In almost every workplace today IT-systems have strong and significant roll in theeveryday work. It is therefore important that the systems have a good functionalityand that they work as an aid for the users. This thesis aims to study the systems atthe company Telge Nät and to analyse them from a usability perspective. By using thisperspective it has been obvious how difficult it is to make improvements on usability,once the system is in place. Even other larger improvements of the systems aredifficult to make at this stage and this is something that the users are aware of.

This thesis work is the result of the company Prisjakt?s wish to develop and improve its current system of opinions for online stores. The challenge was to develop a similar system that competitors are using but better. The collection of information is based on purchases and are collected from Web-shops. The purchases can then be monitored in a control panel.

Detta är ett 10 poängs examensarbete på C-nivå vid Karlstads Universitet. Målet med examensarbetet var att utveckla ett befintligt system för webbaserade kurstest så att det också kan användas för duggor. Säkerheten skulle förbättras så att studenter blir tvungna att logga in med användarnamn och lösenord när de ska skriva duggor. Resultaten från de studenter som skriver duggor skulle sparas i en databas. Vi hade också som mål att låta studenter testa systemet och att låta dem fylla i en enkät med frågor om vad de tycker om ett webbaserat system för duggor.Det resultat vi har kommit fram till är ett system som både hanterar webbaserade kurstest och webbaserade duggor.

The demand for district heating is expected to decrease in the future, due to competition from heat pumps and energy efficiency measures in buildings. Development of existing district heating systems is therefore necessary for district heating companies to maintain market shares. This Master?s thesis describes and investigates the heat and electricity production and profitability of a combined Organic Rankine Cycle (ORC) and heat pump that is integrated with an existing district heating system. The studied district heating system is utilizing heat from waste incineration. In Sweden waste constitute 20 % of the fuel mix used in district heating systems, and this share is expected to increase in the future.

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

VAV (Variable Air Volume) system has been studied in a newly constructed office-building. The goal for the study has been to evaluate how the ventilations system work in practice, if adjustments can be made to achieve an more energy efficient system and to evaluate if other alternative ventilation systems is to be preferred in the further.The degree project has been executed at Helenius Engineering Firm who is working with the environment, media systems, HVAC and energy in buildings. The building that has been studied is owned and operated by Akademiska hus.Literature studies, visits at site, inventory, review of system documentation, energy analyses, interviews, key figures, LCC, sand energy- and indoor climate simulations has been made to study the building. Where appropriate some tools from Six Sigma have also been used.How to achieve an energy efficient system and a pleasant indoor climate is studied with human health and well-being as base for the indoor climate requirements. Technical support systems such as ventilation systems have to be designed so that an acceptable indoor climate can be achieved.

Under de senaste åren har e-underhåll väckt ökat intresse. Det är en underhållshantering där exempelvis ett fordon hanteras och övervakas över internet. Inom detta område finns det olika tekniker. En sådan teknik som vuxit fram under de senaste åren är ?remote diagnostic system? eller fjärrdiagnostiska system.

Syftet med detta examensarbete var att undersöka vilka faktorer som påverkat acceptansen hos användare, inom den kommunala verksamheten, vid införande av ett datoriserat system. Med acceptans menas att användarna ska kunna utföra sina arbetsuppgifter på ett bra och lätt sätt. Studien har gjorts utifrån användarnas perspektiv.Genom att genomföra en intervjuundersökning på ett flertal kommuner där användarna använder systemet Vabas/Duf, har undersökts hur användarnas upplevda acceptans påverkas av faktorerna delaktighet, användbarhet och lättanvändhet, vid införande av ett datoriserat system. Delaktigheten vid införandet av ett system innefattar även information och utbildning.Resultatet från undersökningen visade att delaktigheten ökade användarnas acceptans. Ingen avgörande slutsats kunde däremot dras mellan acceptans och faktorerna användbarhet och lättanvändhet, då resultatet från de båda grupperna inte visade någon märkbar skillnad..

The purpose of this essay is to examine and explain how the Swedish mining court of Stora Kopparberget (the Great Copper Mountain) implemented its judicial legislation between 1641-1682. Questions are asked about which counts of indictments the court tried, which sentences they handed out, in what quantities and how these results looks in comparison with other contemporary courts. The index cards of the court judicial protocols are the primary source of information. The methods are those of quantity- and comparative analysis.The results show that theft of copper ore was the most common crime ransacked by the court. Other common crimes were (in order): sin of omission, transgression of work directions, fights, slander and disdain, trade of stolen ore, failing appearance in court etc.Fines were by far the most common sentence followed by shorter imprisonments, gauntlets, loss of right to mine possession, twig beating, loss of work, penal servitude, banishment, ?wooden horse riding? and finally military transcription.

Industrialization of construction is by some considered to be a solution to the building industry's problems about the lack of quality, high production costs, low productivity and poor environmental adaptation. Meanwhile, industrialized construction partly earned a bad reputation after the million housing program. As large-scale projects where promoted during this period, it worked very well to use the technique of construction elements. In the mid seventies though, criticism arose which claimed that the aesthetic qualities had been deprived in the corporates effort to make housing production as efficient as possible.Tyréns, Derome and CBBT (centre for building and housing in wood) cooperates in a development project to develop a building system for 4-8-storey buildings, consisting of three platforms: a technology platform, an IT platform and a processing platform. The technology platform consists of flexible, industrially built flat modules of wood and from this platform the subsystem stairwells, is broken out.

Organisations and projects use CSCW/Groupware systems for collaboration purposes. These systems and applications are in many cases using a non-transparent GUI, witch is also hard to learn. This paper present a novel system that aims towards being transparent and easy to use. This system, called CollMX, will be evaluated and different ideas for future development will be presented.  The evaluation and ideas are generated by an empiric evaluation and research in different areas related to CSCW. The research does not only focus on the area of CSCW, but also extends towards the Web 2.0 and ideas about awareness..

This thesis gives suggestions as to how to design a wooden-based wave-power buoy. The thesiswas carried out at Uppsala University in collaboration with the Division of Electricity and AppliedMechanical Engineering. The product was conceived and developed taking into consideration anumber of requirements put forward by the supervisor, Magnus Rahm. The most importantdemands were that the material used should be able to withstand pressure from the sea withoutbeing damaged and that the production costs should be low.Department of Engineering Sciences, Division of Electricity at Uppsala University was visitedseveral times to discuss issues including the various ideas with the supervisor Magnus Rahm, andwith several people in the department.The work started by studying available literature in order to get background information aboutsuitable methods available for the project and to see how similar projects were carried out. Thereason for this was to get a better understanding of this particular problem and how to solve it.After consulting the supervisor, the group decided to construct four different buoys using fourdifferent materials.

This thesis gives suggestions as to how to design a wooden-based wave-power buoy. The thesiswas carried out at Uppsala University in collaboration with the Division of Electricity and AppliedMechanical Engineering. The product was conceived and developed taking into consideration anumber of requirements put forward by the supervisor, Magnus Rahm. The most importantdemands were that the material used should be able to withstand pressure from the sea withoutbeing damaged and that the production costs should be low.Department of Engineering Sciences, Division of Electricity at Uppsala University was visitedseveral times to discuss issues including the various ideas with the supervisor Magnus Rahm, andwith several people in the department.The work started by studying available literature in order to get background information aboutsuitable methods available for the project and to see how similar projects were carried out. Thereason for this was to get a better understanding of this particular problem and how to solve it.After consulting the supervisor, the group decided to construct four different buoys using fourdifferent materials.

To support, enhance and, in the future, develop the activity within the county councils in Sweden, IT support systems are currently used to a large extent. The need to document is central to the health care organizations and the counties have come a long way in the introduction of electronic patient record systems (EPR). The aim of the EPR systems is to support the care processes and the clinical professions in their work.This is a master thesis in the area of human-computer interaction (HCI), Department of Information Technology at Uppsala University. The aim of the thesis was to describe and compare the five most common EPR systems in Sweden. The comparison will focus on some usability aspects and on how well they support the users in their clinical practice.

Denna studie bestod i att undersöka situationen på marknaden angående framdriftsanläggningar för LNG-tankfartyg. Syftet med arbetet var att skapa en relevant bild av hur situationen ser ut idag och genom intervjuer ta reda på hur den kan komma att förändras.Genom en litteraturstudie undersöktes läget på marknaden och utifrån det kunde relevanta frågor utformas. Efter att frågorna hade utformats tog författarna kontakt med olika företag som var anknutna till marknaden för LNG-tankfartyg. Intervjuer med företagen genomfördes och dessa har gjort det möjligt att analysera hur läget kan komma att förändras.Studien har visat att det finns ett system, DFDE, som dominerar fartygsbeställningar i dagsläget. Det finns även nyare system som består av gasdrivna tvåtaktsmotorer som förväntas ta över en del av marknaden.