The ambition with this study is to look into and create an understanding for how an intranet can work as a support system in work processes in capacity as a source of knowledge. We want to enhance the understanding for which kind of knowledge that can be coded in and transmitted by an intranet, and which that is lost in this process. We also want to clarify what it takes to get this knowledge, in collaboration with the intranet, to support the work in an organization. It is a qualitative case study at a Swedish bank. It consisted of semi standardized, half structured interviews with five people in one of the bank?s local offices.

In modern military operations the requirements of transmitting large amounts of information have increased substantially during the last decade. This increases the demand for high-capacity radio networks. It is also very important that military decisions are made on recent and correct information and this implies that low and known delays are required. The existing military radio ommunications, within the Swedish army, do not meet the requirements for capacity and delay. We have investigated how the capacity and average delay can be improved in an Ad Hoc network with STDMA by using antenna arrays.

This thesis takes as its starting-point the different stands on the ever ongoing growth of multinational corporations (MNCs) and its consequences. Two opposing branches of theories, arguing that the establishment of MNCs in developing countries is good respectively bad for these countries, are tested for the aspect of state capacity. A quantitative method is then used to test if there exists such a relationship at all and if so, which of the two notions that are right.The presence of MNCs is measured as FDI of GDP while state capacity is defined as a combined index for three of ICRG's Political risk indicators. The two variables are analysed, mainly by cross tabulation, using an extensive dataset of 130 developing countries measured for a period of 20 years.The outcome is though ambiguous: No solid correlation can be found, but countries with a higher rate of FDI of GDP tend to have a slight worse rate of state capacity throughout the analysis. Thus the result points in favour of the notion that MNCs are bad for developing countries? state capacity.

The ambition with this study is to look into and create an understanding for how an intranet can work as a support system in work processes in capacity as a source of knowledge. We want to enhance the understanding for which kind of knowledge that can be coded in and transmitted by an intranet, and which that is lost in this process. We also want to clarify what it takes to get this knowledge, in collaboration with the intranet, to support the work in an organization. It is a qualitative case study at a Swedish bank. It consisted of semi standardized, half structured interviews with five people in one of the bank?s local offices.

Before the European construction standards were introduced in January 2011, it was mainly themethod in BBK04 that was used for calculating punching capacity in concrete structures, and in lesscommon cases the method in BHB. The method of BBK04 is easy to use and have had the samestructure since the first was published in 1979. The Concrete handbook method (BHB) where usuallyonly used when a higher punching capacity was needed and the cross-sectional height where fixed,calculations using this method entails more work, but will in return usually give a higher capacity. Italso allows the use of shear reinforcement to increase the cross-section capacity. The method ofcalculating punching shear in EC2 differs largely from the methods of BBK04 and BHB.

This master thesis was carried out at ELFA, one of the largest catalogue distributors of electronics in northern Europe. ELFA offers a wide selection of products such as measuring instruments, fuses and screwdrivers. The master thesis handles the possibilities of an increase in the internal flow of products. The background to this problem is ELFA?s acquisition of two new companies, which brought the product range in the warehouse from 55 000 to 80 000 products.

Crossfit is a recently developed form of training which is based on a number of functional resistance exercises performed at high intensity, often to the point of muscular failure. Crossfit has since its introduction 30 years ago, reached vast popularity all around the world, including Sweden. Its practitioners considers Crossfit to be an effective training method for achieving a functional and total trained physique thru improvements in VO2max, muscle strength, endurance, balance and speed. Few scientific studies has been published in the subject which is why this study sets out to examine the effect of Crossfit on VO2max (measured with Åstrands submaximal cyclingtest), maximal strength capacity in lower- and upper body muscles (measured with 1 RM tests in bench press and leg press), rapid strength capacity and strength endurance capacity in upper body muscles (measured with push-up test in 30 seconds) and explosive strength capacity in lower body muscles (measured with sergeant jump test). Five women with an average of 33(±5) years of age all new to Crossfit, performed these tests at two separate occasions with a training period of four weeks consisting of 12(±3,67) Crossfit sessions in between.The result showed a significant improvement in the maximal strength capacity of the leg extension muscles (p=0,025).

In today's agriculture efficiency and the capacity of tools and machinery are crucial. In this work we investigate whether it is possible to enhance the capacity of sowing by increasing the work speed of seeders, how seed technology affects seed placement, and if there is any difference between two different brands of seeders and their sow techniques. The seeders we have chosen to compare are Väderstad Rapid drill and Amazon Cirrus drill. The tillage capacity of the seeders and their traction power needs were examined as well.Väderstad Rapid and Amazon Cirrus were tested in a randomized block design with four replicates at three different speeds, 8 km/h, 12 km/h and 15 km/h. The seed placement at the different speeds was examined by dividing the seedbed into four different zones from its surface to its bottom.

Tax revenue is crucial in order for states to survive. States vary a lot in terms of tax revenue however, and different explanations are frequently debated among political scientists. Recently, scholars have argued that the variations in tax revenue among European states today can largely be explained by their ability to collect information about the citizens and their belongings during the early modern period (1450-1800). States that were early in acquiring this information in so called cadasters, could use it in order to collect tax. This fiscal capacity thereafter sustained in a path dependent manner.

Self-driving cars are soon to become a reality to the commercial market. A self-driving car does not have a human operator, which enables some interesting characteristics. The main benefits are considered to be:The number of accidents and traffic jams should be reduced.Enhanced comfort.Energy usage could be decreased while capacity could be increased.This study concerns the causes for improved energy efficiency. The reason for improved energy efficiency is mainly because of the variation in terms of acceleration, braking and distance holding are reduced. The vehicles are more intelligent and can work together as a unity.

The purpose of this research was to find how supervisors in the care of elderly experience their leadership in everyday work and their view on the factors which are important for their leadership. In the research a qualitative method has been used to do interviews with six supervisors and to do analysis of material. By the help of literature studies, I explained leadership. Result of the study indicate that leadership concerned supervisor should prepared to do the right thing in every situation and to find best solution of different situation that come up on the work. The way to do all this is important to create leadership.

Self-driving cars are soon to become a reality to the commercial market. A self-driving car does not have a human operator, which enables some interesting characteristics. The main benefits are considered to be:The number of accidents and traffic jams should be reduced.Enhanced comfort.Energy usage could be decreased while capacity could be increased.This study concerns the causes for improved energy efficiency. The reason for improved energy efficiency is mainly because of the variation in terms of acceleration, braking and distance holding are reduced. The vehicles are more intelligent and can work together as a unity.

Microproduction, also called distributed generation, is something that has become more and more popular in the electric grid. Microproduction can however lead to unacceptable performance if several units are installed in the same low voltage network. It is therefore good to know a limit where the performance of the low voltage network becomes unacceptable based on given parameters. This limit is usually called hosting capacity.In this report the hosting capacity with respect to voltage and current have been studied in three low voltage networks which are located in Falu Elnäts concession area. This has been done by simulations in a GIS-program where critical times of the grid have been simulated.

 To enjoy work, and be satisfied in the work you do, is important to most people. Work scientific research shows that dissatisfaction with physical or the psychosocial work environment often gives negative effects on the performed work. The purpose of our study is to chart the experience in work satisfaction and psychosocial work environment amongst nurses within psychiatric care. It is an empiric cross section study. The participants in the study contains nurses who are either employed on a conditional tenure or have a temporary post (>3 months) in policlinics and wards in general adult psychiatric care (n=126).

This thesis describes the redesign ofequipment designed for drying bags thatis used in Fresenius Kabis´manufacturing of their nutritionmedicine in Uppsala. The need of thistask arise during the start of thedevelopment of a new packaging line werethis equipment were meant to be used. Anevaluation of the bagdryers capacity andcapability was necessary.The work started with gathering ofinformation from suppliers of the usedcomponents and from the responsibleengineers for this equipment. Aneducation to learn how the equipmentworked and how to operate it were taken.That was followed by the creation of astudy plan were the tests were plannedto test different parameters effect onthe drying result and to see if thebagdryer managed to handle the bags ofthe correct format in the pace that theequipment should be designed for.The test results detected a need ofdesigning a unit with a function thatholds the bags in place while passingthrough the dryer in order to attainhigh quality results. The results werelater used for optimization of thedesign.