During the twenty-first century the price of forest land in Sweden has increased heavily. Buying forest land has become more common and the stakeholders have grown in number. The countries around Sweden have through the globalization become connected in the market of round wood and wood products. The price of forest land and round wood are also close connected. The goal with this report is to make a comparison of forest land prices between Sweden, Denmark, Norway, Finland, Estonia and Latvia and to see how the prices have developed in the period 2000-2011. The prime factor in the comparison, except the direct price difference between the countries, is the round wood prices. The round wood prices give information about the economic situation in the countries and play an important role in the return on the forest land. The prices of forest land shifts heavily between the countries.

Fuel pellets are a refined bio fuel mostly consisting of residues from sawmills and wood industry. At Rindi Västerdala AB's combined bio energy plant in Vansbro fuel pellets are produced, while the waste heat from the process is used for district heating. The pellets are produced from sawdust, wood shavings and dry wood chips that is dried, milled and pressed into small cylindrical rods. The advantage of refining the wood material in this manner is that the energy value is greater per unit volume and unit weight, thereby the cost of transportation per energy unit is reduced. Also, less storage space is needed.Pellet manufacturing is a complex process since many parameters affects the final results.

Storage of biomass is often associated with problems such as heat development, dry matter losses and reduction of fuel quality. The rise in temperature can potentially cause a risk of self-ignition in the fuel storage. Moreover, emissions from storage piles can cause health problems in the surrounding. The dry matter losses and reduction of fuel quality can have economical effects. The aim of this thesis project is to develop guidelines on how to store large amount of biomass at Vattenfalls heat and power plants in an optimal way.

This report is a bachelor's thesis of two students from the Energy and Environment degree at KTH Stockholm. Grinda is an island situated Stockholm archipelago. Skärgårdsstiftelsen is landowners and manages the area. Grinda Wärdshus, a guest house located in the island, currently uses an oil-fired boiler as a heating system. The aim of this thesis is to investigate whether wood chips or pellets is, from a sustainability standpoint, a suitable heating method for the guest house.

Wood has always been an important material for people, and it is used for many applications. As for example, fuel for cooking and heating houses, construction materials and for constructing means of transport. Since wood also is a material that with time biologically degrades due to activity by micro organisms and wood fungi it is important to find ways to protect and further lengthen the life span of the material when in service. One method is to decrease the amount of water in the material by impregnation with an hydrophobic oil. The Linotech method which uses only pure linseed oil is one such possible method. The aim of this study was to investigate the possibility to at the same time impregnate and stain/colour wood samples of pine and spruce by using the Linotech method.

This master thesis consists of an investigation of the profitability per hectare in privatly owned forest land. The investigation is based on data collected from Skogsstyrelesen, Riksskogstaxeringen and Skogsforsk. During the last twenty years the prices on pulp wood and saw log have substantial decreased, but during the same time the the volumes from final felling have increased and the cost for felling has decreased, this investigation shows how the netprofit per hectARE after final felling has changed between year 1980-2005 This investigation shows that that the netprofit has stayed on a stable level during the years 1985-2005 even though prices pulp wood and saw log decreased. Much indicates that the demand of swedish pulp wood and saw log will continue to be strong or even stronger wich will give increased prices and an higher netprofit after final felling in the future.

Wood pellets are an upgraded product of residuals from several wood processing industries, for example saw mills and pulp industries. The pellets are produced by pressing the milled and dried sawdust to cylindrical units with a higher density than the initial raw material. Pellets have great benefits compared to the raw material: high energy per volume, good transport and storage properties and homogeneity. Several parameters collaborate in the whole process, which makes it complex. Wood is a heterogeneous material, chemically and structurally dependent on wood parts, habitat and storage procedures.

Uppsats för avläggande av filosofie kandidatexamen i Kulturvård, Bygghantverk, 22,5 hp 2014.

To save energy it?s popular to build houses with low energy loss. In these houses the walls are keeping a lower temperature in the external side which leads to a higher relative humidity. In addition more material, such as wood studs, are used which means that there is more moisture to dry. More moisture in combination with higher relative humidity may pose a higher risk of microbial growth.

Dead wood is important for many species. The amount of coarse dead wood (diameter >10 cm) is much lower in managed forest than in unmanaged forests. Stumps constitute the largest proportion of the volume of coarse dead wood in managed forests. Since stump harvest for biofuel may increase, the amount of dead wood will decrease even more, which may threaten biodiversity. The first aim of this study was to compare the amounts of fine woody debris (FWD, .

The private forest owners play a key role in the supply of round wood to the Swedish forest industry. Today it is a keen competition between forest companies about the wood from private forest owners. In order to get access to the wood from the private forestry you need to be an attractive collaboration partner, who can offer long-term collaboration, service at top-level, and acting for good prices to the forest owners. This work aims at analysing the situation on the market today. It gives Sveaskog purchase department a good view of the forest owners? opinion in general about the existing purchase activities. Forestry service level and timber prices are determining factors for a successful relationship between forest company and forest owner.

The basic ingredient of paper is the individual wood fibers. The property of the fibers depends on a variety of factors e.g., method of pulp production and processing. The final sheet quality depends in part on how the fibers interface between each other and therefore factors that affect the fiber size are of interest.The flexibility of the fibers depends in part on the pore water i.e., the fiber swelling. The sheet becomes less flexible at low water content which gives a loss in strength. Thus it becomes desirable to increase the water uptake.The experimental investigation described in this report consists of exposing the wood fibers to different ions and ionic strength and then measure the pore size by thermoporosimetry where a DSC (Differential Scanning Calorimeter) is used.

What is located on the bottom in the water outside of Birka? Remains of a water palisade or jetties and other constructions.Birka a Viking Age town that existed between AD 750 and 975 was located on the northwestern part of the small island of Björkö, in the Mälar archipelago of the Baltic Sea in Sweden. The Town was protected onshore by a hill fort and a town rampart. It is a widely spread assumption that Birka had a water palisade as a part of its defense. There are logs and other remnants on the bottom of the lake dating back to the Viking age.

In forestry there are always needs of forest data to make good strategic decisions of different actions and economic winning. Usually this data gets from field-estimations made by forest workers with expensive costs and sometimes unsatisfied quality. StoraEnso Skog is a great forest company in Sweden and they have part of the responsibility of the forest own by Bergvik Skog. Bergvik Skog is owner of 1, 9 million hectares productive forest land. Both Bergvik and StoraEnso have great interest in new inventory techniques to get the important forest data. The company Foran Remote Sensing offers the opportunity with airborne laserscanning of forest and forest land. Foran got the mission of Bergvik and StoraEnso to laser scan Bergviks possession in Älvdalen, Dalarna.

Disturbances, such as fire and wind, are important for saproxylic beetles (= beetles depending on decaying wood) to gain substrate in boreal forests. Clear-cutting is an example of a man-made disturbance. Measures such as prescribed burning have been made to resemble natural disturbances. The aim of this study was to see which clear-cut characteristics are important for the occurrence of the saproxylic beetle Upis ceramboides. This is a species favored by open habitats and is said to respond positively to forest fires. The distribution area in Sweden for this species has decreased during the last two centuries and I wanted to see if there were differences between clear-cuts in Hälsingland, where it is very rare and decreasing, and Norrbotten where this study was conducted.