Sand pits are a valuable habitat which can hold many sand living species including several endangered ones. As many sand habitats with exposed sand are declining, sand pits have a potential as a substitute habitat. This study was conducted to see what effect the area of a sand pit has on species number and composition of ground beetles (Coleoptera: Carabidae). Also, the effects of other environmental variables were tested, for example the proportion open sand, vegetation cover, sun exposure and tree cover. The study was conducted in the county of Uppsala in 2008 and included 13 sand pits with areas between 200 and 180,000 m2.

This is an essay about gated communities and their impact on society. The key questions of my essay are: why people choose to live in gated communities; how the city is impacted by gated communities and what the difference concerning the reasons and impact of gated communities in Florida and Sweden is, and what this difference might depend on. I am using postmodern urbanism as a starting point, and I look closer on Edward J. Soja?s theories about the postmodern metropolis.

Biodiversity is under threat in Sweden and many species are on the brink of extinction. This is mainly due to the large-scale drainage projects during the 19th and 20th century and the increasingly intensive land use in agriculture and forestry. The intensive land use with sharply defined boundaries between the production units has in many cases led to either overgrazing or overgrowing. As a result many species have been pushed back to "leftover" habitats like shooting ranges, power line corridors, roadsides, dumps, embankments and other similar areas. Therefore the question has been raised, wether or not it is needed to re-introduce large herbivores into the wild in order to maintain the biodiversity that is related to the extensive land use.This study has been conducted as a literature review and will focus on the European bison?s (Bison bonasus) impact on other species and biodiversity; conditions for reintroducing large herbivores in Sweden are also discussed.Free roaming populations of large herbivores have a positive impact on plants, insects and many other groups of organisms.

Holmen Skog AB is an important supplier of conifer pulpwood to the Iggesund Paperboard mill. After logging and transport to the landing by a forwarder, the wood is loaded on trucks for further transport, often by using separate loaders. During this handling process considerable amounts of stone material is sometimes mixed into the pulpwood and this causes problems for the industry. The aim of this study is to identify which part of the chain from forest to pulpmill, that contributes the most to this contamination. Sizes and total volumes of the contaminating stones were also investigated.

Being a trustee within the disability care will, in most cases, put big responsibility on the trustee both as a representative for the klient but also as a representative for the standards of the society. The assignment as a trustee is to strengthen the client and ease his/her way of living in the society. The Swedish legislation that controls the process and the regulation of the trustees, is by the authors of this paper preceived as kind of vauge, leaving a lot of room for interpretation. So  how do trustees comprehend their assignment and how do they actually interpret it? Using material from eight interviews with trustees within the disability care, this paper aims to examine these questions, and focuses only on the trustees and their experiences.

Competition of spruce fiber raw materials has increased dramatically in the last few years, leading to the fact that transportation costs in the current situation represents a much larger share of the total raw material cost. The Holmen-owned pulp industry Hallsta Paper Mill's location on the coast also constitutes a problem, because of the lack of raw material, which is much larger there, than for a pulp mill located in the hinterland. For a coastal industry it?s therefore natural to import much of the raw material by boat or to buy it from the timber terminals, in order to maintain good profitability. The purpose of this study was to analyze how the size of Hallsta Paper Mill timber supply area, without competition, with competition and with terminal use, affects the company ?s transport costs.

This report is part of an Bachelor of Science work in forestry, conducted for the community of Borås, Sweden. In order to create a forest management plan for the area of Hestra, a survey was conducted. People living in the area were given the opportunity to reply to the survey. The questions in the survey are both personal and forestry-related. The aim is to reach out to the different categories of people when it comes to age, living and the different aspects of visiting the woods.

The background for my thesis is the fact that with rising electricity and oil prices it becomes interesting to calculate on alternative heating systems. I have chosen to calculate upon my parents? farm, which today heats the dwelling house with wood. This is very time-consuming work, time which could be spent on other work. The main objective for this study is to compare three different heating systems to decide how they differ considering effort and cost. The result from the calculations was that grain-heating system demanded the least amount of work, but the total cost was a little higher compared to chips heating. Chips heating required half as much work as today?s wood heating and had a little lower total costs compared with the corn heating. Which system to choose largely depends on how the own work is valued.

This bachelor thesis contains the findings of an investigation into the laying of wedge sawn wood flooring. The advantage of wedge sawn wood flooring is the usage of more material from each board reducing waste. The boards follow the natural profile of the tree where the root part of the board is wider, and the top part is narrower. The technique involves placing boards side by side with adjacent boards in opposite directions. The thick base of one board is neighbored by the narrow top of another, this creates a pattern of wedges in alternating directions, known as a ?root and top? system. Existing literature into this type of flooring is sparce.

Outdoor housing of horses? best fulfils the horses? need for physical activity and it is an alternative to the more cost and energy demanding indoor housing in stables. Furthermore, if outdoor housed horses have access to shelter they can generally cope well with adverse weather conditions such as high or low ambient temperature, heavy rain or strong winds. In this study, the daytime shelter-seeking behaviour of three groups of horses housed outdoors was studied during the summer. The aim was to evaluate whether shelter use is related to weather variables (e.g., ambient temperature and wind speed) and insect harassment. The shelter-seeking behaviour was studied for three different groups of horses: Group 1) eight individually housed horses in paddocks that had access to three different shelter types (C: closed on three sides with roof, R: open on three sides with roof, W: closed on three sides without roof), Group 2) 25 group housed mares with foals on pasture with access to shelters C, and Group 3) ten mares without foals on pasture without access to shelter. Each group was studied for eight days.

This thesis engages the topic of test methods for wood adhesives. Two test methods were evaluated, EN 302-1, a European standard, and ASTM D905, an American standard. The total amount of specimens manufactured and tested was more than 500. The adhesive bonds were tested in shear with an increasing load on the specimen until failure.The adhesives used were epoxy-resin, phenol-resorcinol-formaldehyde and a 2-K polyurethane. The test programme included five different types of intentional errors per method, in order to investigate the sensitivity of the test methods.

Tomo Hugglink (TOMO Skog) is an innovation for harvest and transport of biofuels. The system consists of a truck, a chipping unit and crane mounted on a link and a wood chip trailer. The system works in such a way that the chipping unit is disconnected and placed on the site and wood chips are loaded directly into the wood chip trailer.The aim of this study was:- To examine the performance of the TOMO Hugglink system under different conditions such as the size, placement and quality of the pile.- To calculate the cost per raw ton for two vehicle combinations at different transport distances and to examine the effect of a reduction in set-up time and an increase in load weight.- To identify possible improvements with the TOMO Hugglink system.A time study was conducted within the thesis work to make it possible to determine production and time consumption. In the subsequent economic analysis the cost per tone at different transport distances was calculated for two different lorry concepts. Furthermore the effect of a reduction in set-up time and an increase in load weight was calculated.Under current conditions the utilization of the chipper is low and only 29 % of the total system time is occupied by chipping.

German regional policy has changed from a strategy of redistribution to a regional growth focused policy- strategies, which are often seen as opposites. Both policies, however, still have to relate to the constitutional objective ?to achieve equal living conditions for the country?s citizens.?This paper examines what effects a political change may have had on the interpretation of the German constitutional objective. Its aim is to examine German regional policy and its relationship to justice, using John Rawls? A Theory of Justice.

Fuel pellets are in Sweden mainly produced from sawdust and cutter shavings. Before the pelletising process the raw material is dried to attain consistent moisture content and ground up in a hammer mill. In the densification process (pelletising) the ground material is forced through holes in a rotating die. This heats up the wood particles which cause them to soften and self bond. After the process the pellets are cooled, sieved and bagged. The milling process creates a wide range of particle sizes.

In this work I have tried to reconstruct the forest history within Särna-Idre forest common in northern Dalarna from the 19th century until present time. The Särna-Idre region has been an extensively used landscape for a long time. Pollen which indicates grazing has been found in samples orginating from the 10th century. Early travellers from the 18th and 19th centuries seem to have been passing trough a "used" landscape. Burned forests on naked ground are described as common. Also large areas are mentioned as undisturbed with lots of large trees, snags and dead wood.