estimated toproduce perforation and non-perforation is a good approximation of the equationusability in the context..

Arbetsmiljöarbete och ansvarsförhållanden enligt arbetsmiljölagen

This study deals with work environment from a legal perspective. The study includes legislative history, legislation today and one empirical study. The legislation that concerns work environment (health and safety) in Sweden today is found in the Swedish Work Environment Act (WEA), the Work Environment Ordinance (WEO), Provisions issued by the Work Environment Authority, related legislations and also collective agreements. The WEA, passed by the parliament in 1977, came into force on the 1st of July 1978 and it defines the framework for Provisions issued by the Work Environment Authority, which is an authority superintended by the Swedish government. These Provisions contain more detailed stipulations and obligations with reference to the working environment.

Telias 4G i Umeå

This report presents the results of the tests of data rate and signal strength that I have conducted. The tests have been performed in the municipality of Arvidsjaur, Sweden. The report also contains the conclusions I have drawn from the results as well as an introduction to radio and the technology used in the nets that have been testedThe equipment used is:LG G2 cellphone used to test Telias 3GHuawei b593s-22 3G/4G router used to test Tele2s 3G/4GMobile Broadband Gateway R-90 used to test Net1s CDMAThe data rate has been tested with bredbandskollen (www.bredbandskollen.se). The signal strength(RSSI) has been read in the configuration menu of the broadband routers as well as in the cellphone.The conclussions drawn:Net1s net appears to be more used compared to its capacity than the other netsTele2s net has a high and even data rate where it?s signal strength is sufficient.

<- Föregående sida 9 Nästa sida ->