In the collections of the Vasa Museum, 100 leather objects have exhibited salt precipitations. The objects, that have previously been impregnated with PEG, have become deteriorated and fragmented due to the precipitations. During a previously conducted study it was established that the precipitations consisted of iron and sulphur. However, it was not established whether they occurred in the leather?s inner structure and no treatment plan was developed.

Syftet med detta arbete är att ta fram den ultimata träkärnan utefter uppspaltade önskemål på egenskaper i ett par allmountainskidor med nordiska träslag.Studien är deskriptiv och kvantitativ då den syftar till att mäta förändringsgraden under påverkan på träslagen. För att få in data till mina frågeställningar har tester genomförts som genererar datainsamling. En förundersökning gjordes med intervjuer för att få fram ett mer specificerat underlag för att konstruera vilken metod jag skulle ha i det slutgiltiga arbetet.Resultatet av studien visade att träslaget bok hade de bästa egenskaperna vad gäller böjhållfasthet. Ask hade de bästa egenskaperna när det kom till testerna på vridstyvhet. Det negativa med dessa träslag är att de är för tunga.

Could patterns change the way we as consumers feel about a product as it ages and wears down? Why do some products increase their value as they are being worn downand others do not? Could the same affection that increases with your favourite jeans or an old, worn down, scratched and beautiful wooden furniture, be applied on otherproducts with different ability?s and history?The goal was to explore patterns and beautiful aging in products to increase the consumers desire to keep the well used product a little bit longer. Not to prolong the products ?lifetime? from brand new till it?s no longer inhabit their main function, but at that precise momentwhen you as a consumer decides to through it away in favour for a new, updated version. To buy ?new and fresh?.Patterns with different expressions, colouring and size, were explored that increase the value of a product which in this project contained handles and varies of surfaces on casseroles, frying pans, whisks, cutlery etc.

Sewer trenches usually contain material with a higher hydraulic conductivity then the adjacent soil. Thus they can serve as paths of preferential flow in a polluted area. Wastewater from factories can also leak from wastewater pipes and pollute the soil in the sewer trenches.The purpose of this project was to investigate pollutions in sewer trenches and in sewer pipes in the industrial area of Köpmanholmen, 20 km south of Örnsköldsvik in the north of Sweden. To make an estimation concerning the potential of transport of pollutions in sewer trenches, hydrological calculations were performed.Leakage to any greater extent did not seem to be a problem in the area. This is the case both for the concrete and the wooden pipes that have served as factory wastewater pipes.

During 40 years of industrial production, from the end of the 1890?s until the end of 1930?s, coal and wood distillation products were manufactured in AB Carbo?s tar factory along the River Gimån in Grötingen, in the county of Jämtland, Sweden. In accordance with the Swedish Environmental Protection Agency?s Methods for Inventories of contaminated sites, MIFO, the site in Grötingen has been identified as a potentially contaminated site. In order to determine whether toxic substances pose a threat to human health and ecological systems in the area, there was a need to investigate the presence of contaminants, their levels and potential for migration.

This paper deals whit the problems concerning social organisation in the county of Dalarna in middle Sweden during the Middle Ages 1050- 1528. This paper also deals whit the every day ife in Dalarna during the same period. In the paper archaeology, ethnology, history and osteology is used in order to create a so accurate as possibly picture of every day life at the farm, the villa and the keep. Each environment is compared to each other in order to try to see the social structure of the county. The geographic frame for the paper is the part of Sweden above the border zone of Limes Norrlandicus, or lower Norrland.The results presented in the paper shows that Dalarna most probably had a flat social organisation in the meaning that the every day life and its artefacts was much the same in all the environments.

Today there is a widespread opinion that the woodmarket and the forest industry are dominated by a traditional way of thinking and not adapted to the customers of today; a lot of products are produced purely on routine. Also, there is a demand for improving the quality of sawn woodproducts. AB Karl Hedin wants to sort this out by increasingly adapt their products to the demands of the market, i.e. through introducing a short wallstud of standard length, "Hedinregeln". At tirst, the wallstud will be produced in lengths of 2,70 m and of guaranteed quality.

In the west part of Trelleborg, on previous farmland a new society is under construction. It is situated right next to the ocean and close to the European freeway. Eight types of villages, all with different kind of architecture will be built in the area, one of them is Torns Village built by Skanska and Ikea. A concept called BoKlok. This specific village consists of twelve houses and five apartment buildings. They are all somewhat classical in their appearance with wooden panel, but at the same time they have a modern touch.

Tylö AB is the leading manufactor of sauna cabins in Europe, but there is a lack of a sauna lightning produced by Tylö. The project of developing a new sauna lightning series was assigned two students at the developmentengineering program at Halmstad University. The main problem with lightning in the sauna is the heat and security aspect. The selection fell on LED technology as the lightning source, thanks to its small measures and low heat emission. The work of constructing of a lightning armature which the capability of cooling down the LED lightning was carried out during autumn ?06 and spring ?07.

Tylö AB is the leading manufactor of sauna cabins in Europe, but there is a lackof a sauna lightning produced by Tylö. The project of developing a new saunalightning series was assigned two students at the developmentengineeringprogram at Halmstad University. The main problem with lightning in the saunais the heat and security aspect. The selection fell on LED technology as thelightning source, thanks to its small measures and low heat emission.The work of constructing of a lightning armature which the capability of coolingdown the LED lightning was carried out during autumn ?06 and spring ?07.

Denna avhandling behandlar stegljudet i två trähus på campus i Växjö. Staden lyfts ofta fram som en bra förebild inom miljö- och klimatfrågor. Det kommunala fastighetsbolag som äger, förvaltar och bygger universitetets byggnader är intresserade av dessa frågor när nya hus ska byggas. De två senast byggda husen är byggda med trästomme, som anses vara ett bra miljöval. Framtida hus förväntas även de byggas med trästomme.

This thesis is based on an exhibition at the county museum Upplandsmuseet in Uppsala, Sweden. During an internship at this museum I got a chance to produce an exhibition, with some guidance from the museum staff. This exhibition was created with the purpose of teaching about agriculture in the late 19th century and also about the magnificent workmanship of Alrik Klingberg, who have carved these wooden objects for over 50 years. Each one of the objects possesses a story and a memory. The memories that Alrik Klingberg has incorporated into the objects are mainly from his childhood at a croft in northern Uppland.

This thesis deals with different methods for measuring moisture-related dimensional changes ofwood. Typically relative humidity is measured to determine if the ambient climate around anobject is harmful to it or not. Values between 40 to 65% RH are recommended for hygroscopicmaterials. To know how a wooden object actually reacts to changes in the surroundingenvironment requires methods that involve the object itself. Because of the wood anisotropy,differences in wood structure, finishes and other restraints, it is not always possible to predict themovements.This paper addresses various measurement methods, primarily methods that have been testedin the field of conservation, with examples of their use.

Actinomycosis is a rare, deep-seated infection of the jaw of cattle that include the progressive enlargement of bone structures. It is caused by Actinomyces bovis, a gram-positive rod found as a normal commensal of the alimentary canal in otherwise healthy animals. This paper shortly describes Actinomyces bovis and its ability to cause "lumpy jaw" or actinomycosis in cattle. It will describe its pathogenesis, diagnosis, treatment and some clinical presentations. The incidence of symptomatic actinomycosis infection is quite low in Sweden today.

The acoustics in a control room is a complicated phenomenon. Early reflections, reverberation time and area in the room are some of the problems. This report is about the reflection on the mixing console in a control room. The control room being built, these reflections are difficult to take into consideration since the mixing console is one of the very last items you place in the room. This report will explain three main measurements that were done in order to get the answer to the following question: Does the mixing console interfere the frequency curve at listening position? Three measurements were done and the difference between the measurements was that the microphone and the loudspeakers were placed in different places in the control room.