Wood has always been an important material for people, and it is used for many applications. As for example, fuel for cooking and heating houses, construction materials and for constructing means of transport. Since wood also is a material that with time biologically degrades due to activity by micro organisms and wood fungi it is important to find ways to protect and further lengthen the life span of the material when in service. One method is to decrease the amount of water in the material by impregnation with an hydrophobic oil. The Linotech method which uses only pure linseed oil is one such possible method. The aim of this study was to investigate the possibility to at the same time impregnate and stain/colour wood samples of pine and spruce by using the Linotech method.

This master thesis consists of an investigation of the profitability per hectare in privatly owned forest land. The investigation is based on data collected from Skogsstyrelesen, Riksskogstaxeringen and Skogsforsk. During the last twenty years the prices on pulp wood and saw log have substantial decreased, but during the same time the the volumes from final felling have increased and the cost for felling has decreased, this investigation shows how the netprofit per hectARE after final felling has changed between year 1980-2005 This investigation shows that that the netprofit has stayed on a stable level during the years 1985-2005 even though prices pulp wood and saw log decreased. Much indicates that the demand of swedish pulp wood and saw log will continue to be strong or even stronger wich will give increased prices and an higher netprofit after final felling in the future.

Wood pellets are an upgraded product of residuals from several wood processing industries, for example saw mills and pulp industries. The pellets are produced by pressing the milled and dried sawdust to cylindrical units with a higher density than the initial raw material. Pellets have great benefits compared to the raw material: high energy per volume, good transport and storage properties and homogeneity. Several parameters collaborate in the whole process, which makes it complex. Wood is a heterogeneous material, chemically and structurally dependent on wood parts, habitat and storage procedures.

The purpose with this study is to compare different systems of grain storage from a financial point of view. Grain that is supposed to be fed to laying hens. The systems that were compared were different airtight storage of grain and a system of conventional storage. To make this case study I choose to compare four different systems. In the case study there was one system with bin drying of the grain, two systems with airtight storage of the grain and one system where you buy dried grain during the season. I made several of capital investment appraisal where I found the cost of each system, then I took the cost and divided it with the total grain use and calculated the cost for each kilogram of grain, and also the cost of the feed. Then I compared the cost from my case study with the cost of buying feed. All the systems except for one, gave a lower cost for the hen feed than buying feed from a dealer The best system, witch were bin drying lower the cost with about 80 000:- SEK.

To save energy it?s popular to build houses with low energy loss. In these houses the walls are keeping a lower temperature in the external side which leads to a higher relative humidity. In addition more material, such as wood studs, are used which means that there is more moisture to dry. More moisture in combination with higher relative humidity may pose a higher risk of microbial growth.

Dead wood is important for many species. The amount of coarse dead wood (diameter >10 cm) is much lower in managed forest than in unmanaged forests. Stumps constitute the largest proportion of the volume of coarse dead wood in managed forests. Since stump harvest for biofuel may increase, the amount of dead wood will decrease even more, which may threaten biodiversity. The first aim of this study was to compare the amounts of fine woody debris (FWD, .

The purpose of this study has been to evaluate whether a Low temperature bio-mass dryer could be integrated with the local district heating system in Malå. The aim is to increase the thermal efficiency of the cogeneration plant in Malå, by lowering the temperature of the cooling medium. Another benefit that comes from this is improved combustion efficiency at the power plant, since drying the fuel causes an Increase of the heating value.Simulations has been made in Excel, and with use of linear regression, to find out if it is profitable. Data for this purpose has been supplied by the power company Skellefteåkraft and furthermore SMHI.The result of the Calculations shows that a very efficient bio-mass dryer is needed, if yield of investments should be made possible. An Investment of 4,27 Mkr, in a dryer, could at a such criterium return 60000 kr/year, if the price of the biomass is 190kr/MWh.

The private forest owners play a key role in the supply of round wood to the Swedish forest industry. Today it is a keen competition between forest companies about the wood from private forest owners. In order to get access to the wood from the private forestry you need to be an attractive collaboration partner, who can offer long-term collaboration, service at top-level, and acting for good prices to the forest owners. This work aims at analysing the situation on the market today. It gives Sveaskog purchase department a good view of the forest owners? opinion in general about the existing purchase activities. Forestry service level and timber prices are determining factors for a successful relationship between forest company and forest owner.

The basic ingredient of paper is the individual wood fibers. The property of the fibers depends on a variety of factors e.g., method of pulp production and processing. The final sheet quality depends in part on how the fibers interface between each other and therefore factors that affect the fiber size are of interest.The flexibility of the fibers depends in part on the pore water i.e., the fiber swelling. The sheet becomes less flexible at low water content which gives a loss in strength. Thus it becomes desirable to increase the water uptake.The experimental investigation described in this report consists of exposing the wood fibers to different ions and ionic strength and then measure the pore size by thermoporosimetry where a DSC (Differential Scanning Calorimeter) is used.

What is located on the bottom in the water outside of Birka? Remains of a water palisade or jetties and other constructions.Birka a Viking Age town that existed between AD 750 and 975 was located on the northwestern part of the small island of Björkö, in the Mälar archipelago of the Baltic Sea in Sweden. The Town was protected onshore by a hill fort and a town rampart. It is a widely spread assumption that Birka had a water palisade as a part of its defense. There are logs and other remnants on the bottom of the lake dating back to the Viking age.

When harvesting ley you hope to get a fast drying and a faster harvest. If there is a system with round bales, you need to have a dry matter close to 45 %. To make this as fast as possible, there is made a machine which pick up the grass with an pick-up. It turn the grass over and put it behind the machine (figure 2 and 4). There are few tests to prove the efficiency of this machine.

Disturbances, such as fire and wind, are important for saproxylic beetles (= beetles depending on decaying wood) to gain substrate in boreal forests. Clear-cutting is an example of a man-made disturbance. Measures such as prescribed burning have been made to resemble natural disturbances. The aim of this study was to see which clear-cut characteristics are important for the occurrence of the saproxylic beetle Upis ceramboides. This is a species favored by open habitats and is said to respond positively to forest fires. The distribution area in Sweden for this species has decreased during the last two centuries and I wanted to see if there were differences between clear-cuts in Hälsingland, where it is very rare and decreasing, and Norrbotten where this study was conducted.

The forest in the county of Småland has been utilised for a long time. One of the most important forms of utilisation of wood has been charcoaling for the benefit of the iron industry. Shortage of forest in relation to the iron industry, was discussed already in the 17th century in Sweden. The aim of this study was to analyse the purchase and consumption of charcoal at Storebro Bruk, an ironwork in Småland, during the period 1793-1850, as well as analyse the shortage of forest at the time. To determine the utilisation of the forest in the area, I have used historical sources from Storebro Bruksarkiv.

This study was made for the round wood transport company MT Transport AB. Time studies were made in order to analyze time consumption on the mill site for timber trucks delivering round wood at the Södra Cell Mörrum mill. The most interesting was to see how much of the time spent at the factory that was waiting time. In three weeks the study was going on and the drivers were clocking it themselves..

Old hollow trees of oak contain a large amount of wood mould. Unfortunately, these trees have in the last century been greatly reduced in numbers. It has resulted in that species that depend on these habitats, saproxylic species, have become at risk to decrease in numbers or die out regionally. Previous studies have shown that the volume of wood mould is an important factor for occurrence and population size of saproxylic organisms. The aim of the present study was to examine how the volume of wood mould varies among ash (Fraxinus excelsior), lime (Tilia sp.), maple (Acer platanoides), aspen (Populus tremula) and oak (Quercus robur).