This thesis analyzes the effects of export subsidies on Swedish cereal export. The analyzes are based on data on cereal export from Sweden to countries outside the EU from 1990 to 2003. In 1995 Sweden became a member of the European Union. Before the membership, the Swedish agricultural policy was decoupled in a larger sense than the European CAP was, which means that the Swedish producers had decreased their production more than the European farmers. When Sweden became a member of the EU the production started to increase again to an EU level.

Portable is a project with its starting point in plastic bags, how they negatively affect our planet and how people´s patterns of behavior and qualities of life are affected when people try to live more envi¬ronmentally friendly. Now we have reached the point when peoples way of living and consuming in the western world has to change. This is nothing new and we can now see that sustainability is start¬ing to get attention in every area.Today plastic bags are used on average for 12 minutes. Only one out of 200 is reused, and then only once . This is not sustainable at all.

This paper is written as an examination paper at the University of Jönköping. The subject is chosen by Peab Sweden in Jönköping with whom further cooperation has been hold. The aim is to compare building methods and building materials in Sweden, Finland and Germany for further inspiration for Peab?s own market.BackgroundThe development of the construction industry develops new materials and methods to the market which has been forced by shorter construction times and the environment aspect. To pursue the development, further knowledge exchange should exist between the countries.

In this thesis an energy analysis of ethanol production at the ethanol plant of Lantmännen Agroetanol in Norrköping has been performed. The ethanol plant has been studied in combination with Händelöverket, the combined heat and power plant which provides the ethanol process with steam. The purpose of this study was to determine the energy consumption for the whole production chain from grain to ethanol. The analysis has included the energy consumption for cultivation of grain, production of chemicals, the production chain for wood chips, the steam production and the ethanol plant. The grain and wood chips are both considered raw materials there for the energy content in these are not included as energy input in the system.

In this thesis an energy analysis of ethanol production at the ethanol plant of Lantmännen Agroetanol in Norrköping has been performed. The ethanol plant has been studied in combination with Händelöverket, the combined heat and power plant which provides the ethanol process with steam. The purpose of this study was to determine the energy consumption for the whole production chain from grain to ethanol. The analysis has included the energy consumption for cultivation of grain, production of chemicals, the production chain for wood chips, the steam production and the ethanol plant. The grain and wood chips are both considered raw materials there for the energy content in these are not included as energy input in the system.

This study is a value chain analysis for timber in East Africa. It was commissioned by Vi Agroforestry, a nongovernmental organisation registered in Kenya, Rwanda, Uganda and Tanzania engaged in a rural development program that involves promoting tree planting and enterprise development (Vi Agroforestry, 2012). The purpose of the study was to identify and describe common value chains for timber in the countries where Vi Agroforestry operated. Value chain is a concept and a framework describing how to structure information regarding activities included in satisfying a certain customer need, e.g. procurement, logistics, transactions, production and marketing.

This paper aims to study the possibilities and challenges the car industry has to face with applying information technology in cars. The goal is to describe and analyse all the existing technology in the cars out on the market today as well as future possible technologies in cars. By interviewing people who has been working or are working with information technology in cars, we aim to clarify the obstacles and opportunities in the process of implementing informatics in cars. With this knowledge we want to learn more about Ubiquitous computing and how humans interact with Ubiquitous computers today and will be interacting in the future. Technology has a rapid development pace and we find it interesting to examine how the car industry can keep up with the rapid development pace of technology. .

This study views literary authors as brands and their books as products. The essay examines if different marketing activities will influence attitudes and intentions towards these brands, depending on how famous the author is and how much knowledge the consumer possess about the product category. The theory, which the hypotheses are based upon, mainly consists of research about culture, brands, attitudes and intentions. The study is quantitative and has an experimental design consisting of different written scenarios. These scenarios are based on background information about a fictive fiction author and type of marketing campaign.

The main goal with this thesis report was to come up with ideas of how to make the use of energy more effective and thus save money for the company.First a survey was made to find out where and how the energy consumers were divided within the company. The results were then used in calculations to find out how much money that could be saved and how long it would take to get back the investments.There is a big potential in saving money by recovering heat from the UV-lamps with a heat exchanger. It would also even out the pressure in the factory which is a source to heat loss and a cause for discomfort amongst the employees. It?s possible to save 105 000 kr in a year and the money needed for the investments is 600 000 kr.By using the recovery air more effectively the company could save up to 250 000 kr a year in lowered heat purchases, but this would require the use of automatic dampers.If you reschedule the running times for the wood chipper and invest in some kind of load management, for example Sydkraft?s ?Energidirigent? you can save at least 42 000 kr.

The fashion industry in Kenya is slowly growing. The middleclass is getting bigger and theinterest for fashion among these consumers is increasing. One major problem for the growthof the industry is the extensive second hand trade, which has given several problematicaffects. The textile production has almost disappeared, the western influences are evident andthe consumer?s price sensitivity is prominent.The aim of this thesis is, by conducting a field study; to qualitative examine how to develop astrong domestic fashion brand on the Kenyan market and to give a foundation for a brandingstrategy for people involved within fashion in Kenya.

 The sawmill industry is a relative fragmented industry that is in an economic upswing andwith a hard competition. The customers have high demands on their suppliers and the highcustomer demand make it necessary for the companies to make a streamlining in planningand production. For that reason it is very important that the planning- and productionprocesses aren?t to complex and with a simple structure.The purpose of this report is to study and map out a marked out part of a planning- andproduction process, from adjust works to final delivery, at a company in the sawmill industry.Different methods have been used for the report, among others interviews and subordinatedmaterial.We have mapped out a marked out part of the planning- and production process at theCompany. This part we have studied, and we have analysed the process it self and otherthings connected to the process.We see the planning- and production process in the Company as complex.

This Master Thesis covers the concept of Green Cars. The background to the research area is the high and rapidly growing number of cars, which together with other factors ad to the pollution of the environment. Under the Kyoto agreement the signing members agreed to lower the emissions of green house gases, further on the EU has a 3-pillar strategy on carbon dioxide and cars. Included in the EU strategy is a voluntary commitment from the car industry to reduce carbon dioxide emissions from new cars. The easiest way of lowering the emissions is by using alternative fuels and engines.

The purpose of this project was to invite a changed perception of active sitting, to introduce a more active way of sitting in office environments and destigmatize an active sitting posture such as straddling by giving active sitting products conscious aesthetics based on environment and positive associations. The goal with this project was an active sitting product for office environments with aesthetics considered encouraging to movement in a relaxed way, regardless of age and gender, and connect to materials and aesthetics related to activity, experience and recreation. Horseback riding, retro style surfing and skateboarding was an entry of investigation. The project was based on existing active sitting products, their function and production techniques. It was not a part of the project to investigate new models of sitting.

This thesis aims to describe how a fashion designer should balance art and commerce in order to succeed in the fashion industry. We aim to define the Swedish term KRÄDD, and sort out how a designer or CEO in the fashion business should relate to the term, as well as the balance between cultural and economic capital. We present theories of the origins and fluctuations of fashion, as well as social studies on cultural capital, and brand building. The study is made in a qualitative manner where the empirics consist of interviews with 13 respondents that have different positions in, and experience from the fashion industry, including designers, journalists, buyers, a CEO and a PR-professional. In our conclusion, we emphasize the need for a balance between cultural and economic capital in order to succeed as a fashion designer.

AbstractTitle: The New Type of Music Industry at AllEars.se (Den nya musikbranschen på AllEars.se)Number of pages: 49 (53 including enclosures)Author: Viktor BackemarTutor: Else NygrenCourse: Media och Communication Studies CPeriod: Fall 2007University: Division of Media and Communication, Department of Information Science, Uppsala University.Purpose: The purpose of this paper is to compare AllEars´ own view of the website AllEars.se to an observed view of the same site. The comparison is based on theories regarding the Internet in today?s society, convergence, communities and collective intelligence, interactivity and participation, and business in today?s society.Method: Since the paper has a purpose to compare two views of the same website there are two main methods in use. AllEars´ own view has been created via an interview with the company?s CEO, a press release that was released in connection with the launch of the website and texts found on the website.