Denna studie handlar om pelletering som möjlig lönsam marginalaffär vid mindre sågverk/hyvlerier. Studien, vilken skett genom djupintervjuer på plats, omfattar fem olika mindre sågverk/hyvlerier i Småland. Verksamheterna är sinsemellan på många sätt olika men har samtliga satsat på pelletering av ekonomiska skäl och av miljöskäl.Studien visar att pelletering är lönsam men också att det krävs vissa förutsättningar för att långsiktigt nå denna lönsamhet. Den viktigaste är långsiktig tillgång till råvara i form av torrt spån men det krävs även ett genuint intresse och en stor kunskap inom såväl teknik som trä för den som skall pelletera Detta beror på att produktionsprocessen är mycket komplicerad och även beroende av en del yttre omständigheter som t.ex. fukt, kyla och torka.

When the producers? responsibility for packaging was introduced in Sweden in 1994 the industry set up public recycling stations to facilitate the collection of the waste material. In order to establish recycling stations at suitable locations the municipalities assist the industry?s service organization for operation of the recycling stations, the Package and Newspaper Collection Service (Förpacknings- och tidningsinsamlingen, FTI). The objectives of this thesis are to improve the service of the public recycling stations within Lidingö town and to increase the accessibility to these stations for the inhabitants of Lidingö.

Sweden?s District councils and Country councils are in itself to a large extent responsible for the state financed welfare. Because of this, Sweden has a contribution- and adjustment system. The reason for this system is to create equal chance, for all District councils and Country councils, to be able to give the citizens service independently of their income and non-influential structural differences. The adjustment is built upon the so-called standard cost method, which contains four different parts.

Då en pappersrulle har partier där pappret är längre kallas det ibland för slappa stråk. Det finns flera orsaker till slappa stråk och en av dessa orsaker är att pappret har en ojämn tjockleksprofil. I dessa fall uppstår de slappa stråken eftersom den ojämna tjockleksprofilen gör att pappersrullen på de positioner där pappret är tjockare får en större diameter än i övrigt. Då papper rullas över dessa åsar eller valkar som har en större diameter töjs pappret ut och då det rullas av rullen är det slappt. Körbarhetsproblem till följd av att pappret är slappt i vissa partier är ett stort problem inom pappersindustrin.

The market for biofuels from the forests have had a positive development and the job initiators for this master´s thesis wanted to examine the profitability of a method for harvesting forest fuel, which was unfamiliar to them. The method was the ?long tree tops-method?, here called the LT-method. The LT-method is characterised by the fact that timber is harvested as the only roundwood assortment while the rest of the stem, which in other cases would become pulpwood, is harvested as forest fuel together with the logging residues. The method is based on the assumption that advantages in handling of the forest fuel assortment such as increased load weights for forest hauling and truck transportation, should compensate for the lower price for pulpwood when sold as forest fuel. The aim of the study was to compare the profitability of the LT-method with the GROT-method (harvest of timber, pulpwood and logging residues) and conventional logging without any harvest of forest fuel, and aslo to try to identify factors affecting the profitability of the different methods.

ADORABLE CHILD OF ITS TIMEThis text will describe a inovative project about material, traditions and someideas about furniture for work in an home inviroment. The content is partlyabout exploring ancient marine- and textile techniques to find somethinguseful for furniture of the twenty first century. It is also about the designprocess of creating a sustainable piece of furniture that questions the paradigmathicsabout usage and the context about manufacturing furniture.The text will briefly describe the design process and then reason about theresult in a deeper sense. Questions that has been considered from the verybeginning of the project as well as those one stumbled across during theevolution of the work will be objectives for the discussion. The result will bein focus as a foundation for the discussion and also the values and issuesabout that.

The retailing industry has an extremely high density of brands. In order to differentiate its offer, both retailers and suppliers, are constantly forced to come up with new ways to launch their products. A collaborative strategy between two brands is called co-branding, which means that both the private label and the supplier's brand are displayed on the new product packaging. Several studies have shown that a co-branding strategy is successful, but many operators are still reluctant to use co-branding in fear of long-term losses due to potentially damaged business relations. The objective of this study is to explain how the product- and brand related value for customers, retailers and suppliers is affected by co-branding between private labels and national brands.

Rapporten ingår i ett FoU- projekt för Högskolan Dalarna, där målet är att ta fram en konstruktion utan ångspärr som ska klara dagens mått på lufttäthet och fuktkrav.Syftet med denna rapport är att utreda hur fukt påverkar en byggnad medmassivträstomme och olika isoleringsmaterial utan ångspärr. Mineralull och träfiberisolering jämförs mot varandra för att se hur dessa påverkarfuktbelastningen i en väggkonstruktion. Testobjektet är lokaliserat i Dalarna, inget fukttillskott har funnits inomhus i byggnaden.För att genomföra detta arbete har tre stycken olika metoder används. Ensimulering, verkliga uppmätta värden och en provtagning. Fuktsimuleringen genomfördes med hjälp av programmet WUFI, uppmätta värden i form av relativ fuktighet och temperatur har samlats in kontinuerligt under två års tid från väggkonstruktionen via mätsensorer.

I början av varje nytt projekt stöter man på de olika alternativ av stomme- och bjälklagskonstruktioner som finns att välja mellan, och frågan blir ofta vilken alternativ som är optimal för den aktuella projekteten.Den optimala lösningen för varje projekt existerar inte, på grund av de olika faktorer och förutsättningar som styr projektet, till exempel: ekonomi, typ av byggnad, terrängtyp etc.Frågeställningen i denna rapport är om limträ eller betong är den mest optimala alternativen som stommaterial i det aktuella projektet.Jämförelsearbetet utgående från förutsättningar har gjorts genom att dimensionera delar av ett projekt med både materialen. Fokus har lagts på skillnader i byggnadshöjd, vindstabilitet och grundläggningen. Resultaten tyder på om man ska bygga ett kontorshus eller flervåningshus vore betong mer lämpligare alternativ jämfört med limträ.Skillnaden i byggnadshöjd finns men är förvånansvärt inte så stor mellan de två olika stommaterial. Dock skillnaden varierar avsevärd när det gäller bjälklagshöjd mellan limträ och betong. Detta pga krav på nedböjning och svikt som ställs på limträbjälklag.Båda stommaterial klara vindstabiliteten utan plintar, som är ganska intressant speciellt med tanke på limträets låga vikt.När det gäller grundläggningen, blev skillnaden betydlig större mellan limträ och betong.Dimensionering enligt Eurokoder har gjorts genom egna handberäkningar och även användandet av programvaran Strusoft..

In Sweden, harvesting pre-commercial thinning (PCT) stems for energy purposes is a interesting way of financing the high cost of preparing dense stands for a profitable first conventional thinning. This concept can be labelled bioenergy thinning. The aim of this study was to quantify the productivity of a Vimek 404R light harvester with an accumulating Naarva-Grip cutting head during the bioenergy thinning of a self-regenerated stand west of Sunnansjö in Dalarna. The stand was birch-dominated, contained 15 371 stems/ha, and measured on average 4,6 cm Dbh and 7 m tall. Even though the driver was well experienced with the machine, the stand in question was the first one that he ever thinned in this manner. Nevertheless, the driver strived to accumulate as many stems as possible during each crane cycle and chose to cut taller stems in half so as to make the handling and forwarding of the harvested stems easier.

An increasing demand for wood products in China has resulted in large areas invested in fast-growing tree plantations of eucalyptus. Eucalyptus plantations are often associated with an intensive management including fertilization. By understanding the effects of fertilization and where in the ecosystem nutrients are accumulated a more sustainable forest management could be achieved. In this study, a nutrient budget including all biomass and soil components was created for Eucalyptus urophylla. The examined nutrients were nitrogen, phosphorus and potassium.

Inside the south Swedish national park Dalby Söderskog, wild boars (Sus scrofa L.) have been visiting since 2010. The presence of wild boars has earlier been proven to impact both soil and vegetation characteristics, both positively and negatively. Still, there is a lack of knowledge regarding the rooting effect on the vegetation in deciduous forest within the native range. In this study, I have compared the field vegetation collected before and after the invasion of wild boars in 74 permanent experimental plots. More specifically, the study aimed to qualify the effect of wild boar rooting on cover ratio, species richness and species composition in a temperate deciduous forest.

When the Swedish Forestry Act was changed in 1994, brushing of young stands became non mandatory. Since then the annual need for brushing in the country has increased by about 100 000 hectares per year. In later years the price for biomass energy has increased to the same level as pulp wood. The high price on biomass energy and the large areas of stands in the need of brushing has created a new market with its own technical, economical and environmental conditions. There is a development of various techniques to manage the forestry stands with late brushing.

There have previously been very few studies of forests on Seram Island in the Eastern Indonesian archipelago and none before on lowland limestone primary forests. The COLUPSIA project on collaborative land use planning has therefore chosen Seram as one of two project sites. The objective of the COLUPSIA project is to establish collaborative and equitable land use planning. In order to achieve its objective the COLUPSIA project aims to improve understanding of traditional resource management and how it interacts with governmental systems, as well as enhancing knowledge about tropical landscapes and ecosystem services.The aim of this study was to contribute to the COLUPSIA project through describing lowland limestone forest on Seram Island in respect to (1) forest structure, (2) tree species richness and (3) tree species composition. We set up 5 plots, each of 0.2 ha, at one site, Mawalai, and collected data on tree variables (tree diameter ?10 cm) as well as for some other life forms and environmental data.

To achieve the requirements to decrease emissions of greenhouse gases by 20 % by 2020, Swedenneeds to increase its use of bioenergy. In doing so it seems natural that those who already haveaccess to large amounts of biofuels in the form of by-products such as straw, wood chips anddigestible materials take advantage of these assets locally. By combining production of heat withpower production at the farm it may be possible to not only reduce the direct use of fossil fuel forheating but also reduce energy costs.The purpose was to simulate different cases of using a small scale biofueled combined heat andpower plant for farm-based systems. A MatLab-model was developed and used to draw conclusionsabout the costs for production of heat and electricity with different conversion technologies.The model uses climate data to simulate the variations in heat energy demand on a day-to-day basis.The given heat demand is the base of the simulation and from this the possible electric output iscalculated. This study has focused on the impact of the following properties: electric-, heat- andtotal efficiency, fuel, fuel price and specific fuel requirements.