Passive houses are a relatively new concept in Sweden and by that it is meant a house without a traditional heating system. The most acknowledged passive house project is the terrace houses in Lindås, Gothenburg, which we have used as a reference. This project concerns a square apartment block. So far, no square apartment block has been built as a passive house in Sweden.The common opinion in the construction industry is that it is not economical to build extremely energy efficient houses. With Peab as commissioner our task was to investigate if that is true, if regarding the construction of a multi storey house as a passive houseMidroc, now owned by Peab, constructed in the block of Preussen in Jönköping during 2004-2005 four houses, with 132 apartments distributed on seven floors.

In recent years, moisture damages have been noticed in rendered, undrained stud walls. The design is built on the principle one-stage tightening which means that there is no air gap in the construction. The damages have occurred when water has permeated through the rendering in leaking connections and fittings for windows, doors, canopies, balconies, terraces and awnings. Behind the plaster carrier, which consists of either polystyrene or rigid mineral wool, plasterboard has often been used as a wind protection barrier. In many cases the wind protection barrier and the underlying wooden studs have been exposed to mould and in some cases even rot.

This essay is an analysis of the objects made of bronze found in an excavation Västergarn parish, Gotland, in 2010, conducted by the University of Gotland. The studied material presented in this essay comes from contexts inside, as well as nearby the foundation of a medieval building which purpose is still not certain. The first purpose of this study is to present the bronze-objects found inside and nearby the foundation of house 6, and to see if there are any datable objects. There is also a discussion whether there has been any bronze-crafting in the area. The second purpose is to make a contextual analysis to see if there are any differences between the material found outside and inside of the building, and what conclusions can be made regarding the function and use of the building.

Summary:The Clinical Training Center at the Swedish University of Agricultural Sciences in Uppsala uses new methods for educating and training veterinary students. Among these methods are computer programs. The aim of this study was to create an interactive application based on data from horses CT-scanned at the Center for Medical Image and Visualization at Linköping University Hospital. The purpose of this application is for veterinary students to be able to use multidimensional visualization to study equine anatomy. The resulting application named "EQUINE VIRTUAL ANATOMY - Flash in the Tunnel" consists of data from six heads, one left foreleg and a wooden dalahorse.

Jag har som examensarbete på master-nivå formgivit en sittmöbel med utgångspunkt från min uppväxt i Dalarna. Målet har varit att göra en filosofisk tolkning av mina minnen samt en hyllning till regionen, i synnerhet Borlänge där jag växt upp.Jag har under projektets gång gjort en resa både på ett mentalt och rent fysiskt plan tillbaka till den plats jag växt upp för att utforska mina minnen och därigenom skapa en plattform för mitt designarbete.För att nå mitt resultat har jag använt mig av designmetoder som ITK, intervjuer, skisser, studiebesök, materialtester, mockups samt modelleringsverktyget Rhino.Resultatet är en stol inspirerad av saker som bland annat Ornäs stugan och musikkulturen i Borlänge. Stolen består av en metallkonstruktion, trädetaljer vid fötterna samt armstöden och en sits i läder.For my thesis work on postgraduate level, I have designed a chair based on my upbringing in Dalarna. The goal has been to make a philosophical interpretation of my memories and a tribute to the region, particularly Borlänge where I grew up.During the project I have made a trip both on a mental and physical level back to the place where I grew up to discover my memories and thereby creating a platform for my design work.In order to achieve my result, I have used design methods such as ITK, interviews, sketches, field trips, materials testing, mockups and the modeling tool Rhino.The result is a chair inspired by things like Ornässtugan and the music culture in Borlänge. The chair consists of a metal construction, wooden feet and armrests and a seat made from leather..

This bachelor essay is divided into two parts, the first being a construction of a single-familyhouse and the second an in-depth study of five different isolation materials, analysed from anenergy perspective.The first part, the construction of the single-family house, has been created from knowledgeacquired during three years of studying at KTH Royal institute of Technology in Stockholm, inthe program Architecture and the Built Environment. The constructed house is a one-floorhouse of 137m2with façade plaster, situated in Borlänge, Sweden. The house has a wooden framewhich is built on a on sight cast concrete foundation, on the ground. The house?s roof is a gableroof, which has an angle of 24 degrees.

Byggsektorn står för en stor del av de emissioner som påverkar klimatet negativt. Byggmaterial baserade på trä påverkar den globala miljön mindre negativt jämfört med alternativa byggmaterial som betong. Trähusindustrin kan därför anses ta ett miljömässigt ansvar eftersom deras produkter har en lägre klimatpåverkan, vilket bidrar till att minska byggsektorns totala miljöpåverkan. Informationen om träbyggandets klimatfördelar behöver också kommuniceras för att skapa möjligheter för kunden att göra miljömedvetna val vid köp av hus. Idag tenderar trähusindustrin att marknadsföra kostnadseffektiva fördelar i större utsträckning än miljömässiga sådana.

Negativ miljöpåverkan i form av föroreningar och koldioxidutsläpp är enorm idag. Men också de stora kostnader som tillkommer när man ska försöka bygga miljösmart. Framtiden kräver av oss att börja utnyttja förnyelsebara råvaror för en hållbar utveckling. Trä anses vara ett miljövänligt material och bör användas som stommaterial i höga byggnader i större utsträckning än det görs idag. De vanligaste stomsystem som förekommer i träbyggnader är pelar-balksystem, skivsystem av massivträ och regelsystem. Dessa tre stomsystem kan sedan kombineras i tre olika byggmetoder: platsbygge, prefabricerade planelement eller prefabricerade volymer.Det finns flera aspekter som påverkar valet av stomsystem och byggmetod, t.ex.

Idag blir det allt vanligare med träbyggnader högre än två våningar. Detta tillsammans med en modern arkitektur som ger stora öppna planlösningar ställer höga krav på bjälklagen i träbyggnader. Problematiken med långa spännvidder för bjälklag i trä är att klara kraven för svikt och nedböjning. Dessa krav måste uppfyllas för att säkerställa funktioner hos andra byggdelar och för att människor inte ska uppleva att golvet sviktar eller vibrerar på ett obehagligt sätt.Ett träbjälklag bestående av limmade balkar av sidobräder har utvecklats. Bjälklaget är utformat av balkar med I-tvärsnitt i primärriktningen och rektangulära balktvärsnitt i sekundärriktningen.

This final project includes an analysis and a programme proposal for the area Bergsbrunna södra. The area is situated along the railway between Uppsala ? Stockholm, just south of Uppsala city. A new railway station is planned here, which make the area attractive as residential area. There are several values to take into consideration when developing an area. An extensive analysis and valuation may define and protect different characters and values, and also find the places most suitable to build upon. The area consists of three separate characters of landscape: the wide open cultivated fields, the hilly wooden ground and the more varying little valley. There are visual, cultural, social and ecological values to preserve. The south part of the area is woods with high natural values that borders to a national park in the natural forest of Lunsen.

The demand for renewable energy is increasing in Sweden. This consequently increases the pressure for and willingness to pay for forest fuels. One method to extract forest fuel from suitable commercial thinnings is the "long top method? (LT-method). With this method saw logs and non-delimbed tops are recovered, i.e.

The study aims to reduce energy consumption in apartment buildings where individual metering and charging of heat is applied. The aim is to develop planning and design for individual metering and charging in apartment buildings.The study is based on literature review, interviews and case study that include analysis of existing documents. Interviews were carried out with the property developer and the involved consultants who planned the apartment building Yasuragi. To investigate the differences the condominium association has noted in heat consumption between flats, the debit values of the heat were used to discern which houses that were furthest from the average consumption. On these flats there were temperature measurements and thermal photo shoots made for discriminating behavior and possible construction techniques which could be the explanation for the heat spread.Boverket shows that the consumption of heat can be reduced by 10-20% after insertion of individual metering and charging in an apartment block.

The purpose of my task was to map the pallet flows at Findus and put together as well as analyze the problems. My work has also included finding out what alternatives there are to the present pallet exchange system and suggest measures to reduce the problems.The problems can be divided into poor quality and hygiene issues. The poor quality, for instance poor strength is due to arbitrary judgements and the fact that there are companies that make a system of manufacturing forged pallets of an inferior quality compared to the EUR-pallets. These pallets are marked with stamps more or less similar to the EUR-mark and taken into the exchange system. Of course there are rules how to judge a pallet but these rules are many and sometimes indistinct and there are a lot of marks to keep track of.The most dangerous part is when the pallets lack the prescribed carrying capacity.

The study aims to reduce energy consumption in apartment buildings where individual metering and charging of heat is applied. The aim is to develop planning and design for individual metering and charging in apartment buildings.The study is based on literature review, interviews and case study that include analysis of existing documents. Interviews were carried out with the property developer and the involved consultants who planned the apartment building Yasuragi. To investigate the differences the condominium association has noted in heat consumption between flats, the debit values of the heat were used to discern which houses that were furthest from the average consumption. On these flats there were temperature measurements and thermal photo shoots made for discriminating behavior and possible construction techniques which could be the explanation for the heat spread.Boverket shows that the consumption of heat can be reduced by 10-20% after insertion of individual metering and charging in an apartment block.

The main purpose with this thesis has been to study the design philosophy of Bruno Mathsson, how he worked with his houses and the landscape surrounding them and which kind of inspiration sources he had. My work started when I during the autumn 2004 got involved in an existing project related to one of his glass houses. The glass house is situated in Kosta and has during the last fifteen years suffered from so much vandalism and decay that it has become a problem for the municipality of Lessebo. The intentions are to restore the house and to transform it to a center for Swedish design, also containing a store and a café as well as hosting one apartment for scholarship students. My task in this project was to form and develop the outdoor environment in connection to the house.