This thesis engages the topic of test methods for wood adhesives. Two test methods were evaluated, EN 302-1, a European standard, and ASTM D905, an American standard. The total amount of specimens manufactured and tested was more than 500. The adhesive bonds were tested in shear with an increasing load on the specimen until failure.The adhesives used were epoxy-resin, phenol-resorcinol-formaldehyde and a 2-K polyurethane. The test programme included five different types of intentional errors per method, in order to investigate the sensitivity of the test methods.

Tomo Hugglink (TOMO Skog) is an innovation for harvest and transport of biofuels. The system consists of a truck, a chipping unit and crane mounted on a link and a wood chip trailer. The system works in such a way that the chipping unit is disconnected and placed on the site and wood chips are loaded directly into the wood chip trailer.The aim of this study was:- To examine the performance of the TOMO Hugglink system under different conditions such as the size, placement and quality of the pile.- To calculate the cost per raw ton for two vehicle combinations at different transport distances and to examine the effect of a reduction in set-up time and an increase in load weight.- To identify possible improvements with the TOMO Hugglink system.A time study was conducted within the thesis work to make it possible to determine production and time consumption. In the subsequent economic analysis the cost per tone at different transport distances was calculated for two different lorry concepts. Furthermore the effect of a reduction in set-up time and an increase in load weight was calculated.Under current conditions the utilization of the chipper is low and only 29 % of the total system time is occupied by chipping.

Fuel pellets are in Sweden mainly produced from sawdust and cutter shavings. Before the pelletising process the raw material is dried to attain consistent moisture content and ground up in a hammer mill. In the densification process (pelletising) the ground material is forced through holes in a rotating die. This heats up the wood particles which cause them to soften and self bond. After the process the pellets are cooled, sieved and bagged. The milling process creates a wide range of particle sizes.

In this work I have tried to reconstruct the forest history within Särna-Idre forest common in northern Dalarna from the 19th century until present time. The Särna-Idre region has been an extensively used landscape for a long time. Pollen which indicates grazing has been found in samples orginating from the 10th century. Early travellers from the 18th and 19th centuries seem to have been passing trough a "used" landscape. Burned forests on naked ground are described as common. Also large areas are mentioned as undisturbed with lots of large trees, snags and dead wood.

Syftet med denna uppsats är att analysera mansbilden av karaktären Edward i filmen Edward Scissorhands (Tim Burton, 1990). Genom attstudera hans personlighet och egenskaper ur olika perspektiv, som kan uppfattas som både manligt och kvinnligt, har jag försökt att ta reda på vem denna utstickande karaktär är.Med hjälp av genusteorier och jämförelser av tidigare filmatiseringar som Ed Wood (Tim Burton, 1994), Sleepy Hollow (Tim Burton, 1999) och The cabinet of Dr. Caligari (Robert Weine, 1920) har jag även kunnat fördjupa mig i mansbilden av Edward. Jag har dessutom fokuserat kring Tim Burtons säregna filmskapande, men också kring stjärnskapet hos Johnny Depp, skådespelaren som Burton ofta samarbetar med.Edward Scissorhands har visat sig vara en man med både manliga och kvinnliga attribut, vilket gör honom till en icke stereotypisk man som saknar hjältemod och en muskulös kropp. Trots det så tyder inget på att han är mindre man bara för att han har mer eller mindre egenskaper som generellt uppfattas som manliga.

Composting is a process in which organic matter is mineralized by microorganisms. In January 2005 landfilling of organic waste was prohibited in Sweden. With this prohibition composting has become an important alternative to handle the produced organic wastes. One problem with continuous small-scale composting is the production of organic acids that will inhibit a further composting process. The aim of these theses was to study what effects temperature and dry matter content had on the production of organics acids, and what effect the organic acids had on the mineralisation of the substrate as well as the stability during storage of the product.

In three areas in the province of Småland studies has been done to investigate how big damage the moose may do to P. abies. An inquiry examination and two different types of surveys were done to find out how big area, which volume and which financial consequences the moose debarking has had on the forest. When the volume was calculated the rot spreading was included. The area that was damaged was stipulated with the answers from the inquiry examination. 59 % of the asked forest owners answered the inquiry.

Lack of dead wood is the main cause of decaying or loss of populations for many forest species. To increase the amount of dead wood is a prerequisite to maintain biodiversity in forests of northern Europe. In summer 2006 the recreation area Klåveröd, at Söderåsen in Skåne, Sweden, has been inventoried for high stumps (snags) of beech, (Fagus sylvatica). The result of the inventory has been compared with data of the real estate and forest management directories from the owner, region Skåne. The results have also been matched with the results from an inventory of saproxylic beetles in 2005, performed with windowtraps on selected snags both in the area and the adjacent national park Söderåsen. 594 snags were found on 747 ha.

Uppsats för avläggande av filosofie kandidatexamen iKulturvård, Konservatorprogrammet15 hpInstitutionen för kulturvårdGöteborgs universitet2012:29.

AbstractThe aim of this examination paper is to get an overview on the ?no-maintenance? windowsthat exist on the Swedish market, like plastic and aluminium windows.By way of introduction the reader gets knowledge in the background and problemformulatethat this subject has. This introduction explains why it has become so popular to changeyour windows into plastic- and aluminium windows and there is an existing scepticismagainst PVC and aluminium as construction material for windows.The main part of this report is constructed by segments of interviews where bothproducers of windows and stakeholders gets to answer questions about their viewing onno-maintenance windows from a material and construction point of view and where theproduction is headed to in the future. This is followed by an evaluation of a questionnaireon how pleased the house owners that changed their old windows to no-maintenancewindows are, followed by an inspection of windows made up from wood and an aluminiumclothing, windows made from only aluminium and PVC-based windows. It ends with atheory part about the materials PVC and metal based upon facts included in literature.By reading this report you can draw the conclusion that no window can be entirely nonmaintenancebut that the materials PVC and aluminium still are good substitutes for woodto lessen the maintenance..

The aim with this study was to investigate mortality in older respectively younger beech stands (Fagus sylvatica), the different types of dead wood in the forest and the availability of coarse woody debris (CWD). The research was carried out in previously managed and seminatural stands in Biskopstorp and Frodeparken, located north of Halinstad in Halland,Sweden. Data were collected from 22 stands with at least 50 % beech and with a minimum age of 5 1 years, ranging in size from 0,67 to 19,9 ha. A transect was placed in each stand, in which the diaineter on both dead and living trees with a minimum diameter of 50 mm was recorded. On seven to 13 dead trees, depending on the size of each stand, decomposition stage, primary and secondary cause of death, amount of fungi and the type of the dead wood was noted.

The objective of this thesis was to investigate what influence nature conservation measures taken at regeneration felling. Factors analysed were the forest owners´ situation and their characters, and information activities from wood-suppliers and the Regional Forest Board (RFB). The inventory was performed with a posted questionnaire followed up by telephone to forest owners and a posted questionnaire to wood-buyers. The forest owners were grouped in three strata, depending on the quality results (D- polytax inventory) of the taken forest conservation measures, and for this investigation forest owners were sampled from the population in the tree groups. In total 73 % (41/56) of the sampled forest owners answered the questionnaire Group A (17 answers): Good judgement Group B (19 answers): Bad judgement Group C (5 answers): This group was formed from the forest owners that were informed, by RFB, about nature conservation measures and culture history consideration before the regeneration cutting.

Nature conservation on certified small private forest owners- a comparison between the two certification systems FSC and PEFC in southern Sweden Today two different certification systems are used in Sweden to certify forest, FSC (Forest Stewardship Council) and PEFC (Pan European Forest Certification). During the last years certification of forests in general and different certification systems have frequently been debated. FSC is a globally widespread system and about 10 million ha out of 23 million ha Swedish forest is FSC-certified. The FSC-standard is mainly used by major forest companies and to some extent also by smaller private forest owners. PEFC is a European system and about 2 million ha Swedish forests is PEFC-certified today.

I have chosen in this work to examine which factors are affecting the artificially creation of a tree cavity containing decomposed wood. The purpose of the work is to find out which factors are affecting the most when a tree cavity is created, and to apply these results when you artificially try to create a tree cavity. The need to create tree cavities comes from the situation where many tree cavity living beetles finds themselves today. When existing trees are to pass out there will be no suitable inheritors yet. The work was initially to focus on cavities created from cut branches.

Today there is a widespread opinion that the woodmarket and the forest industry are dominated by a traditional way of thinking and not adapted to the customers of today; a lot of products are produced purely on routine. Also, there is a demand for improving the quality of sawn woodproducts. AB Karl Hedin wants to sort this out by increasingly adapt their products to the demands of the market, i.e. through introducing a short wallstud of standard length, "Hedinregeln". At tirst, the wallstud will be produced in lengths of 2,70 m and of guaranteed quality.