Archaeological findings show that ski manufacturing goes back thousands of years in the Nordic region. There is a wealth of literature and film that deals with the subject, but it can be difficult to get an overall picture of how a specific type of traditional ski has been made. The starting point is the documentary "Skidmakaren i Gielas", where the viewer can follow Alfred Israelsson as he makes a pair of skis out of birch wood. However, the documentary lacks important information about how the skis are actually manufactured. Length, width and certain working steps are disclosed.

A product and design development of a household device which shall dry food waste has beencarried out in collaboration with Smedlund Miljösystem AB.This project has been implemented through several brainstorms and a questionnaire study.A great insight of how it is to work in a project in real work life has this project been givenme. This is a slightly less straight road to a conclusion than in the academic world that I amused to..

The Department of Forest Products and Management, Swedish University of Agricultural Sciences has received means from Vinnova for a preliminary study of the organisation of logging work of today and how a better logging organisation should be brought about. This thesis reports results from qualitative interviews with nine forest machine contractors regarding the situation of their companies. The interviews have been analysed with respect to the genesis of the companies, which tasks they perform or that they could consider perform-ing, business relationships of the companies, relationships between the different partners of the companies, and the state of competition experienced by the contractors. The companies have developed either from the contractor previously being machine operator employee or from that the contractor in making has owned a machine and needed work. Their primary business is mechanised logging.

When constructing an industrial- or hall building, the most common framework materials thatis used are wood, steel or concrete. Due to an assignment from Byggnadstekniska Byrån ABhas a document been created that makes it possible to investigate how the final costs is af-fected by gapes in between elements and which used foundation. And this with steel as thematerial. The purpose with this essay is to investigate which is the most well fitted materialwhen constructing an industrial- or hall building wood, steel or concrete. Information aboutthe different materials has been collected by litterateurs and by different internet pages.

Blood samples from 44 clinically healthy cats were analysed for the presence of antibodies to Chlamydophila felis. As we wanted to investigate if the antibody titre of clinically healthy cats correlates to shedding of chlamydia, conjunctival and vaginal or preputial swabs respectively, were taken and analysed with rtPCR (real-time polymerase chain reaction) for the presence of chlamydia DNA. Furthermore, to investigate possible epidemiological factors connected with asymptomatic cats infected with chlamydia and to see if there were any indications that chlamydiosis can cause reproductive problems, the owners of the cats were asked questions regarding this. Sixty-one per cent (27 of 44) of the cats were seropositive. Three of these (11 %) had the highest antibody titre (1:1600).

Holmen Skog AB is an important supplier of conifer pulpwood to the Iggesund Paperboard mill. After logging and transport to the landing by a forwarder, the wood is loaded on trucks for further transport, often by using separate loaders. During this handling process considerable amounts of stone material is sometimes mixed into the pulpwood and this causes problems for the industry. The aim of this study is to identify which part of the chain from forest to pulpmill, that contributes the most to this contamination. Sizes and total volumes of the contaminating stones were also investigated.

Stockholms vattenskärning AB in Kungsängen has through the acquisition of a company begun to design and produce aircraft heaters whose origin is early 1970s which follows a high inefficiency in terms of energy consumption and size.The aircraft heater, which is sold worldwide, serves its purpose for customer satisfaction and has done so ever since it was developed in the 70s.Stockholms vattenskärning AB is now investigating the possibility in making the aircraft heaters more efficient, both in terms of energy consumption but also on a more efficient design with the belief that it would lead them to an edge in the market. The aircraft heater consists of several main components whose function altogether is to keep passenger aircrafts warm while they are on the ground.This project has been limited to the further development of the heat exchanger package which accounts for the conversion of the hot medium to the fresh air being carried in to the aircraft cabin. Work has been divided into different phases in order to create a better understanding of the project range and to make it easier to divide the various elements in the time available, 10 weeks. These phases are literature review, situation analysis, concept generation, CAD, concept comparison and writing reports.After the initial literature review was made, a fundamental theory was written which is essential in understanding the remaining parts of the project.With the theoretical part as support, measurements and calculations were made on the current heat exchange package in a situation analysis to ensure its operation and efficiency.In the concept generation phase, the collected facts from the literature review was used as the basis for creating a matrix. The purpose of the matrix was to indicate the two most suitable types of heat exchangers to develop four new concepts out of.In the CAD phase the four concepts was drawn up and then described with text and images.The last phase is the concept comparison where a concept selection matrix is used to function as a decision basis for further production at Stockholms vattenskärning AB. The four concepts have been developed based on the current heat exchanger and is gradually changed into a design of a cross-flow heat exchanger constructed out of stainless sections. The purpose of this is to have gradual upgrading of the heat exchanger as an option, in order not to saturate the market..

Competition of spruce fiber raw materials has increased dramatically in the last few years, leading to the fact that transportation costs in the current situation represents a much larger share of the total raw material cost. The Holmen-owned pulp industry Hallsta Paper Mill's location on the coast also constitutes a problem, because of the lack of raw material, which is much larger there, than for a pulp mill located in the hinterland. For a coastal industry it?s therefore natural to import much of the raw material by boat or to buy it from the timber terminals, in order to maintain good profitability. The purpose of this study was to analyze how the size of Hallsta Paper Mill timber supply area, without competition, with competition and with terminal use, affects the company ?s transport costs.

The aim of the study was to install a biogas system consisting of three tubular polyethylene biogas digesters at a rural household in Malawi and to evaluate the constructed biogas system with regards to relevant system parameters. The purpose was to evaluate if the technology is a possible solution to reduce deforestation and support Malawi in climate change mitigation and adaptation. The study was carried out in the southern part of Malawi in cooperation with the University of Malawi. Locally available materials were used to construct and install the system. Three different feed materials, cow, goat and a mix of cow and goat manure, were used in order to determine which one was best suited to utilise as a digester substrate. After the installation, measurements of temperature, pH, biogas production, biogas composition and system functionality were made. The results of the study show that a biogas system with tubular polyethylene biogas digesters can be successfully installed at a rural household and that the most suitable feed material is a mix of cow and goat manure.

One hundred years ago, boys and girls in Sweden went to school in two parallel educational systems. The girl schools were privately owned and had two educational goals; education for the household and education for work outside the home. The girl schools were free to give the education they thought was right, but around the turn of the century women?s education became an issue of growing political interest.The purpose of my study is to shine light on the idea-political impact on the teaching in the turn of the century independent girl schools. I ask two questions; What types of subjects did girl school pupils write essays about, and how do they change over time? Seen from a genus perspective, what is the relation between the essay subjects and the idea-political trends at a higher societal level?I conduct a quantitative study of Swedish essay subjects at a girl school in Växjö between the years 1884-1929.

Piles of deadwood are often retained in forests after management to support the biodiversity ofsaproxylic organisms which depend on deadwood to survive. Any knowledge about the crucial role ofpiles as suitable habitat of saproxylic organisms compared to single distributed deadwood objects thatare around the piles would help conservation actors to motivate more forest owners to supportsaproxylic organisms during their management. Therefore to give facts to this the saproxylic fauna ofdifferent pile positions (up and low) was studied and compared to distributed deadwood samplesaround each pile. Our study was focused on saproxylic beetles. Some other parameters such asdiameter, deadwood volume, pile volume and decay stage were assessed to define any effect.

Many wood living insects are considered threatened by modern forestry due to the reduction in amount of dead wood. During the last decade various methods have been used to enhance the quantity of dead wood in managed forests. However little is known how and if these methods are aiding saproxylic insects. The threatened tenebrionid beetle, Upis ceramboides, is already extinct in southern Sweden. It develops in white rotted dead birch (Betula spp) and requires sun-exposed sites.

The background for my thesis is the fact that with rising electricity and oil prices it becomes interesting to calculate on alternative heating systems. I have chosen to calculate upon my parents? farm, which today heats the dwelling house with wood. This is very time-consuming work, time which could be spent on other work. The main objective for this study is to compare three different heating systems to decide how they differ considering effort and cost. The result from the calculations was that grain-heating system demanded the least amount of work, but the total cost was a little higher compared to chips heating. Chips heating required half as much work as today?s wood heating and had a little lower total costs compared with the corn heating. Which system to choose largely depends on how the own work is valued.

This bachelor thesis contains the findings of an investigation into the laying of wedge sawn wood flooring. The advantage of wedge sawn wood flooring is the usage of more material from each board reducing waste. The boards follow the natural profile of the tree where the root part of the board is wider, and the top part is narrower. The technique involves placing boards side by side with adjacent boards in opposite directions. The thick base of one board is neighbored by the narrow top of another, this creates a pattern of wedges in alternating directions, known as a ?root and top? system. Existing literature into this type of flooring is sparce.

Sweden is the country in Europe that receives most applicants from asylum seeking unaccompanied children. The majority of all unaccompanied children are boys and the two biggest sending countries are Afghanistan and Somalia. There is however a big difference between the proportion of unaccompanied girls between the two countries, Somalia with a big proportion of girls and Afghanistan with a low proportion of girls. Previous research has shown that there is a big knowledge gap about unaccompanied girls? migration.