This report is a thesis work for a B.Sc. in Forestry at the School for Forest Engineers, SLU. The aim of the work was to compare two different pricelists with the actual output from a harvester. The results have also been compared with a volume estimate of standing trees done by the Swedish Forest Agency and the ?true? value registered by the Wood Measurement Association. The study confirms that the output calculated by the computer on the harvester is more reliable than the volume of standing trees estimated by Swedish Forest Agency. .

Södra Skog chose in 2011 to convert the saw mill in Traryd to a gradually refined sawmill of hardwood. In 2009, they had also acquired the hardwood sawmill in Djursdala. This was strategically important for Södra's business since the demand for hardwood products has increased. The standing volume of deciduous trees in Sweden is today approximately 524 million m3sk and it has increased rapidly in recent years. However, the deciduous forests are to a large extent located in areas that are set aside for nature conservation and is thus not available to the industry.The goal of this work is to create a simple and reliable method for mapping of deciduous wood volumes in areas where Södra Skog is operating (Götaland excluding Gotland).The material that is used is raster databases with estimated forest attributes (kNN-Sweden), data from National Forest Inventory (NFI) and forest management plans.

The purpose with this project is to compare different fuels when investing in a central combustion station at a case study farm. I have chosen to write about biofuel from an economical perspective. This because the heating costs are steadily increasing. Also because the farm in this case study has several different heating systems, which are neither profitable nor easy to work with. I have made calculations regarding usage of splinter, wood and grain for the heating system.

Industrialization of construction is by some considered to be a solution to the building industry's problems about the lack of quality, high production costs, low productivity and poor environmental adaptation. Meanwhile, industrialized construction partly earned a bad reputation after the million housing program. As large-scale projects where promoted during this period, it worked very well to use the technique of construction elements. In the mid seventies though, criticism arose which claimed that the aesthetic qualities had been deprived in the corporates effort to make housing production as efficient as possible.Tyréns, Derome and CBBT (centre for building and housing in wood) cooperates in a development project to develop a building system for 4-8-storey buildings, consisting of three platforms: a technology platform, an IT platform and a processing platform. The technology platform consists of flexible, industrially built flat modules of wood and from this platform the subsystem stairwells, is broken out.

The so called ?ByggaF-method? is a relatively new Swedish method to stop moisture from being built into a building. The method should prevent damages on buildings as a result of mould growth and moisture. The purpose of the method is to include moisture control in the entire constructionprocess, from the projecting phase and all the way to the management phase. Up until now, there is no proof if the method is profitable or not and no studies have been made on the topic.

The present study examines a new production line of glue-laminated wood (glulam). The glulam is produced from non-planed boards of spruce, which also is convex, that is pressed together with high pressure during the gluing. According to a economic calculation, the material has a economical potential mainly on account of the absent planning. The study mainly found out that the shear strength of the material tolerated the demanded values in standard SS-EN 386, but the delaminating values did not. Since there are more areas to be studied around the material, the prospect to achieve the right delamination values is seen as positive..

There are many different recommendations on how to keep pelargoniums over winter, but most of the recommendations suggest ?the higher the temperature, the more light and water the pelargonium needs?. The purpose with this paper is to try to explain the best and the worst results that are achieved with different storage alternatives of zonal pelargoniums. The results are based on an orientating investigation carried out in January-February, and a questionnaire that members of the Swedish Pelargonium Society answered to. Both the orientating investigation and the questionnaire showed that zonal pelargoniums are best stored light and cold but frost free. They should be irrigated according to their needs which is when the soil is dry, about every second to third week. Zonal pelargoniums are very resistant to drought and can survive without water for at least 44 days, both when kept under light and cold as well as under light and warm.

The construction industry can contribute to a healthier sustainable community. A development that is going on right now is by using more prefabricated volume- and plan elements on the construction sites. Building with this method not only provides a benefit to the environment, but also reduces production rates by taking up to 80 percent less time to build. By building in this way it will be easier to recycle and keep all the material that otherwise would go to waste. Also by building inside a protected environment, the material retains its good quality.This report will take forward proposals on further development of prefabricated volume element of wood, by first presenting this construction methods advantages and disadvantages..

Introduction: This study aimed to investigate the validity and reliability of the 20m multistage shuttle run test (MST) for elite ice hockey players as a predictor of the maximal aerobic capacity and the how the result is affected by the players age, aerobic and anaerobic capacity, body composition and test surface. The purpose of this was to find out the potential of the 20-m shuttle run test as a measuringtool for the maximal aerobic capacity in frequent testing periods during the season. It is very interesting to be able to administer this easily because the competative phase of the season is very long compared to the pre-seasonal phase and earlier studies have shown that the aerobic capacity is being lowered during this competative phase of the season for elite icehockey players.Methods: 34 elite ice hockey players participated in this study (20.0±3.6 yrs, BMI 24.2±1.6 and VO2-max 58.0±4.8 ml O2?kg-1?min-1). During 3-5 days they underwent 2 MST tests (wood and rubber surface), treadmill running with VO2-max assessed with open-circuit technique, Wingate10% and FFM-assessment with underwater-technique.

With the increasing costs in concentrate the importance in producing ensilage with a high quality is becoming more and more important. To succeed with this goal it is of importance not only to harvest in the right period, but also to be able to store the ensilage without a decrease in quality and nutrional values. To maintain a good ensilage the covering of the ensilage must be carefully made. An unsuccessful covering causes mould to grow in the ensilage, which both increases the work load and also increases the amount of feed which is wasted. A bigger amount of spoiled feed also increases the risk of feeding spoiled feed to the cattle.

In 1994 a new Forestry Act was accepted in Sweden. One of the aims of the law is to raise consideration forpreservation of biodiversity. Since the new law got accepted and some time has passed, there now lie someinterest in examining whether the law has been effective towards its purpose. Methods suitable for analysishave been examined during this study. The content of this pilot study is based around five parameters whichcan be used to validate the effects of the new law.

At seed-growing the aim is to produce a commodity with high germination capacity, good soundness and purity, and also slight admixture of seeds from other species. The capacity of germination and the vigour of the seeds may become impaired in consequence of mechanical damage, infection of diseases, growth of mould, attacks of vermin, high drying temperature, secret germination, sprouting in the ears etc. The germ belongs to the outer and most unprotected parts of the seed, and consequently this is much exposed. Even quite sound seeds can instantaneously have low capability of germination. It can be due to the fact that the seeds are in rest of germination, i.e.

I have studied and worked with various joints and interpreted twenty-six of them to small models. I then placed these into a template so that I could record the properties and their expressions.The protocol show what the joint looks like, and what its strengths and weaknesses are. Moreover, they are translated into a freer text, a poem, that describes what I think and feel about the joint.Based on the protocols, I have selected a number of joints which I then interpret into furniture. I have chosen to move forward in slightly different ways with different joints. Sometimes it is the expression of the joint that has given birth to a new idea, it may be the poem itself that led me on to a form, combinations of joints and that I found interesting, and so on.My interpretations are then further translated into new poems that describe what I see and what I feel when I assemble and disassemble each piece of furniture..

Generally, the economic health of Swedish roundwood truck transport companies has not been good. Profitability is important for maintaining the stability in the transport business, which is a condition for long-term transport planning in the forestry sector. The scope of this study was to identify probable factors influencing the profitability of roundwood truck transport companies and quantify the influence of these factors on economic results. The study was carried out at a major roundwood truck transport organisation in mid-Sweden and was implemented in four steps. In the first step economic results from the haulage contractors were collected and a random sample was taken from accounted net margin for the account year 2005/2006. In the second step hauliers were interviewed to identify probable success factors. At the third step data for identified factors were gathered through a questionnaire.

I dag råder det brist på död ved i Sveriges skogar. Detta på grund av det intensiva skogsbruket där man kalhugger och plockar bort all liggande ved. Dock är det viktigt med många döda träd i olika nedbrytningsstadier för många skogslevande arter. Svenska skogar har få urskogar där naturliga avdödningsprocesser av träd får ske och därför minskar den biologiska mångfalden i skogen. Tre arter som endast trivs i naturskog är tickorna ullticka, Phellinus ferrugineofuscus, gränsticka, Phellinus nigrolimitatus och vedticka, Phellinus viticola.