The global climate-change means increasing mean-temperature and higher precipitation in Sweden, which leads to shorter periods of frozen ground in the forest. At the same time the harvesting machines are getting bigger and more powerful. The forest industry aim at an even wood flow, and the ground damage has to be as low as possible. The two biggest causes for ground-damage is the bearing capacity of the forest ground and the ground-pressure of the harvesting machines. The aim of this study was to find out some rules for the machine choice considering ground pressure, when harvesting on ground with low bearing capacity.A field study, using a Valmet 890.3 forwarder, was carried out where different ground pressures and their effect on the ground were tested on two different types of ground.Additionally, an inventory of damaged harvesting grounds was made.

A change towards using more biofuels than fossil fuels is taking place in Sweden, and in many other parts of the world. This makes the use of fuel pellets increasingly popular, causing a greater demand for sawmill sawdust products. There is a trend towards the use of multiple types of shredders, instead of a single type in each sawmill. The purpose of the study was to characterize the different flows of saw particles that can be found at Sävar såg when cutting thick or thin wood with different cutting techniques. The saw particles size, shape, moisture content and heat value were analysed by the cutting stations: first cutting fast and slow, second cutting fast and slow, grading fast and slow and planning.

Reading spaceFurniture for reading for the new city library of GöteborgThe main purpose of my project has been to inspire people to read books at the library. I wanted to create something very site specific and chose a room on the second floor of the new city library to work with. To be able to relax, feel inspired and to concentrate on reading, the visitors of the library need to experience a sense of security. My solution to the different conditions or problems in the room and the needs I identified is a seat hanging inside a frame. When sitting down in the seat, the frame is low enough to see over but it is still experienced as a private spatiality.

Wood for commercial use is harvested from forests using forest machines like harvesters which folds, branches and cuts trees and forwarders which transports logs to a landing area for further transport to a processing facility. Future forest machines have to be much gentler to the machine operators and forest soil than today's machines. Hence new machine solutions must be developed and tested. A practical way is to develop a physical scale model which can be used as a test-bed to incorporate different types of solutions for suspensions, cabin damping, tires and tracks, crane and overall architecture. The aim of this project was to develop such a 1:5 scale model of a forest machine, named as ?Skogbil.A scaling strategy was employed to arrive at important scale dimensions and specifications ofSkogbil which would be comparable to the full scale model.

Sweden have 419 000 km road in the country and about half of these roads is forestroads. The forest road net most important mission is to make it possible to deliver wood from the forest to the industries. With a raw material that is spread over a large area the road network is important. Each year has the forest road network been extended with about 1 700 km new roads. To decide if a new road is to be built different forest road cost estimation models has been used.

This work was conducted during spring and summer 2012 together with the company Uppsala Academy of Management as the principal. The two main objectives for the work are that: ? Make a comparison between the measured volume in the standing forest and the measured volume at the industry on Uppsala Academy of Managements actual stumpage sale volume to see how well it conforms. ? Examine if the buyers see any particular advantages or disadvantages of actual stumpage sale volume and what they think of Uppsala Academy of Managements actual stumpage sale volume and structure in general. I chose to use actual stumpage sale volume from the tree years 2009, 2010 and 2011 in my work. I divided the actual stumpage sale volume following four categories which was pine, spruce, pine/spruce and seed trees. After that I picked out sixteen actual stumpage sale volumes from each category to be a part of the work.

AbstractMycotoxins are secondary metabolites produced by filamentous fungi. Moulds producing mycotoxins grow on various crops that are used as horse feeds. Since the treatments of mycotoxin poisoned horses are limited it is important to prevent production of mycotoxins in feed. The major mycotoxin producing moulds in horse feeds are Fusarium spp., Penicillium spp. and Aspergillus spp.

Fungi are everywhere around us and recently, there has been an increased interest in their role and importance in the forest. The fungi have several strategies to acquire energy and nutrition; one example is a mutual symbiosis with trees and plants - another being dissolving organic materials. Attempts have been made to better understand the circulation of nutrition in coniferous forests, and how fungi cooperate. Trees and plants have adapted with mycorrhizae and are now interdependent which is important to consider in forestry. A great number of fungi depend on dead wood and old trees to set fruiting bodies and spread further. These fungi also create environments for other species, such as birds and insects. The vegetation of a forest is determined by a series of factors; tree species, how old the forest is, soil type, as well as the ability of the fungal spores to spread and establish. Furthermore, in determining vegetation, the fungi?s ability to compete in the soil matters. These factors are nearly unexplored. Researching fungi knowledge and interest, a survey was distributed to five groups of people. The groups included forest owners, high school teachers, high school students, senior citizens, and a fifth group - ?o he ? - consisting of people of mixed ages and backgrounds.

Glulam is a product that was engineered to make use of timber in a more efficient way. Bychoosing timber of similar quality and discarding natural defects during production, thedevelopment of a stronger cross-section is achieved.Carbon fiber is a relatively new material with a high tension capacity. This feature is used toexamine how the bending capacity of the beams improve by adhering carbon fiber laminateson the lower edge of the beamsThe strength of the material is tested with three experiments: carbon fiber on the bottom of thebeam (a), carbon fiber attached to the lower sides of the beam (b) and carbon fiber in thebeam, covered with a layer of wood (c)The results show that the first case, where the carbon fiber is attached to the bottom of thebeam, gave the best result with an increase in capacity of 59 % compared to the nonreinforcedcontrol. The other two cases also show an improvement in capacity, beam-type 3had a capacity increase of 47% and beam-type 4 increased with 25 %Tests were also made with glulam beams reinforced with fiberglass, but these tests were notanalyzed in depth because the purpose was to compare the capacity to carbon fiber. Thisbeam improved its capacity by 40.3%.The tests show that carbon fiber as a reinforcement material for glulam is a good choice whenthere is a requirement for stronger cross-sections in both new production and renovation ofold buildings.

Kisa Courthouse in the south of ?sterg?tland is a house built in the early 19th century with a typical neoclassical style. With clearly regular symmetrical wooden facade scheme with a central main entrance. The main entrance is a wooden double door with richly decorated portico. the crown moulding above the door consists of a band of dentils with a cornice moulding at the top.

To plan and build a garden in Dubai has other conditions and challenges than what you experience in Sweden. The heat, wind and lack of water makes the need for durable plants, a good design and landscaping important if you want to have the opportunity to use your garden during most of the year. The soil is poor of nutrients, alkaline and sometimes saline, witch makes supplying the soil with organic material and various fertilizers necessary if you want to be able to plant a bigger range of plant material in your garden. Another important part is to provide your garden with a good irrigation system that should be put into the ground before planting so that the plants are given a more even irrigation. It?s relatively green scenery you meet and to me it?s in a way surprising since the country with its climate is rather harsh for the purpose of supporting plant life.

Playsam in Kalmar AB are world famous for their design of the toys they sell. Together with their CEO Carl Zedig the goal was to find a new product for the company.  The process has far from been linear, I started off in one direction, got rejected, turned another way and we finally decided to create a rocking horse in a De Stijl style. At the same time taking consideration of the demands from Playsam and myself.Playsam?s products are archetypes of ordinary objects around us such as the car or the aeroplane. The company mainly produces its toys in wood and the stylized shape together with the blank painted surface has become a hallmark for them.De Stijl, the Dutch art movement containing artists, designers and architects such as Piet Mondrian, Theo van Doesburg and Gerrit Rietveld.

Background: According to many authorities Trademark consideration will within the companies become all more prioritized objectives for competitive advantage and a strong organisational structure.Trade marking is becoming an important tool, not only Production oriented companies apply this on their products or services whereas it is today spread in many different sectors.Problems: On the basis of theoretical and empirical studies, we will try to see how a trademark is built up.This will guide us to our questions at issue:? How has the actual process for HTF been in order to strengthen and to build up their trademark, how have they achieved this in practice?? What are the underlying criteria?s to for this work and what role has the consultant company BMN in the actual process?Aim: The authors have for intention to create an understanding on why there is interesting for a trade union organisation like HTF to carry out a trademark development investment. A further understanding will be to highlighting a strong trademark's advantages and possible disadvantages.Results: As a trade union organisation where the relationship to the members and the potential members is becoming all more important is the interesting to highlight their trademark clear and in addition to that contribute to building and establishing strong relationships. on the basis of this study we can state that it is now one of the most important support activities that as a trade unions to highlight its core values through trademark. As a trade union, one can to a large extent work with and to apply the market the economic mocks-up for trademark build up.The most important aspect is that we can state , in the future developed to concentrate more on communication, positioning, segmentation and diversification, which the trademark act as intermediary.

The requirements for operative planning activities are increasing. The forest industry wants to gain better control over wood flow. A felling that is more market adjusted is desirable. However, this causes problems in the operative planning process because of the data collection methods used today. Data about timber assortments and data about the distribution of the tree diameter, etc., are often lacking. Airborne laser scanning is used to a greater extent than before for estimation of forest variables and should perhaps be used to the same extent in operative planning activities as well.

The resting area is the most important place in the barn for the dairy cow, sometimes called the heart of the free stall system. Inadequate design of the lying area, and lack of or poor quality of bedding materials may reduce the hygiene of the stall. Poor management regarding the cleanliness of the resting area may lead to poor animal hygiene and increased bacterial growth. This in turn will lead to increased risk for environmental mastitis as well as impairing milk quality through contamination with spores. In this literature study the most commonly used bedding materials; straw, sawdust, wood shavings, clean sand, recycled sand, peat and recycled manure solids, are compared to one another with regards to their ability to resist bacterial growth. Effects of adding hydrated lime to bedding materials have also been studied. Most bacteria need humidity and prefer a quite high water activity to be able to grow.