Today small metal parts are mass-produced as for example rollers in cylinder bearings. At high velocity cutting the metal is cut with a great force in a scissor-like device. Both precision and repeatability is important to be able to guarantee good quality, but from an economical point of view it is also important to keep a great manufacturing capacity. The part of the process that is most time consuming is when the metal bar, that is about to be cut, is fed to the right position. Therefore it is interesting to examine if the time used for positioning can be reduced.

The objective of this thesis is to map the resources and methods used at the department OPPC, at AstraZeneca, and derived from that give suggestions on possible solutions that will increase their productivity.Mapping of the product flow, as well as gathering of process data, has mainly been done using observations, but consultation with the process technicians has also played a great role. Further have theoretical methods been used, based on literature studies, within the areas of Lean production and statistics.The work has incrementally gone forward since the steps taken has been restricted by the irregularity of production which led to the need of creating a fictive production flow. This has affected the lead-time calculations in the way that they are meant to give an indication, rather than an absolute truth, on how different methods described shall be used.The current state analysis showed multiple areas of improvement when defining capacity as value adding time in relation to total throughput time. Using the "standard scenario" as a basis showed that the actual production flow only constituted 50% of the total project time. Further it showed that the workflow contained more non-value adding activities than value adding activities, which is a result of how the work is distributed within the department as well as in the different projects.

In this thesis an explorative study was undertaken with the aim to study how a number of private care providers, as well as politicians and officials from councils in and around the Stockholm and Uppsala counties, think about the future of the Swedish elderly care from a property perspective, i.e. homes for the elderly. The analysis shows that there is a demand for capacity in 6 out of 16 municipalities, and that the property is an important part of this capacity, and the fulfillment of it. This was mainly due to the cost of capital, but also because of several other factors such as lack of land, a wish to guide the design, ideology, and in many cases a wish to use the property as an instrument of domination to control private health care providers.Also, the property was show to be connected to economic competition, to freedom of choice, and to quality. The problems related to the property in the market for elderly care still remains to be solved.

ÅF Test Center in Borlänge had a need to expand their capacity for compressive and tensile strength tests. They wanted to do this by using a hydraulic cylinder, which they already possessed, to apply the force with. This required a load receiving structure. The aim of this work was to design and dimensioning a test bench for a cylinder marked NIKE 300 tons. The work would result in a completed design proposal on a test bench which could manage to run the compressive and tensile strength tests of up to 3000 kN.

The aim of this study is to examine the perception of work of young men and women. A central problem that the study focus on is how young men and women value work, what do they expect to get out of work, and what are their experiences of work. The study also examines what work value and work mean for them. Eight young men and women between the ages of 22-25, currently working in different field, were interviewed. The individuals interviewed had different educational backgrounds.

ABSTRACTPurpose: The purpose of the study was threefold. Firstly, to investigate if a four week program in pain rehabilitation had any effect on how much individuals with persistent pain worked and their degree of kinesiophobia. Secondly, to study if there was a correlation between how much these individuals worked and their degree of kinesiophobia. Thirdly, to study if there was a correlation between the change in these variables.Method: 112 patients who had participated in a four week rehabilitation program took part in the study. The study had a retrospective design, which was based on a review on medical records and consisted of three minor parts.

In my work I have chosen to examine the profitability for small scale production of hemp briquettes. My study also includes a review of which briquette technique that is the most common one among small scale producers. The reason that I have chosen this subject is because of the discussions about climate and energy that we face almost every day. I also think the subject is extra interesting in these days when the grain prizes are at a historic high level. In order for me to achieve a reliable report, a hemp and briquette producer has given me the actual data from his farm. In that way I have been able to make my calculations from a concrete perspective.

The aim of this thesis is to develop a new business model for district heating and cooling firms which can contribute to a stabilization of the Swedish national energy system. The business model is developed for a district heating and cooling firm and is exemplified with Fortum Heat. The theoretical investigation around the topic creates a rigid base for following qualitative empirical studies. Osterwalder?s canvas for business model generation is used together with a Casual Loop Diagram to identify a number of business opportunities which stabilizes the national energy system.

This study investigates how productivity works when employees have remote work in their workplace. This study will also focus on challenges that cause productivity to decrease when remote work applies. The empirical data shows that individual productivity increases when employees work in a workplace that provides remote work. The data says that less distractions and high autonomy is a big factor to why employees feel that they work productively at home. Briefly it shows that a flexible workplace makes individual employees work productively and even motivates employees to work effectively because of increased concentration and undisturbed work environment.

Abstract:Because personal assistance is relatively new in social care in Sweden we were interested in to get more knowledge in how supervisors for personal assistants worked. In our study we choosed to look into how the supervisors worked with the physical work environment for the personal assistants. The questions we wanted to found answers for in this study was, which work directions the supervisors for personal assistants have around the physical work environment, which legal provisions there were around the physical work environment for the personal assistants and how the supervisors experienced the work with the physical work environment for the personal assistants. We did a qualitative interview study with supervisors for personal assistants. We realised in our study that there were big differences in how the supervisors for personal assistants worked with the physical work environment for the personal assistants.

The violence against women is an important matter. In Sweden there are several organisations that takes care of the women and children in need.One of the many organizations you can turn to is women's shelter organizations. They are nonprofit organizations. They depend on the contribution of peoples free time and on the government's awareness of the work that the organization do. The social services has the main responsibility to take care of women and children in need.

The three post-communist states - Belarus, Moldova, and Ukraine ? have gone different ways in terms of freedom and democracy since the breakdown of the Soviet Union 1991. During these years, the state and the civil society have been fundamental actors in the struggle against, and even for, authoritarianism.A strong state with great capacity in Belarus has undermined the chances for the civil society to fulfil its task as a watchdog of the state and link between the citizens and the government.Failed authoritarianism in Moldova has led to a situation where both the state and the civil society are weak. The major problem is lack of organization and cohesion; both the state and the civil society have often been divided by ethnical differences and are therefore not strong enough to promote democracy.In Ukraine, the dominance of a strong state ended in 2004 when the Orange Revolution took place, sometimes called a ?peak of democracy? where popular mobilization and protests succeeded in it's opposition against the state.

Social work is a social phenomenon, existing in most societies, that has given rise to a multitude of special organizations and professions. For that reason social work is dealing with a complex identity. The purpose of this study is to illustrate how social workers and the scientific discourse interpret the concept of social work. In addition to that the study intends to show similarities and differencies. The research process containes two studies, one based on qualitative interviews with five social workers and the other consisting a surway of academic litterature.

AbstractTitle: Manipulation or relation ? the language as an instrument for influence (relation eller manipulation ? om språket som medel för påverkan)Number of pages: 42Author: Matilde JohanssonTutor: Peder Hård af SegerstadCourse: Media and Communication Studies CPeriod: Autumn term 2007University: Division of Media and communication, Department of information science, Uppsala universityPurpose/Aim: The aim of this essay is to gain a deeper understanding of how communication consultants work with communication. The purpose is to sort out whether or not the consultants have the same view in their strategic work with influence as they have when they build relations to customers. In the end the essay will answer if the perspective is the same between their strategic work, their relations and the research definition of how to obtain a genuine dialogue and a good relationship.Material/Method: This is a qualitative research. I have interviewed five communication consultants from three different corporations.

The study examines the meaning of having a dog in the workplace of personnel who work with therapy. The purpose was to examine the personnel?s view of dogs in their work envi-ronment. The study uses two theories. One is ?psychosocial work environment? and the other theory used is ?symbolic interactionism?.